Incoming calls are working through chan dongle
The problem occurs when outgoing calls
internal phone calls through dongle0 - the mobile phone - inner and outer rings - answer-silence outside the outer-inner rings still -
or upon receipt of an outgoing connection nothing happens
serv*CLI> dongle show devices
ID Group State RSSI Mode Submode Provider Name Model Firmware IMEI IMSI Number
dongle0 0 Free 16 0 0 PLAY E3131 21.157.11.00.264 866715017349974 260060059162453 Unknown
PLEASE HELP !!
log
– Executing [509674420@from-internal:1] Macro(“SIP/100-0000000a”, “user-callerid,LIMIT,”) in new stack
– Executing [s@macro-user-callerid:1] Set(“SIP/100-0000000a”, “TOUCH_MONITOR=1376600086.23”) in new stack
– Executing [s@macro-user-callerid:2] Set(“SIP/100-0000000a”, “AMPUSER=100”) in new stack
– Executing [s@macro-user-callerid:3] GotoIf(“SIP/100-0000000a”, “0?report”) in new stack
– Executing [s@macro-user-callerid:4] ExecIf(“SIP/100-0000000a”, “1?Set(REALCALLERIDNUM=100)”) in new stack
– Executing [s@macro-user-callerid:5] Set(“SIP/100-0000000a”, “AMPUSER=100”) in new stack
– Executing [s@macro-user-callerid:6] Set(“SIP/100-0000000a”, “AMPUSERCIDNAME=sklep”) in new stack
– Executing [s@macro-user-callerid:7] GotoIf(“SIP/100-0000000a”, “0?report”) in new stack
– Executing [s@macro-user-callerid:8] Set(“SIP/100-0000000a”, “AMPUSERCID=100”) in new stack
– Executing [s@macro-user-callerid:9] Set(“SIP/100-0000000a”, “__DIAL_OPTIONS=Ttr”) in new stack
– Executing [s@macro-user-callerid:10] Set(“SIP/100-0000000a”, “CALLERID(all)=“sklep” <100>”) in new stack
– Executing [s@macro-user-callerid:11] GotoIf(“SIP/100-0000000a”, “0?limit”) in new stack
– Executing [s@macro-user-callerid:12] ExecIf(“SIP/100-0000000a”, “1?Set(GROUP(concurrency_limit)=100)”) in new stack
– Executing [s@macro-user-callerid:13] GosubIf(“SIP/100-0000000a”, “7?sub-ccss,s,1(from-internal,509674420)”) in new stack
– Executing [s@sub-ccss:1] ExecIf(“SIP/100-0000000a”, “0?Return()”) in new stack
– Executing [s@sub-ccss:2] Set(“SIP/100-0000000a”, “CCSS_SETUP=TRUE”) in new stack
– Executing [s@sub-ccss:3] GosubIf(“SIP/100-0000000a”, “0?monitor_config,1(from-internal,509674420):monitor_default,1(from-internal,509674420)”) in new stack
– Executing [monitor_default@sub-ccss:1] GotoIf(“SIP/100-0000000a”, “0?is_exten”) in new stack
– Executing [monitor_default@sub-ccss:2] StackPop(“SIP/100-0000000a”, “”) in new stack
– Executing [monitor_default@sub-ccss:3] Return(“SIP/100-0000000a”, “FALSE”) in new stack
– Executing [s@macro-user-callerid:14] GotoIf(“SIP/100-0000000a”, “1?continue”) in new stack
– Goto (macro-user-callerid,s,27)
– Executing [s@macro-user-callerid:27] Set(“SIP/100-0000000a”, “CALLERID(number)=100”) in new stack
– Executing [s@macro-user-callerid:28] Set(“SIP/100-0000000a”, “CALLERID(name)=sklep”) in new stack
– Executing [s@macro-user-callerid:29] Set(“SIP/100-0000000a”, “CDR(cnum)=100”) in new stack
– Executing [s@macro-user-callerid:30] Set(“SIP/100-0000000a”, “CDR(cnam)=sklep”) in new stack
– Executing [s@macro-user-callerid:31] Set(“SIP/100-0000000a”, “CHANNEL(language)=en”) in new stack
– Executing [509674420@from-internal:2] Set(“SIP/100-0000000a”, “MOHCLASS=default”) in new stack
– Executing [509674420@from-internal:3] Set(“SIP/100-0000000a”, “_NODEST=”) in new stack
