CDR Reports - One call, two entries

I don’t have a great deal of resources, but if anyone can help me get my system up to a production level, I can pay a few hundred dollars - (a few…)

When using google voice or a similar service provider, it seems that there must be two cdr posts per call, because one call is to the outbound destination, one call is made to the google voice account, and then the two calls are “bridged.” Am I right on this???
Can anyone take a quick look at my status and tell me if something looks wrong?

I’m using FreePBX v2.9.0beta2.3
PIAF Purple
Asterisk 1.8.3
I am trying out softphones, still trying to find a good one to use- I currently use 3CX or Bria.

From the Asterisk CLI:
Command: 'cdr show status’
Call Detail Record (CDR) settings

Logging: Enabled
Mode: Simple
Log unanswered calls: No

  • Registered Backends

    mysql
    cdr_manager
    cdr-custom
    csv
    Adaptive ODBC
    Command: 'show mysyql status’
    Connected to asteriskcdrdb on socket file default using table cdr for 2 days, 1 hours, 18 minutes, 4 seconds.
    Wrote 51 records since last restart.

My question is this: When I check the Asterisk log in the FreePBX GUI (Last 500 lines default) All of the log files are posted twice - I realize this isn’t exactly the same as two cdr posts, but is it related? The ‘shortened’ info below is just from one 29 seconds outbound-call to my cell. It seems like a ton of work for a 30 second call… not only that, but is it bad to see ZOMBIE in an Asterisk log file? My guess is that it is…

I apologize for the long log file!!! I tried to keep it as short as possible - again, this is just for one outbound-call that lasted 29 seconds:

[2011-03-17 17:54:13] VERBOSE[24868] netsock2.c: == Using SIP RTP TOS bits 184
[2011-03-17 17:54:13] VERBOSE[24868] netsock2.c: == Using SIP RTP TOS bits 184
[2011-03-17 17:54:13] VERBOSE[24868] netsock2.c: == Using SIP RTP CoS mark 5
[2011-03-17 17:54:13] VERBOSE[24868] netsock2.c: == Using SIP RTP CoS mark 5
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [6557668777@from-internal:1] Macro(“SIP/701-0000002c”, “user-callerid,LIMIT,”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [6557668777@from-internal:1] Macro(“SIP/701-0000002c”, “user-callerid,LIMIT,”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-user-callerid:1] Set(“SIP/701-0000002c”, “AMPUSER=701”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-user-callerid:1] Set(“SIP/701-0000002c”, “AMPUSER=701”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-user-callerid:2] GotoIf(“SIP/701-0000002c”, “0?report”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-user-callerid:2] GotoIf(“SIP/701-0000002c”, “0?report”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-user-callerid:3] ExecIf(“SIP/701-0000002c”, “1?Set(REALCALLERIDNUM=701)”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-user-callerid:3] ExecIf(“SIP/701-0000002c”, “1?Set(REALCALLERIDNUM=701)”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-user-callerid:4] Set(“SIP/701-0000002c”, “AMPUSER=701”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-user-callerid:4] Set(“SIP/701-0000002c”, “AMPUSER=701”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-user-callerid:5] Set(“SIP/701-0000002c”, “AMPUSERCIDNAME=701”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-user-callerid:5] Set(“SIP/701-0000002c”, “AMPUSERCIDNAME=701”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-user-callerid:6] GotoIf(“SIP/701-0000002c”, “0?report”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-user-callerid:6] GotoIf(“SIP/701-0000002c”, “0?report”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-user-callerid:7] Set(“SIP/701-0000002c”, “AMPUSERCID=701”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-user-callerid:7] Set(“SIP/701-0000002c”, “AMPUSERCID=701”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