EPM issue Grandstream GXP-2130

Commercial Modules
1

I’m having an issue with a new distro of FreePBX (PBX Firmware 5.211.65-11 and version 2.11.0.35) with EPM (version 2.11.0.1.67) I’m trying to use the EPM to provison my Grandstream GXP-2130 with no luck so far. I’ve been looking around at other threads and so far have managed to ensure that my tftp service is running,

cat /etc/xinetd.d/tftp
returns

default: off

description: The tftp server serves files using the trivial file transfer \

protocol. The tftp protocol is often used to boot diskless \

workstations, download configuration files to network-aware printers, \

and to start the installation process for some operating systems.

service tftp
{
socket_type = dgram
protocol = udp
wait = yes
user = root
server = /usr/sbin/in.tftpd
server_args = -s /tftpboot
disable = no
per_source = 11
cps = 100 2
flags = IPv4
}

which I think is ok?

did a service xinetd restart
got the “ok” on that,

I have my grandstream phone pointed at my freepbx server for configuration and provisioning, and I have the extension set up and mapped in EPM. Not sure what i’m doing wrong. any help would be greatly appreciated.

2

or the commercial version?

3

Since he wrote “…new distro of FreePBX (PBX Firmware 5.211.65-11 and version 2.11.0.35) with EPM (version 2.11.0.1.67)…” I think you can assume that he’s almost certainly using the FreePBX Endpoint Manager (EPM) commercial module and not the OSS one (which is unsupported).

4

Yes, I moved it to the right forum.

5

sorry about that, didn’t realize there was a forum specifically for commercial products. thanks for moving it!