rjuniod
(Ricardo Daleprane)
February 27, 2018, 8:40pm
1
I have a Digium card of the following model Digium, Inc. Wildcard TDM2400P.
While using Version 13 of FreePbx it worked perfectly.
After updating the system, it is no longer recognized.
Through the commented lspci I verify that it is recognized by the computer.
What can I do to resolve this issue.
Ricardo
dicko
(dicko)
February 27, 2018, 9:10pm
2
You will need a dadhdi version that is recognized by your running kernel.
PitzKey
(Itzik)
February 27, 2018, 10:17pm
3
Did you read these posts?
I’ve tried the distro-upgrade on two systems (my own and one of my clients). Each system is VMware ESXi based and has DAHDI hardware passed-through from the host to the vm. In each instance the upgrade killed the DAHDI config.
On a system with a Digium Wildcard TDM410 there was no hardware found.
On a system with a Sangoma A200, the card showed up but wasn’t configurable.
In each instance, thje Dahdi config screen complained that Dahdi wasn’t running
Doing a dahdi_cfg -vvv
Results in:
Noti…
system
(system)
Closed
February 27, 2019, 10:17pm
4
This topic was automatically closed 365 days after the last reply. New replies are no longer allowed.