-user-callerid:8] Set(“SIP/701-0000002c”, “CALLERID(all)=“701” <701>”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-user-callerid:8] Set(“SIP/701-0000002c”, “CALLERID(all)=“701” <701>”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-user-callerid:9] GotoIf(“SIP/701-0000002c”, “0?limit”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-user-callerid:9] GotoIf(“SIP/701-0000002c”, “0?limit”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-user-callerid:10] ExecIf(“SIP/701-0000002c”, “1?Set(GROUP(concurrency_limit)=701)”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-user-callerid:10] ExecIf(“SIP/701-0000002c”, “1?Set(GROUP(concurrency_limit)=701)”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-user-callerid:11] ExecIf(“SIP/701-0000002c”, “0?Set(CHANNEL(language)=)”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-user-callerid:11] ExecIf(“SIP/701-0000002c”, “0?Set(CHANNEL(language)=)”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-user-callerid:12] GotoIf(“SIP/701-0000002c”, “1?continue”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-user-callerid:12] GotoIf(“SIP/701-0000002c”, “1?continue”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Goto (macro-user-callerid,s,25)
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Goto (macro-user-callerid,s,25)
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-user-callerid:25] Set(“SIP/701-0000002c”, “CALLERID(number)=701”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-user-callerid:25] Set(“SIP/701-0000002c”, “CALLERID(number)=701”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-user-callerid:26] Set(“SIP/701-0000002c”, “CALLERID(name)=701”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-user-callerid:26] Set(“SIP/701-0000002c”, “CALLERID(name)=701”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-user-callerid:27] Set(“SIP/701-0000002c”, “CHANNEL(language)=en”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-user-callerid:27] Set(“SIP/701-0000002c”, “CHANNEL(language)=en”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [6557668777@from-internal:2] Set(“SIP/701-0000002c”, “MOHCLASS=default”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [6557668777@from-internal:2] Set(“SIP/701-0000002c”, “MOHCLASS=default”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [6557668777@from-internal:3] Set(“SIP/701-0000002c”, “_NODEST=”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [6557668777@from-internal:3] Set(“SIP/701-0000002c”, “_NODEST=”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [6557668777@from-internal:4] Macro(“SIP/701-0000002c”, “record-enable,701,OUT,”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [6557668777@from-internal:4] Macro(“SIP/701-0000002c”, “record-enable,701,OUT,”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-record-enable:1] GotoIf(“SIP/701-0000002c”, “1?check”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-record-enable:1] GotoIf(“SIP/701-0000002c”, “1?check”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Goto (macro-record-enable,s,4)
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Goto (macro-record-enable,s,4)
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-record-enable:4] ExecIf(“SIP/701-0000002c”, “0?MacroExit()”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-record-enable:4] ExecIf(“SIP/701-0000002c”, “0?MacroExit()”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-record-enable:5] GotoIf(“SIP/701-0000002c”, “0?Group:OUT”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-record-enable:5] GotoIf(“SIP/701-0000002c”, “0?Group:OUT”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Goto (macro-record-enable,s,14)
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Goto (macro-record-enable,s,14)
