dhemmi
May 25, 2023, 7:03am
1
Howdy y’all,
First off, I wana say I am very new to commercial phones. I just recently bought a Cisco 9971 for grins. I had no clue what I was doing, just saw it was a cheap cisco phone and went with it. Now I am going through the fun of trying to get the sucker to work. I have been trying to follow the guide by David Chidell (I can’t post links) but I am getting stuck with using the internal TFTP feature.
I am using a VirtualBox VM to host the system and I am confused on how I can get into the file manager.
On a side note, I have attached an image of the files I am wanted to upload on the TFTP system. Are these the correct files to use? I also have an attached my config file.
Any help would be much appreciated.
p.s. I don’t know what forum section this would be apart of, so if anyone wants to point me to the right place that would be great.
dhemmi
May 25, 2023, 7:04am
2
<?xml version="1.0" encoding="UTF-8"?>
<device>
<advertiseG722Codec>1</advertiseG722Codec>
<deviceProtocol>SIP</deviceProtocol>
<sshUserId>1203</sshUserId>
<sshPassword>45f74553480f15aeaecaa48dfb8273e4</sshPassword>
<devicePool>
<dateTimeSetting>
<dateTemplate>M/D/YA</dateTemplate>
<timeZone>CST Central/Daylight Time</timeZone>
<ntps>
<ntp>
<name>pool.ntp.org</name>
<ntpMode>Unicast</ntpMode>
</ntp>
</ntps>
</dateTimeSetting>
<callManagerGroup>
<members>
<member priority="0">
<callManager>
<ports>
<ethernetPhonePort>2000</ethernetPhonePort>
<sipPort>5060</sipPort>
<securedSipPort>5061</securedSipPort>
</ports>
<processNodeName>192.168.0.107</processNodeName>
</callManager>
</member>
</members>
</callManagerGroup>
</devicePool>
<sipProfile>
<sipProxies>
<backupProxy />
<backupProxyPort>5060</backupProxyPort>
<emergencyProxy />
<emergencyProxyPort />
<outboundProxy />
<outboundProxyPort />
<registerWithProxy>true</registerWithProxy>
</sipProxies>
<sipCallFeatures>
<cnfJoinEnabled>true</cnfJoinEnabled>
<callForwardURI>x-serviceuri-cfwdall</callForwardURI>
<callPickupURI>x-cisco-serviceuri-pickup</callPickupURI>
<callPickupListURI>x-cisco-serviceuri-opickup</callPickupListURI>
<callPickupGroupURI>x-cisco-serviceuri-gpickup</callPickupGroupURI>
<meetMeServiceURI>x-cisco-serviceuri-meetme</meetMeServiceURI>
<abbreviatedDialURI>x-cisco-serviceuri-abbrdial</abbreviatedDialURI>
<rfc2543Hold>false</rfc2543Hold>
<callHoldRingback>2</callHoldRingback>
<URIDialingDisplayPreference>1</URIDialingDisplayPreference>
<localCfwdEnable>true</localCfwdEnable>
<semiAttendedTransfer>true</semiAttendedTransfer>
<anonymousCallBlock>0</anonymousCallBlock>
<callerIdBlocking>2</callerIdBlocking>
<dndControl>0</dndControl>
<remoteCcEnable>true</remoteCcEnable>
<retainForwardInformation>false</retainForwardInformation>
</sipCallFeatures>
<sipStack>
<sipInviteRetx>6</sipInviteRetx>
<sipRetx>10</sipRetx>
<timerInviteExpires>180</timerInviteExpires>
<timerRegisterExpires>3600</timerRegisterExpires>
<timerRegisterDelta>5</timerRegisterDelta>
<timerKeepAliveExpires>120</timerKeepAliveExpires>
<timerSubscribeExpires>120</timerSubscribeExpires>
