EndPoint Manger Yealink phones

i am not sure where the appropriate place is to post this so i will try here.

When using Yealink t2x phones with freepbx, the default template uses different * codes for call forward on/off and call forward busy on/off than what is configured in freepbx. we routinely have to go in and modify the template before generating configs for the phones. is there a reason for this mismatch? and if not, can the template please be modified to match the * codes in freepbx?

  1. For Line Keys, the following types are valid:
    Line
    Speed Dial
    BLF
    BLF List
    Voicemail
    Pickup
    Group Pickup
    Call Park
    Intercom
    DTMF
    Prefix
    Local Group
    XML Group
    XML Browser
    LDAP
    Broadsoft Group
    Conference
    Forward
    Transfer
    Hold
    DND
    Redial
    Call Return
    SMS
    Record
    URL Record
    Multicast Paging
    Group Listening
    Public Hold
    Private Hold
    Shared Line
    Hot Desking
    ACD
    Zero-sp-touch
    In particular, I need to be able to make one of them a Call Park key.

  2. For Line Keys, if the type is BLF, then you should be able to specify a display Label.

  3. The configuration file doesn’t get created with the correct AdminPassword specified in the Template Editor.