Calls from a certain phone number get "Your call can not be completed as dialed"

General Help
1

Calls from 1 FreePBX box to another are not going through. On the destination FreePBX machine I get this in the CLI

== Using SIP RTP CoS mark 5
– Executing [6084939470@from-pstn:1] Set(“SIP/merrMain-00001c5d”, “__FROM_DID=6084939470”) in new stack
– Executing [6084939470@from-pstn:2] NoOp(“SIP/merrMain-00001c5d”, “Received an unknown call with DID set to 6084939470”) in new stack
– Executing [6084939470@from-pstn:3] Goto(“SIP/merrMain-00001c5d”, “s,a2”) in new stack
– Goto (from-pstn,s,2)
– Executing [s@from-pstn:2] Answer(“SIP/merrMain-00001c5d”, “”) in new stack
– Executing [s@from-pstn:3] Wait(“SIP/merrMain-00001c5d”, “2”) in new stack
– Executing [s@from-pstn:4] Playback(“SIP/merrMain-00001c5d”, “ss-noservice”) in new stack
– <SIP/merrMain-00001c5d> Playing ‘ss-noservice.ulaw’ (language ‘en’)
– Executing [s@from-pstn:5] SayAlpha(“SIP/merrMain-00001c5d”, “6084939470”) in new stack
– <SIP/merrMain-00001c5d> Playing ‘digits/6.ulaw’ (language ‘en’)
– <SIP/merrMain-00001c5d> Playing ‘digits/0.ulaw’ (language ‘en’)
– <SIP/merrMain-00001c5d> Playing ‘digits/8.ulaw’ (language ‘en’)
– <SIP/merrMain-00001c5d> Playing ‘digits/4.ulaw’ (language ‘en’)
– <SIP/merrMain-00001c5d> Playing ‘digits/9.ulaw’ (language ‘en’)
– <SIP/merrMain-00001c5d> Playing ‘digits/3.ulaw’ (language ‘en’)
– <SIP/merrMain-00001c5d> Playing ‘digits/9.ulaw’ (language ‘en’)
– <SIP/merrMain-00001c5d> Playing ‘digits/4.ulaw’ (language ‘en’)
– <SIP/merrMain-00001c5d> Playing ‘digits/7.ulaw’ (language ‘en’)
– <SIP/merrMain-00001c5d> Playing ‘digits/0.ulaw’ (language ‘en’)
– Executing [s@from-pstn:6] Hangup(“SIP/merrMain-00001c5d”, “”) in new stack
== Spawn extension (from-pstn, s, 6) exited non-zero on ‘SIP/merrMain-00001c5d’
– Executing [h@from-pstn:1] Macro(“SIP/merrMain-00001c5d”, “hangupcall,”) in new stack
– Executing [s@macro-hangupcall:1] GotoIf(“SIP/merrMain-00001c5d”, “1?theend”) in new stack
– Goto (macro-hangupcall,s,3)
– Executing [s@macro-hangupcall:3] Hangup(“SIP/merrMain-00001c5d”, “”) in new stack
== Spawn extension (macro-hangupcall, s, 3) exited non-zero on ‘SIP/merrMain-00001c5d’ in macro ‘hangupcall’
== Spawn extension (from-pstn, h, 1) exited non-zero on ‘SIP/merrMain-00001c5d’

and it plays “Your call can not be completed as dialed”.

Both PBX’s can call any other numbers.

Any ideas on what is wrong?

2

You really don’t give much info, but do you have an inbound route set up for tht DID? Or, at least an ANY/ANY as a catchall…

BF