I need help with getting DPMA setup so that I can config my Digium IP phone. I cannot get a license key, and I need help to figure this out.
What license key? For a Digium D65 you dont need a license for EPM…it’s free.
I cannot get it to work though. Is it because I am running on Debian and using FreePBX 17?
Can you please describe the steps you’re taking?
Did you install the res_digium package?
Run dpkg --get-selections | grep digium, you should see something like this:
asteriskXX-res-digium-phone
If it’s installed, you should be able to configure it by going to the Endpoint Manager module and then to Global Settings - DPMA Management
So i got the digium phone package, but I cannot get endpoint manager to work at all. supposedly it is supposed to be free for digium phones. I tried installing the sysadmin module, but I get an error stating that sysadmin rpm is out of date.
can you paste the error please?
fwconsole ma list | grep -E 'sysadmin|endpoint'
but I get an error stating that sysadmin rpm is out of date.
If you are using SNG7 distro then please perform yum update sysadmin* .
I am using debian 12.
This is what happened when i ran the command.
Did you try to run downloadinstall instead of install ?
fwconsole ma downloadinstall sysadmin --tag 17.0.2.12
And then endpoint manager:
fwconsole ma downloadinstall endpoint --tag 17.0.2.10
Same issue.
We’ve deployed about six newer Digium phones on the recommend of Sangoma staff.
They came out of the box in a boot loop and it got worse from there. They continue to be a problem to this day and my request to return them was ignored.
Unless you are very, very committed to them, my advice is to use different handsets.
Caveat emptor, YMMV.
1 Like
“Newer Digium phones”…what do you mean? There are no newer Digium phones. I use dozens of D65s with freePBX 15 servers, stable & solid. Great phones!!!
I got them working. I just needed to reinstall the system.
1 Like