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-record-enable:14] GotoIf(“SIP/701-0000002c”, “0?IN”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-record-enable:14] GotoIf(“SIP/701-0000002c”, “0?IN”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-record-enable:15] ExecIf(“SIP/701-0000002c”, “0?MacroExit()”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-record-enable:15] ExecIf(“SIP/701-0000002c”, “0?MacroExit()”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-record-enable:16] Set(“SIP/701-0000002c”, “CALLFILENAME=OUT701-20110317-175413-1300409653.107”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-record-enable:16] Set(“SIP/701-0000002c”, “CALLFILENAME=OUT701-20110317-175413-1300409653.107”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-record-enable:17] Goto(“SIP/701-0000002c”, “record”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-record-enable:17] Goto(“SIP/701-0000002c”, “record”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Goto (macro-record-enable,s,20)
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Goto (macro-record-enable,s,20)
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-record-enable:20] MixMonitor(“SIP/701-0000002c”, “OUT701-20110317-175413-1300409653.107.wav,”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-record-enable:20] MixMonitor(“SIP/701-0000002c”, “OUT701-20110317-175413-1300409653.107.wav,”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-record-enable:21] MacroExit(“SIP/701-0000002c”, “”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-record-enable:21] MacroExit(“SIP/701-0000002c”, “”) in new stack
[2011-03-17 17:54:13] VERBOSE[4614] app_mixmonitor.c: == Begin MixMonitor Recording SIP/701-0000002c
[2011-03-17 17:54:13] VERBOSE[4614] app_mixmonitor.c: == Begin MixMonitor Recording SIP/701-0000002c
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [6557668777@from-internal:5] Macro(“SIP/701-0000002c”, “dialout-trunk,2,6557668777,”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [6557668777@from-internal:5] Macro(“SIP/701-0000002c”, “dialout-trunk,2,6557668777,”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:1] Set(“SIP/701-0000002c”, “DIAL_TRUNK=2”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:1] Set(“SIP/701-0000002c”, “DIAL_TRUNK=2”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:2] GosubIf(“SIP/701-0000002c”, “0?sub-pincheck,s,1”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:2] GosubIf(“SIP/701-0000002c”, “0?sub-pincheck,s,1”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:3] GotoIf(“SIP/701-0000002c”, “0?disabletrunk,1”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:3] GotoIf(“SIP/701-0000002c”, “0?disabletrunk,1”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:4] Set(“SIP/701-0000002c”, “DIAL_NUMBER=6557668777”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:4] Set(“SIP/701-0000002c”, “DIAL_NUMBER=6557668777”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:5] Set(“SIP/701-0000002c”, “DIAL_TRUNK_OPTIONS=tTr”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:5] Set(“SIP/701-0000002c”, “DIAL_TRUNK_OPTIONS=tTr”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:6] Set(“SIP/701-0000002c”, “OUTBOUND_GROUP=OUT_2”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:6] Set(“SIP/701-0000002c”, “OUTBOUND_GROUP=OUT_2”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:7] GotoIf(“SIP/701-0000002c”, “1?nomax”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:7] GotoIf(“SIP/701-0000002c”, “1?nomax”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Goto (macro-dialout-trunk,s,9)
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Goto (macro-dialout-trunk,s,9)
