Auto Provision Cisco 504G phones?

[sentinelace]

We got some free 504G phones. Not bad for free. We have gui access and factory reset them but I do not see an option on where you set the auto provision so we can get the data from freepbx. Any thoughts? I am in as admin and advanced mode

[comtech]

Best approach - EPM with Cisco SPA5XX series phones - remotely

OK - for anyone else that might need to do this, here’s how I ended up getting this done - at least for now. In EPM cloned a template from one of my templates for local SPA509G phones. Adjusted the “Destination Address” to the outside IP of the FreePBX system. Set the Provision Server to be a PC at the local site. Use the Extension Mapping to create an entry for phone with the MAC address of the remote phone. Downloaded the following files/folders from the /tftpboot folder on the FreePBX serve…

[sentinelace]

In my case it was:

tftp://ipOFPBX/spa$MA.xml

[sentinelace]

also it appears you have to manually reboot the phones when this is set