PBX Firmware: 3.211.63-5
Analog extensions can receive a call from a sip phone, however from the analog cannot call a sip extension.
From the analog I can dial an external number, I can dial a ring group and reach a sip extension within the ring group, but cannot dial the extension directly.
Dialing an analog extension from the analog just returns dial tone.
It’s a Sangoma A200 card, 2 fxo and 2 fxs,
Log info…
– Starting simple switch on ‘DAHDI/3-1’
– Executing [03@from-internal:1] Macro(“DAHDI/3-1”, “user-callerid,LIMIT”) in new stack
– Executing [s@macro-user-callerid:1] Set(“DAHDI/3-1”, “AMPUSER=210”) in new stack
– Executing [s@macro-user-callerid:2] GotoIf(“DAHDI/3-1”, “0?report”) in new stack
– Executing [s@macro-user-callerid:3] ExecIf(“DAHDI/3-1”, “1?Set(REALCALLERIDNUM=210)”) in new stack
– Executing [s@macro-user-callerid:4] Set(“DAHDI/3-1”, “AMPUSER=210”) in new stack
– Executing [s@macro-user-callerid:5] Set(“DAHDI/3-1”, “AMPUSERCIDNAME=cordless”) in new stack
– Executing [s@macro-user-callerid:6] GotoIf(“DAHDI/3-1”, “0?report”) in new stack
– Executing [s@macro-user-callerid:7] Set(“DAHDI/3-1”, “AMPUSERCID=210”) in new stack
– Executing [s@macro-user-callerid:8] Set(“DAHDI/3-1”, “__DIAL_OPTIONS=Ttr”) in new stack
– Executing [s@macro-user-callerid:9] Set(“DAHDI/3-1”, “CALLERID(all)=“cordless” <210>”) in new stack
– Executing [s@macro-user-callerid:10] GotoIf(“DAHDI/3-1”, “0?limit”) in new stack
– Executing [s@macro-user-callerid:11] ExecIf(“DAHDI/3-1”, “1?Set(GROUP(concurrency_limit)=210)”) in new stack
– Executing [s@macro-user-callerid:12] GosubIf(“DAHDI/3-1”, “7?sub-ccss,s,1(from-internal,)”) in new stack
– Executing [s@sub-ccss:1] ExecIf(“DAHDI/3-1”, “0?Return()”) in new stack
– Executing [s@sub-ccss:2] Set(“DAHDI/3-1”, “CCSS_SETUP=TRUE”) in new stack
– Executing [s@sub-ccss:3] GosubIf(“DAHDI/3-1”, “0?monitor_config,1(from-internal,):monitor_default,1(from-internal,)”) in new stack
– Executing [monitor_default@sub-ccss:1] GotoIf(“DAHDI/3-1”, “0?is_exten”) in new stack
– Executing [monitor_default@sub-ccss:2] StackPop(“DAHDI/3-1”, “”) in new stack
– Executing [monitor_default@sub-ccss:3] Return(“DAHDI/3-1”, “FALSE”) in new stack
– Executing [s@macro-user-callerid:13] ExecIf(“DAHDI/3-1”, “0?Set(CHANNEL(language)=)”) in new stack
– Executing [s@macro-user-callerid:14] GotoIf(“DAHDI/3-1”, “1?continue”) in new stack
– Goto (macro-user-callerid,s,27)
– Executing [s@macro-user-callerid:27] Set(“DAHDI/3-1”, “CALLERID(number)=210”) in new stack
– Executing [s@macro-user-callerid:28] Set(“DAHDI/3-1”, “CALLERID(name)=cordless”) in new stack
– Executing [s@macro-user-callerid:29] Set(“DAHDI/3-1”, “CDR(cnum)=210”) in new stack
– Executing [s@macro-user-callerid:30] Set(“DAHDI/3-1”, “CDR(cnam)=cordless”) in new stack
– Executing [s@macro-user-callerid:31] Set(“DAHDI/3-1”, “CHANNEL(language)=en”) in new stack
– Executing [03@from-internal:2] Set(“DAHDI/3-1”, “ROUTEUSER=210”) in new stack
– Executing [03@from-internal:3] GotoIf(“DAHDI/3-1”, “1?outbound-2-3-4-7-8-15-16,03,2:outbound-allroutes,03,2”) in new stack
– Goto (outbound-2-3-4-7-8-15-16,03,2)
– Hanging up on ‘DAHDI/3-1’
– Hungup ‘DAHDI/3-1’