<timerSubscribeDelta>5</timerSubscribeDelta>
<timerT1>500</timerT1>
<timerT2>4000</timerT2>
<maxRedirects>70</maxRedirects>
<remotePartyID>false</remotePartyID>
<userInfo>None</userInfo>
</sipStack>
<autoAnswerTimer>1</autoAnswerTimer>
<autoAnswerAltBehavior>false</autoAnswerAltBehavior>
<autoAnswerOverride>true</autoAnswerOverride>
<transferOnhookEnabled>false</transferOnhookEnabled>
<enableVad>false</enableVad>
<dtmfAvtPayload>101</dtmfAvtPayload>
<dtmfDbLevel>3</dtmfDbLevel>
<dtmfOutofBand>avt</dtmfOutofBand>
<alwaysUsePrimeLine>false</alwaysUsePrimeLine>
<alwaysUsePrimeLineVoiceMail>false</alwaysUsePrimeLineVoiceMail>
<kpml>3</kpml>
<phoneLabel>Hello World!</phoneLabel>
<stutterMsgWaiting>2</stutterMsgWaiting>
<callStats>false</callStats>
<silentPeriodBetweenCallWaitingBursts>10</silentPeriodBetweenCallWaitingBursts>
<disableLocalSpeedDialConfig>false</disableLocalSpeedDialConfig>
<sipLines>
</sipLines>
<voipControlPort>5060</voipControlPort>
<startMediaPort>16348</startMediaPort>
<stopMediaPort>20134</stopMediaPort>
<dscpForAudio>184</dscpForAudio>
<ringSettingBusyStationPolicy>0</ringSettingBusyStationPolicy>
<dialTemplate>dialplan.xml</dialTemplate>
<softKeyFile />
</sipProfile>
<commonProfile>
<phonePassword />
<backgroundImageAccess>true</backgroundImageAccess>
<callLogBlfEnabled>2</callLogBlfEnabled>
</commonProfile>
<loadInformation>sip9971.9-2-2SR1-9</loadInformation>
<inactiveLoadInformation>sip9971.9-2-2SR1-9</inactiveLoadInformation>
<vendorConfig>
<g722CodecSupport>1</g722CodecSupport>
<handsetWidebandEnable>1</handsetWidebandEnable>
<headsetWidebandUIControl>1</headsetWidebandUIControl>
<disableSpeaker>false</disableSpeaker>
<disableSpeakerAndHeadset>false</disableSpeakerAndHeadset>
<pcPort>1</pcPort>
<settingsAccess>1</settingsAccess>
<garp>1</garp>
<voiceVlanAccess>1</voiceVlanAccess>
<videoCapability>1</videoCapability>
<autoSelectLineEnable>0</autoSelectLineEnable>
<webAccess>0</webAccess>
<daysDisplayNotActive></daysDisplayNotActive>
<displayOnTime>08:00</displayOnTime>
<displayOnDuration>16:00</displayOnDuration>
<displayIdleTimeout>00:10</displayIdleTimeout>
<spanToPCPort>0</spanToPCPort>
<loggingDisplay>1</loggingDisplay>
<ciscoCamera>1</ciscoCamera>
<loadServer />
</vendorConfig>
<userLocale>
<name>English_United_Kingdom</name>
<uid />
<langCode>en</langCode>
<version>1.0.0.0-1</version>
<winCharSet>iso-8859-1</winCharSet>
</userLocale>
<networkLocale>United_Kingdom</networkLocale>
<networkLocaleInfo>
<name />
<uid />
<version>1.0.0.0-1</version>
</networkLocaleInfo>
<deviceSecurityMode>1</deviceSecurityMode>
<authenticationURL />
<directoryURL />
<servicesURL />
<idleURL />
<informationURL />
<messagesURL />
<proxyServerURL />
<dscpForSCCPPhoneConfig>96</dscpForSCCPPhoneConfig>
<dscpForSCCPPhoneServices>0</dscpForSCCPPhoneServices>
<dscpForCm2Dvce>96</dscpForCm2Dvce>
<transportLayerProtocol>1</transportLayerProtocol>
<capfAuthMode>0</capfAuthMode>
<capfList>
<capf>
<phonePort>3804</phonePort>
</capf>
</capfList>
<certHash />
<encrConfig>false</encrConfig>
</device>