– Executing [509674420@from-internal:4] Gosub(“SIP/100-0000000a”, “sub-record-check,s,1(out,509674420,)”) in new stack
– Executing [s@sub-record-check:1] Set(“SIP/100-0000000a”, “REC_POLICY_MODE_SAVE=”) in new stack
– Executing [s@sub-record-check:2] GotoIf(“SIP/100-0000000a”, “1?check”) in new stack
– Goto (sub-record-check,s,7)
– Executing [s@sub-record-check:7] Set(“SIP/100-0000000a”, “__MON_FMT=wav”) in new stack
– Executing [s@sub-record-check:8] GotoIf(“SIP/100-0000000a”, “1?next”) in new stack
– Goto (sub-record-check,s,11)
– Executing [s@sub-record-check:11] ExecIf(“SIP/100-0000000a”, “0?Return()”) in new stack
– Executing [s@sub-record-check:12] ExecIf(“SIP/100-0000000a”, “0?Set(__REC_POLICY_MODE=)”) in new stack
– Executing [s@sub-record-check:13] GotoIf(“SIP/100-0000000a”, “0?out,1”) in new stack
– Executing [s@sub-record-check:14] Set(“SIP/100-0000000a”, “__REC_STATUS=INITIALIZED”) in new stack
– Executing [s@sub-record-check:15] Set(“SIP/100-0000000a”, “NOW=1376600086”) in new stack
– Executing [s@sub-record-check:16] Set(“SIP/100-0000000a”, “__DAY=15”) in new stack
– Executing [s@sub-record-check:17] Set(“SIP/100-0000000a”, “__MONTH=08”) in new stack
– Executing [s@sub-record-check:18] Set(“SIP/100-0000000a”, “__YEAR=2013”) in new stack
– Executing [s@sub-record-check:19] Set(“SIP/100-0000000a”, “__TIMESTR=20130815-225446”) in new stack
– Executing [s@sub-record-check:20] Set(“SIP/100-0000000a”, “__FROMEXTEN=100”) in new stack
– Executing [s@sub-record-check:21] Set(“SIP/100-0000000a”, “__CALLFILENAME=out-509674420-100-20130815-225446-1376600086.23”) in new stack
– Executing [s@sub-record-check:22] Goto(“SIP/100-0000000a”, “out,1”) in new stack
– Goto (sub-record-check,out,1)
– Executing [out@sub-record-check:1] ExecIf(“SIP/100-0000000a”, “1?Set(__REC_POLICY_MODE=dontcare)”) in new stack
– Executing [out@sub-record-check:2] GosubIf(“SIP/100-0000000a”, “0?record,1(exten,509674420,100)”) in new stack
– Executing [out@sub-record-check:3] Return(“SIP/100-0000000a”, “”) in new stack
– Executing [509674420@from-internal:5] Macro(“SIP/100-0000000a”, “dialout-trunk,5,509674420,off”) in new stack
– Executing [s@macro-dialout-trunk:1] Set(“SIP/100-0000000a”, “DIAL_TRUNK=5”) in new stack
– Executing [s@macro-dialout-trunk:2] GosubIf(“SIP/100-0000000a”, “0?sub-pincheck,s,1()”) in new stack
– Executing [s@macro-dialout-trunk:3] GotoIf(“SIP/100-0000000a”, “0?disabletrunk,1”) in new stack
– Executing [s@macro-dialout-trunk:4] Set(“SIP/100-0000000a”, “DIAL_NUMBER=509674420”) in new stack
– Executing [s@macro-dialout-trunk:5] Set(“SIP/100-0000000a”, “DIAL_TRUNK_OPTIONS=Ttr”) in new stack
– Executing [s@macro-dialout-trunk:6] Set(“SIP/100-0000000a”, “OUTBOUND_GROUP=OUT_5”) in new stack
– Executing [s@macro-dialout-trunk:7] GotoIf(“SIP/100-0000000a”, “0?nomax”) in new stack
– Executing [s@macro-dialout-trunk:8] GotoIf(“SIP/100-0000000a”, “0?chanfull”) in new stack
– Executing [s@macro-dialout-trunk:9] GotoIf(“SIP/100-0000000a”, “0?skipoutcid”) in new stack
– Executing [s@macro-dialout-trunk:10] Set(“SIP/100-0000000a”, “DIAL_TRUNK_OPTIONS=Tt”) in new stack
– Executing [s@macro-dialout-trunk:11] Macro(“SIP/100-0000000a”, “outbound-callerid,5”) in new stack
– Executing [s@macro-outbound-callerid:1] ExecIf(“SIP/100-0000000a”, “0?Set(CALLERPRES()=)”) in new stack
– Executing [s@macro-outbound-callerid:2] ExecIf(“SIP/100-0000000a”, “0?Set(REALCALLERIDNUM=100)”) in new stack