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:9] GotoIf(“SIP/701-0000002c”, “0?skipoutcid”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:9] GotoIf(“SIP/701-0000002c”, “0?skipoutcid”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:10] Set(“SIP/701-0000002c”, “DIAL_TRUNK_OPTIONS=tT”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:10] Set(“SIP/701-0000002c”, “DIAL_TRUNK_OPTIONS=tT”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:11] Macro(“SIP/701-0000002c”, “outbound-callerid,2”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:11] Macro(“SIP/701-0000002c”, “outbound-callerid,2”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-outbound-callerid:1] ExecIf(“SIP/701-0000002c”, “0?Set(CALLERPRES()=)”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-outbound-callerid:1] ExecIf(“SIP/701-0000002c”, “0?Set(CALLERPRES()=)”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-outbound-callerid:2] ExecIf(“SIP/701-0000002c”, “0?Set(REALCALLERIDNUM=701)”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-outbound-callerid:2] ExecIf(“SIP/701-0000002c”, “0?Set(REALCALLERIDNUM=701)”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-outbound-callerid:3] GotoIf(“SIP/701-0000002c”, “1?normcid”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-outbound-callerid:3] GotoIf(“SIP/701-0000002c”, “1?normcid”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Goto (macro-outbound-callerid,s,6)
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Goto (macro-outbound-callerid,s,6)
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-outbound-callerid:6] Set(“SIP/701-0000002c”, “USEROUTCID=”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-outbound-callerid:6] Set(“SIP/701-0000002c”, “USEROUTCID=”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-outbound-callerid:7] Set(“SIP/701-0000002c”, “EMERGENCYCID=”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-outbound-callerid:7] Set(“SIP/701-0000002c”, “EMERGENCYCID=”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-outbound-callerid:8] Set(“SIP/701-0000002c”, “TRUNKOUTCID=”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-outbound-callerid:8] Set(“SIP/701-0000002c”, “TRUNKOUTCID=”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-outbound-callerid:9] GotoIf(“SIP/701-0000002c”, “1?trunkcid”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-outbound-callerid:9] GotoIf(“SIP/701-0000002c”, “1?trunkcid”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Goto (macro-outbound-callerid,s,12)
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Goto (macro-outbound-callerid,s,12)
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-outbound-callerid:12] ExecIf(“SIP/701-0000002c”, “0?Set(CALLERID(all)=)”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-outbound-callerid:12] ExecIf(“SIP/701-0000002c”, “0?Set(CALLERID(all)=)”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-outbound-callerid:13] ExecIf(“SIP/701-0000002c”, “0?Set(CALLERID(all)=)”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-outbound-callerid:13] ExecIf(“SIP/701-0000002c”, “0?Set(CALLERID(all)=)”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-outbound-callerid:14] ExecIf(“SIP/701-0000002c”, “0?Set(CALLERID(all)=)”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-outbound-callerid:14] ExecIf(“SIP/701-0000002c”, “0?Set(CALLERID(all)=)”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-outbound-callerid:15] ExecIf(“SIP/701-0000002c”, “0?Set(CALLERPRES()=prohib_passed_screen)”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-outbound-callerid:15] ExecIf(“SIP/701-0000002c”, “0?Set(CALLERPRES()=prohib_passed_screen)”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:12] GosubIf(“SIP/701-0000002c”, “0?sub-flp-2,s,1”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:12] GosubIf(“SIP/701-0000002c”, “0?sub-flp-2,s,1”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:13] Set(“SIP/701-0000002c”, “OUTNUM=6557668777”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:13] Set(“SIP/701-0000002c”, “OUTNUM=6557668777”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:14] Set(“SIP/701-0000002c”, “custom=AMP”