DAHDI fault tracing Sangoma A200

Just carried out some module updates and found that i am now getting the ‘all circuits busy’ on our analogue line

Outbound routes still in place, A200 card still seen but placing a call does not show up in the logs, so i cant see where its stopping is there any other way of seeing the call progress

All Sip lines work its just our main line, wont accept incoming or outgoing calls.

dahdi show channels

James, show channels not working

[[email protected] ~]# dahdi show channels
-bash: dahdi: command not found

[[email protected] ~]# service dahdi status

Span 1: WRTDM/0 “wrtdm Board 1” (MASTER)

1 FXO FXSKS (In use) (EC: WANPIPE_HWEC - INACTIVE) RED
2 FXO FXSKS (In use) (EC: WANPIPE_HWEC - INACTIVE) RED
3 FXO FXSKS (In use) (EC: WANPIPE_HWEC - INACTIVE) RED
4 FXO FXSKS (In use) (EC: WANPIPE_HWEC - INACTIVE) RED
5 EMPTY
6 EMPTY
7 EMPTY
8 EMPTY
9 EMPTY
10 EMPTY
11 EMPTY
12 EMPTY
13 EMPTY
14 EMPTY
15 EMPTY
16 EMPTY
17 EMPTY
18 EMPTY
19 EMPTY
20 EMPTY
21 EMPTY
22 EMPTY
23 EMPTY
24 EMPTY
[[email protected] ~]#

From the Asterisk CLI, try

Dave, thanks

over thinking again

Chan Extension Context Language MOH Interpret Blocked In Service Description
pseudo default default Yes
1 from-analog en default Yes
2 from-analog en default Yes
3 from-analog en default Yes
4 from-analog en default Yes