– Executing [s@macro-outbound-callerid:3] GotoIf(“SIP/100-0000000a”, “1?normcid”) in new stack
– Goto (macro-outbound-callerid,s,6)
– Executing [s@macro-outbound-callerid:6] Set(“SIP/100-0000000a”, “USEROUTCID=”) in new stack
– Executing [s@macro-outbound-callerid:7] Set(“SIP/100-0000000a”, “EMERGENCYCID=”) in new stack
– Executing [s@macro-outbound-callerid:8] Set(“SIP/100-0000000a”, “TRUNKOUTCID=730968626”) in new stack
– Executing [s@macro-outbound-callerid:9] GotoIf(“SIP/100-0000000a”, “1?trunkcid”) in new stack
– Goto (macro-outbound-callerid,s,14)
– Executing [s@macro-outbound-callerid:14] ExecIf(“SIP/100-0000000a”, “1?Set(CALLERID(all)=730968626)”) in new stack
– Executing [s@macro-outbound-callerid:15] ExecIf(“SIP/100-0000000a”, “0?Set(CALLERID(all)=)”) in new stack
– Executing [s@macro-outbound-callerid:16] ExecIf(“SIP/100-0000000a”, “0?Set(CALLERID(all)=)”) in new stack
– Executing [s@macro-outbound-callerid:17] ExecIf(“SIP/100-0000000a”, “0?Set(CALLERPRES()=prohib_passed_screen)”) in new stack
– Executing [s@macro-outbound-callerid:18] Set(“SIP/100-0000000a”, “CDR(outbound_cnum)=730968626”) in new stack
– Executing [s@macro-outbound-callerid:19] Set(“SIP/100-0000000a”, “CDR(outbound_cnam)=”) in new stack
– Executing [s@macro-dialout-trunk:12] GosubIf(“SIP/100-0000000a”, “1?sub-flp-5,s,1()”) in new stack
– Executing [s@sub-flp-5:1] ExecIf(“SIP/100-0000000a”, “1?Return()”) in new stack
– Executing [s@macro-dialout-trunk:13] Set(“SIP/100-0000000a”, “OUTNUM=509674420”) in new stack
– Executing [s@macro-dialout-trunk:14] Set(“SIP/100-0000000a”, “custom=AMP”) in new stack
– Executing [s@macro-dialout-trunk:15] ExecIf(“SIP/100-0000000a”, “0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default)Tt)”) in new stack
– Executing [s@macro-dialout-trunk:16] ExecIf(“SIP/100-0000000a”, “0?Set(DIAL_TRUNK_OPTIONS=TtM(confirm))”) in new stack
– Executing [s@macro-dialout-trunk:17] Macro(“SIP/100-0000000a”, “dialout-trunk-predial-hook,”) in new stack
– Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit(“SIP/100-0000000a”, “”) in new stack
– Executing [s@macro-dialout-trunk:18] GotoIf(“SIP/100-0000000a”, “0?bypass,1”) in new stack
– Executing [s@macro-dialout-trunk:19] ExecIf(“SIP/100-0000000a”, “1?Set(CONNECTEDLINE(num,i)=509674420)”) in new stack
– Executing [s@macro-dialout-trunk:20] ExecIf(“SIP/100-0000000a”, “1?Set(CONNECTEDLINE(name,i)=CID:730968626)”) in new stack
– Executing [s@macro-dialout-trunk:21] GotoIf(“SIP/100-0000000a”, “1?customtrunk”) in new stack
– Goto (macro-dialout-trunk,s,25)
– Executing [s@macro-dialout-trunk:25] Set(“SIP/100-0000000a”, “pre_num=AMP:dongle/dongle0/”) in new stack
– Executing [s@macro-dialout-trunk:26] Set(“SIP/100-0000000a”, “the_num=OUTNUM”) in new stack
– Executing [s@macro-dialout-trunk:27] Set(“SIP/100-0000000a”, “post_num=”) in new stack
– Executing [s@macro-dialout-trunk:28] GotoIf(“SIP/100-0000000a”, “1?outnum:skipoutnum”) in new stack
– Goto (macro-dialout-trunk,s,29)
– Executing [s@macro-dialout-trunk:29] Set(“SIP/100-0000000a”, “the_num=509674420”) in new stack
– Executing [s@macro-dialout-trunk:30] Dial(“SIP/100-0000000a”, “dongle/dongle0/509674420,300,Tt”) in new stack
– Called dongle/dongle0/509674420
– Dongle/dongle0-010000000d is making progress passing it to SIP/100-0000000a