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:14] Set(“SIP/701-0000002c”, “custom=AMP”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:15] ExecIf(“SIP/701-0000002c”, “0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default)tT)”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:15] ExecIf(“SIP/701-0000002c”, “0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default)tT)”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:16] ExecIf(“SIP/701-0000002c”, “0?Set(DIAL_TRUNK_OPTIONS=M(confirm)tT)”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:16] ExecIf(“SIP/701-0000002c”, “0?Set(DIAL_TRUNK_OPTIONS=M(confirm)tT)”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:17] Macro(“SIP/701-0000002c”, “dialout-trunk-predial-hook,”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:17] Macro(“SIP/701-0000002c”, “dialout-trunk-predial-hook,”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit(“SIP/701-0000002c”, “”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit(“SIP/701-0000002c”, “”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:18] GotoIf(“SIP/701-0000002c”, “0?bypass,1”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:18] GotoIf(“SIP/701-0000002c”, “0?bypass,1”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:19] GotoIf(“SIP/701-0000002c”, “1?customtrunk”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:19] GotoIf(“SIP/701-0000002c”, “1?customtrunk”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Goto (macro-dialout-trunk,s,23)
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Goto (macro-dialout-trunk,s,23)
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:23] Set(“SIP/701-0000002c”, “pre_num=AMP:local/”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:23] Set(“SIP/701-0000002c”, “pre_num=AMP:local/”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:24] Set(“SIP/701-0000002c”, “the_num=OUTNUM”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:24] Set(“SIP/701-0000002c”, “the_num=OUTNUM”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:25] Set(“SIP/701-0000002c”, “post_num=@gvoice-example001”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:25] Set(“SIP/701-0000002c”, “post_num=@gvoice-example001”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:26] GotoIf(“SIP/701-0000002c”, “1?outnum:skipoutnum”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:26] GotoIf(“SIP/701-0000002c”, “1?outnum:skipoutnum”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Goto (macro-dialout-trunk,s,27)
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Goto (macro-dialout-trunk,s,27)
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:27] Set(“SIP/701-0000002c”, “the_num=6557668777”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:27] Set(“SIP/701-0000002c”, “the_num=6557668777”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:28] Dial(“SIP/701-0000002c”, “local/6557668777@gvoice-example001,300,tT”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] pbx.c: – Executing [s@macro-dialout-trunk:28] Dial(“SIP/701-0000002c”, “local/6557668777@gvoice-example001,300,tT”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] app_dial.c: – Called 6557668777@gvoice-example001
[2011-03-17 17:54:13] VERBOSE[4613] app_dial.c: – Called 6557668777@gvoice-example001
[2011-03-17 17:54:13] VERBOSE[4615] pbx.c: – Executing [6557668777@gvoice-example001:1] System(“Local/6557668777@gvoice-example001-78ce;2”, “sudo /usr/bin/gvoice -e [email protected] -p pwordexample call 6557668777 [email protected] 9 &”) in new stack
[2011-03-17 17:54:13] VERBOSE[4615] pbx.c: – Executing [6557668777@gvoice-example001:1] System(“Local/6557668777@gvoice-example001-78ce;2”, “sudo /usr/bin/gvoice -e [email protected] -p pwordexample call 6557668777 [email protected] 9 &”) in new stack
[2011-03-17 17:54:13] VERBOSE[4615] pbx.c: – Executing [6557668777@gvoice-example001:2] BackGround(“Local/6557668777@gvoice-example001-78ce;2”, “pls-wait-connect-call”) in new stack
