Can't get more than 1 day/night control to work

General Help
1

frepbx 2.4.1.0 on Elastix Distro

setup day ivr and closed ivr from 8am to 5pm
all inbound routes use the time condition for the 8-5 hours of operation.

created *280 to play a different ivr during the day if activated when needed.
This works fine.

created *281 with another ivr during the day if activated when needed.
This does not work. (different from *280)

So when I activate *281 the text turns RED on the web page indicating that it is on but then it plays my original day IVR instead of the ivr I have instructed it do play under the *281 settings.

So I can only get *280 to work.

IF YOUR USING A TIME CONDITION CAN YOU ONLY USE 1 DAY/NIGHT CONTROL?

2

Yes day/night is a simple one or the other. NOT a if … then… else… else… else… thing…

Please take a look at the following:
http://freepbx.org/news/2007-07-05/using-the-day-night-control-with-a-time-condition

It has also been discussed here with a different way to do it.
http://freepbx.org/forum/freepbx/users/how-to-use-multiple-day-night-toggles-with-a-time-condition

3

That should work if they are on different inbound routes. If not, you will need to daisy chain them.

*280/day points to IVR-1, *280/night points to *281
*281/day points to IVR-2 and *281/night points to IVR-3