hi Team,
I am using EPM commercial and I want to use cisco 7940 firmware but I was unable to use it via the default Cisco 7940 firmware then I tried to setup the custom firmware follwoing the guide
https://wiki.freepbx.org/display/FPG/EPM-Admin+User+Guide#EPM-AdminUserGuide-firmwaremanagementFirmwareManagement
but still not able to get the phones registered.
please find below the response for the following:
Feb 27 15:06:28 voipline2 in.tftpd[99617]: RRQ from 172.16.24.122 filename SIPDefault.cnf
Feb 27 15:06:28 voipline2 in.tftpd[99617]: Client 172.16.24.122 finished SIPDefault.cnf
Feb 27 15:06:28 voipline2 in.tftpd[99618]: RRQ from 172.16.24.122 filename SIP0015C614A3F3.cnf
Feb 27 15:06:28 voipline2 in.tftpd[99618]: Client 172.16.24.122 finished SIP0015C614A3F3.cnf
Feb 27 15:06:30 voipline2 in.tftpd[99620]: RRQ from 172.16.24.122 filename RINGLIST.DAT
Feb 27 15:06:30 voipline2 in.tftpd[99620]: Client 172.16.24.122 File not found RINGLIST.DAT
Feb 27 15:06:30 voipline2 in.tftpd[99621]: RRQ from 172.16.24.122 filename dialplan-0015C614A3F3.xml
Feb 27 15:06:30 voipline2 in.tftpd[99621]: Client 172.16.24.122 finished dialplan-0015C614A3F3.xml```
15:04:47.457589 IP 172.16.24.122.50797 > voipline2.tftp: 31 RRQ “CTLSEP0015C614A3F3.tlv” octet
15:04:47.479990 IP 172.16.24.122.50798 > voipline2.tftp: 32 RRQ “SEP0015C614A3F3.cnf.xml” octet
15:04:47.510880 IP 172.16.24.122.50799 > voipline2.tftp: 28 RRQ “SIP0015C614A3F3.cnf” octet
15:04:47.565164 IP 172.16.24.122.50800 > voipline2.tftp: 23 RRQ “SIPDefault.cnf” octet
15:06:27.999193 IP 172.16.24.122.50785 > voipline2.tftp: 23 RRQ “SIPDefault.cnf” octet
15:06:28.115397 IP 172.16.24.122.50786 > voipline2.tftp: 28 RRQ “SIP0015C614A3F3.cnf” octet
15:06:30.895192 IP 172.16.24.122.50795 > voipline2.tftp: 21 RRQ “RINGLIST.DAT” octet
15:06:30.905324 IP 172.16.24.122.50796 > voipline2.tftp: 34 RRQ “dialplan-0015C614A3F3.xml” octet
Directory:
/tftpboot/cisco/1/P0S3-8-12-00
Files
OS79XX.TXT P003-8-12-00.bin P003-8-12-00.sbn P0S3-8-12-00.loads P0S3-8-12-00.sb2