[2011-03-17 17:54:13] VERBOSE[4615] pbx.c: – Executing [6557668777@gvoice-example001:2] BackGround(“Local/6557668777@gvoice-example001-78ce;2”, “pls-wait-connect-call”) in new stack
[2011-03-17 17:54:13] VERBOSE[4613] app_dial.c: – Local/6557668777@gvoice-example001-78ce;1 answered SIP/701-0000002c
[2011-03-17 17:54:13] VERBOSE[4613] app_dial.c: – Local/6557668777@gvoice-example001-78ce;1 answered SIP/701-0000002c
[2011-03-17 17:54:13] VERBOSE[4615] file.c: – <Local/6557668777@gvoice-example001-78ce;2> Playing ‘pls-wait-connect-call.gsm’ (language ‘en’)
[2011-03-17 17:54:13] VERBOSE[4615] file.c: – <Local/6557668777@gvoice-example001-78ce;2> Playing ‘pls-wait-connect-call.gsm’ (language ‘en’)
[2011-03-17 17:54:15] VERBOSE[4615] pbx.c: – Executing [6557668777@gvoice-example001:3] Set(“Local/6557668777@gvoice-example001-78ce;2”, “DB(gv_dialout_example001/channel)=Local/6557668777@gvoice-example001-78ce;2”) in new stack
[2011-03-17 17:54:15] VERBOSE[4615] pbx.c: – Executing [6557668777@gvoice-example001:3] Set(“Local/6557668777@gvoice-example001-78ce;2”, “DB(gv_dialout_example001/channel)=Local/6557668777@gvoice-example001-78ce;2”) in new stack
[2011-03-17 17:54:15] VERBOSE[4615] pbx.c: – Executing [6557668777@gvoice-example001:4] Wait(“Local/6557668777@gvoice-example001-78ce;2”, “30”) in new stack
[2011-03-17 17:54:15] VERBOSE[4615] pbx.c: – Executing [6557668777@gvoice-example001:4] Wait(“Local/6557668777@gvoice-example001-78ce;2”, “30”) in new stack
[2011-03-17 17:54:18] VERBOSE[4631] pbx.c: – Executing [[email protected]@googlein:1] Wait(“Gtalk/+12234451212-2360”, “1”) in new stack
[2011-03-17 17:54:18] VERBOSE[4631] pbx.c: – Executing [[email protected]@googlein:1] Wait(“Gtalk/+12234451212-2360”, “1”) in new stack
[2011-03-17 17:54:19] VERBOSE[4631] pbx.c: – Executing [[email protected]@googlein:2] Set(“Gtalk/+12234451212-2360”, "[email protected]") in new stack
[2011-03-17 17:54:19] VERBOSE[4631] pbx.c: – Executing [[email protected]@googlein:2] Set(“Gtalk/+12234451212-2360”, "[email protected]") in new stack
[2011-03-17 17:54:19] VERBOSE[4631] pbx.c: – Executing [[email protected]@googlein:3] JabberSend(“Gtalk/+12234451212-2360”, "asterisk,[email protected],Incoming Google Voice Call: 2234451212") in new stack
[2011-03-17 17:54:19] VERBOSE[4631] pbx.c: – Executing [[email protected]@googlein:3] JabberSend(“Gtalk/+12234451212-2360”, "asterisk,[email protected],Incoming Google Voice Call: 2234451212") in new stack
[2011-03-17 17:54:19] VERBOSE[4631] pbx.c: – Executing [[email protected]@googlein:4] Set(“Gtalk/+12234451212-2360”, “CALLERID(number)=2234451212”) in new stack
[2011-03-17 17:54:19] VERBOSE[4631] pbx.c: – Executing [[email protected]@googlein:4] Set(“Gtalk/+12234451212-2360”, “CALLERID(number)=2234451212”) in new stack
[2011-03-17 17:54:19] VERBOSE[4631] pbx.c: – Executing [[email protected]@googlein:5] Set(“Gtalk/+12234451212-2360”, “CALLERID(name)=2234451212”) in new stack
[2011-03-17 17:54:19] VERBOSE[4631] pbx.c: – Executing [[email protected]@googlein:5] Set(“Gtalk/+12234451212-2360”, “CALLERID(name)=2234451212”) in new stack
[2011-03-17 17:54:19] VERBOSE[4631] pbx.c: – Executing [[email protected]@googlein:6] GotoIf(“Gtalk/+12234451212-2360”, “1?bridged”) in new stack
[2011-03-17 17:54:19] VERBOSE[4631] pbx.c: – Executing [[email protected]@googlein:6] GotoIf(“Gtalk/+12234451212-2360”, “1?bridged”) in new stack
[2011-03-17 17:54:19] VERBOSE[4631] pbx.c: – Goto (googlein,[email protected],8)
[2011-03-17 17:54:19] VERBOSE[4631] pbx.c: – Goto (googlein,[email protected],8)
[2011-03-17 17:54:19] VERBOSE[4631] pbx.c: – Executing [[email protected]@googlein:8] Bridge(“Gtalk/+12234451212-2360”, “Local/6557668777@gvoice-example001-78ce;2, p”) in new stack
