I’ve got a Cisco 7970G that I pulled from my old FPBX install. It has a good, known working version of SIP firmware. I’m moving it to my new PBX.
I have PJSIP configured (tried chan_SIP and couldn’t even get communication). I can see that the phone is getting some config info because if I change some of the settings in the (MACADDRESS).cnf.xml file, those changes show up on the phone screen (like the extension name). I think’s it’s a config file issue - I think.
FPBX shows me the following in the logs (192.168.1.43 is my pbx and 192.168.1.180 is the 7970):
220149 [2024-03-25 18:46:41] VERBOSE[2592] res_pjsip_logger.c: <— Received SIP request (867 bytes) from UDP:192.168.1.180:50045 —>
220150 Via: SIP/2.0/UDP 192.168.1.180:5060;branch=z9hG4bK598ca840
220151 Call-ID: [email protected]
220152 Contact: sip:[email protected]:5060;transport=udp;+sip.instance=“urn:uuid:00000000-0000-0000-0000-0024c4be21e6”;+u.sip!model.ccm.cisco.com=“30006”
220153 [2024-03-25 18:46:41] VERBOSE[2861] res_pjsip_logger.c: <— Transmitting SIP response (518 bytes) to UDP:192.168.1.180:50045 —>
220154 Via: SIP/2.0/UDP 192.168.1.180:5060;rport=50045;received=192.168.1.180;branch=z9hG4bK598ca840
220155 Call-ID: [email protected]
220156 [2024-03-25 18:46:43] VERBOSE[2592] res_pjsip_logger.c: <— Received SIP request (867 bytes) from UDP:192.168.1.180:50045 —>
220157 Via: SIP/2.0/UDP 192.168.1.180:5060;branch=z9hG4bK598ca840
220158 Call-ID: [email protected]
220159 Contact: sip:[email protected]:5060;transport=udp;+sip.instance=“urn:uuid:00000000-0000-0000-0000-0024c4be21e6”;+u.sip!model.ccm.cisco.com=“30006”
220160 [2024-03-25 18:46:43] VERBOSE[2861] res_pjsip_logger.c: <— Transmitting SIP response (518 bytes) to UDP:192.168.1.180:50045 —>
220161 Via: SIP/2.0/UDP 192.168.1.180:5060;rport=50045;received=192.168.1.180;branch=z9hG4bK598ca840
220162 Call-ID: [email protected]
Here is a link to my config file for the phone.