[2011-03-17 17:54:19] VERBOSE[4631] pbx.c: – Executing [[email protected]@googlein:8] Bridge(“Gtalk/+12234451212-2360”, “Local/6557668777@gvoice-example001-78ce;2, p”) in new stack
[2011-03-17 17:54:19] VERBOSE[4615] pbx.c: == Spawn extension (gvoice-example001, 6557668777, 4) exited non-zero on ‘Bridge/Local/6557668777@gvoice-example001-78ce;2’
[2011-03-17 17:54:19] VERBOSE[4615] pbx.c: == Spawn extension (gvoice-example001, 6557668777, 4) exited non-zero on ‘Bridge/Local/6557668777@gvoice-example001-78ce;2’
[2011-03-17 17:54:19] VERBOSE[4615] pbx.c: – Executing [h@gvoice-example001:1] GotoIf(“Bridge/Local/6557668777@gvoice-example001-78ce;2”, “0?:bridged”) in new stack
[2011-03-17 17:54:19] VERBOSE[4615] pbx.c: – Executing [h@gvoice-example001:1] GotoIf(“Bridge/Local/6557668777@gvoice-example001-78ce;2”, “0?:bridged”) in new stack
[2011-03-17 17:54:19] VERBOSE[4615] pbx.c: – Goto (gvoice-example001,h,5)
[2011-03-17 17:54:19] VERBOSE[4615] pbx.c: – Goto (gvoice-example001,h,5)
[2011-03-17 17:54:19] VERBOSE[4615] pbx.c: – Executing [h@gvoice-example001:5] NoOp(“Bridge/Local/6557668777@gvoice-example001-78ce;2”, “The channel has been bridged successfully”) in new stack
[2011-03-17 17:54:19] VERBOSE[4615] pbx.c: – Executing [h@gvoice-example001:5] NoOp(“Bridge/Local/6557668777@gvoice-example001-78ce;2”, “The channel has been bridged successfully”) in new stack
[2011-03-17 17:54:19] VERBOSE[4631] file.c: – <Local/6557668777@gvoice-example001-78ce;2> Playing ‘beep.gsm’ (language ‘en’)
[2011-03-17 17:54:19] VERBOSE[4631] file.c: – <Local/6557668777@gvoice-example001-78ce;2> Playing ‘beep.gsm’ (language ‘en’)
[2011-03-17 17:54:52] VERBOSE[4613] pbx.c: – Executing [h@macro-dialout-trunk:1] Macro(“SIP/701-0000002c”, “hangupcall,”) in new stack
[2011-03-17 17:54:52] VERBOSE[4613] pbx.c: – Executing [h@macro-dialout-trunk:1] Macro(“SIP/701-0000002c”, “hangupcall,”) in new stack
[2011-03-17 17:54:52] VERBOSE[4613] pbx.c: – Executing [s@macro-hangupcall:1] GotoIf(“SIP/701-0000002c”, “1?theend”) in new stack
[2011-03-17 17:54:52] VERBOSE[4613] pbx.c: – Executing [s@macro-hangupcall:1] GotoIf(“SIP/701-0000002c”, “1?theend”) in new stack
[2011-03-17 17:54:52] VERBOSE[4613] pbx.c: – Goto (macro-hangupcall,s,3)
[2011-03-17 17:54:52] VERBOSE[4613] pbx.c: – Goto (macro-hangupcall,s,3)
[2011-03-17 17:54:52] VERBOSE[4613] pbx.c: – Executing [s@macro-hangupcall:3] Hangup(“SIP/701-0000002c”, “”) in new stack
[2011-03-17 17:54:52] VERBOSE[4613] pbx.c: – Executing [s@macro-hangupcall:3] Hangup(“SIP/701-0000002c”, “”) in new stack
[2011-03-17 17:54:52] VERBOSE[4613] app_macro.c: == Spawn extension (macro-hangupcall, s, 3) exited non-zero on ‘SIP/701-0000002c’ in macro ‘hangupcall’
[2011-03-17 17:54:52] VERBOSE[4613] app_macro.c: == Spawn extension (macro-hangupcall, s, 3) exited non-zero on ‘SIP/701-0000002c’ in macro ‘hangupcall’
[2011-03-17 17:54:52] VERBOSE[4613] app_macro.c: == Spawn extension (macro-dialout-trunk, s, 28) exited non-zero on ‘SIP/701-0000002c’ in macro ‘dialout-trunk’
[2011-03-17 17:54:52] VERBOSE[4613] app_macro.c: == Spawn extension (macro-dialout-trunk, s, 28) exited non-zero on ‘SIP/701-0000002c’ in macro ‘dialout-trunk’
[2011-03-17 17:54:52] VERBOSE[4613] pbx.c: == Spawn extension (from-internal, 6557668777, 5) exited non-zero on ‘SIP/701-0000002c’
[2011-03-17 17:54:52] VERBOSE[4613] pbx.c: == Spawn extension (from-internal, 6557668777, 5) exited non-zero on ‘SIP/701-0000002c’
[2011-03-17 17:54:52] VERBOSE[4614] app_mixmonitor.c: == MixMonitor close filestream
[2011-03-17 17:54:52] VERBOSE[4614] app_mixmonitor.c: == MixMonitor close filestream
[2011-03-17 17:54:52] VERBOSE[4614] app_mixmonitor.c: == End MixMonitor Recording SIP/701-0000002c
[2011-03-17 17:54:52] VERBOSE[4614] app_mixmonitor.c: == End MixMonitor Recording SIP/701-0000002c
[2011-03-17 17:55:01] VERBOSE[4666] manager.c: == Manager ‘admin’ logged on from 127.0.0.1

Thanks for any feedback.
~Ethan~