Auto answer and paging not working,

harryincs · December 4, 2014, 5:54am

Hello,

I have a new install of Incrediblepbx on a raspberry PI and everything seems to be working well, especially the fax.

What is not working and i need is the intercom paging feature.
I want to be able to dial an extension and have the phone auto answer so i can have a 2 way conversation.
Additionally, i want to be able to page a group of extension and have a 2 way talk with all participating extensions.

So far, it is not working.
Calling an extension, it just rings
Calling a paging group, they all just ring one or two time and then hang up.
Calling a feature code *8012 they all just ring one or two time and then hang up.

In advanced settings i have Force All Internal Auto Answer to TRUE
It is also enabled in the individual Extension configs.
Paging module is installed and page group 99 created.

I updated all the modules.
FreePBX 2.11.0.42
Asterisk Ver. 11.11.0

The phones i use are Polycom 670, 2 of those. and 1 Bria iphone softphone

Any help would be appreciated.

harryincs · December 4, 2014, 6:44pm

I should also mention that i have searched this board, others and did not find any solution that worked.

harryincs · December 4, 2014, 8:24pm

here’s some asterisk capture logs:

Connected to Asterisk 11.11.0 currently running on incrediblepbx (pid = 3563)
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
– Executing [*8012@from-internal:1] Goto(“SIP/11-00000000”, “ext-intercom,*8012,1”) in new stack
– Goto (ext-intercom,*8012,1)
– Executing [*8012@ext-intercom:1] Macro(“SIP/11-00000000”, “user-callerid,”) in new stack
– Executing [s@macro-user-callerid:1] Set(“SIP/11-00000000”, “TOUCH_MONITOR=1417724383.0”) in new stack
– Executing [s@macro-user-callerid:2] Set(“SIP/11-00000000”, “AMPUSER=11”) in new stack
– Executing [s@macro-user-callerid:3] GotoIf(“SIP/11-00000000”, “0?report”) in new stack
– Executing [s@macro-user-callerid:4] ExecIf(“SIP/11-00000000”, “1?Set(REALCALLERIDNUM=11)”) in new stack
– Executing [s@macro-user-callerid:5] Set(“SIP/11-00000000”, “AMPUSER=11”) in new stack
– Executing [s@macro-user-callerid:6] GotoIf(“SIP/11-00000000”, “0?limit”) in new stack
– Executing [s@macro-user-callerid:7] Set(“SIP/11-00000000”, “AMPUSERCIDNAME=Eric”) in new stack
– Executing [s@macro-user-callerid:8] GotoIf(“SIP/11-00000000”, “0?report”) in new stack
– Executing [s@macro-user-callerid:9] Set(“SIP/11-00000000”, “AMPUSERCID=11”) in new stack
– Executing [s@macro-user-callerid:10] Set(“SIP/11-00000000”, “__DIAL_OPTIONS=tr”) in new stack
– Executing [s@macro-user-callerid:11] Set(“SIP/11-00000000”, “CALLERID(all)=“Eric” <11>”) in new stack
– Executing [s@macro-user-callerid:12] GotoIf(“SIP/11-00000000”, “0?limit”) in new stack
– Executing [s@macro-user-callerid:13] ExecIf(“SIP/11-00000000”, “0?Set(GROUP(concurrency_limit)=11)”) in new stack
– Executing [s@macro-user-callerid:14] GotoIf(“SIP/11-00000000”, “0?continue”) in new stack
– Executing [s@macro-user-callerid:15] Set(“SIP/11-00000000”, “__TTL=64”) in new stack
– Executing [s@macro-user-callerid:16] GotoIf(“SIP/11-00000000”, “1?continue”) in new stack
– Goto (macro-user-callerid,s,27)
– Executing [s@macro-user-callerid:27] Set(“SIP/11-00000000”, “CALLERID(number)=11”) in new stack
– Executing [s@macro-user-callerid:28] Set(“SIP/11-00000000”, “CALLERID(name)=Eric”) in new stack
– Executing [s@macro-user-callerid:29] Set(“SIP/11-00000000”, “CDR(cnum)=11”) in new stack
– Executing [s@macro-user-callerid:30] Set(“SIP/11-00000000”, “CDR(cnam)=Eric”) in new stack
– Executing [s@macro-user-callerid:31] Set(“SIP/11-00000000”, “CHANNEL(language)=en”) in new stack
– Executing [*8012@ext-intercom:2] Set(“SIP/11-00000000”, “dialnumber=12”) in new stack
– Executing [*8012@ext-intercom:3] Set(“SIP/11-00000000”, “INTERCOM_CALL=TRUE”) in new stack
– Executing [*8012@ext-intercom:4] Gosub(“SIP/11-00000000”, “sub-record-check,s,1(exten,12)”) in new stack
– Executing [s@sub-record-check:1] Set(“SIP/11-00000000”, “REC_POLICY_MODE_SAVE=”) in new stack
– Executing [s@sub-record-check:2] GotoIf(“SIP/11-00000000”, “1?check”) in new stack
– Goto (sub-record-check,s,7)
– Executing [s@sub-record-check:7] Set(“SIP/11-00000000”, “__MON_FMT=wav”) in new stack
– Executing [s@sub-record-check:8] GotoIf(“SIP/11-00000000”, “1?next”) in new stack
– Goto (sub-record-check,s,11)
– Executing [s@sub-record-check:11] ExecIf(“SIP/11-00000000”, “0?Return()”) in new stack
– Executing [s@sub-record-check:12] ExecIf(“SIP/11-00000000”, “0?Set(__REC_POLICY_MODE=)”) in new stack
– Executing [s@sub-record-check:13] GotoIf(“SIP/11-00000000”, “0?exten,1”) in new stack
– Executing [s@sub-record-check:14] Set(“SIP/11-00000000”, “__REC_STATUS=INITIALIZED”) in new stack
– Executing [s@sub-record-check:15] Set(“SIP/11-00000000”, “NOW=1417724383”) in new stack
– Executing [s@sub-record-check:16] Set(“SIP/11-00000000”, “__DAY=04”) in new stack
– Executing [s@sub-record-check:17] Set(“SIP/11-00000000”, “__MONTH=12”) in new stack
– Executing [s@sub-record-check:18] Set(“SIP/11-00000000”, “__YEAR=2014”) in new stack
– Executing [s@sub-record-check:19] Set(“SIP/11-00000000”, “__TIMESTR=20141204-121943”) in new stack
– Executing [s@sub-record-check:20] Set(“SIP/11-00000000”, “__FROMEXTEN=11”) in new stack
– Executing [s@sub-record-check:21] Set(“SIP/11-00000000”, “__CALLFILENAME=exten-12-11-20141204-121943-1417724383.0”) in new stack
– Executing [s@sub-record-check:22] Goto(“SIP/11-00000000”, “exten,1”) in new stack
– Goto (sub-record-check,exten,1)
– Executing [exten@sub-record-check:1] GotoIf(“SIP/11-00000000”, “0?callee”) in new stack
– Executing [exten@sub-record-check:2] Set(“SIP/11-00000000”, “__REC_POLICY_MODE=dontcare”) in new stack
– Executing [exten@sub-record-check:3] GotoIf(“SIP/11-00000000”, “1?caller”) in new stack
– Goto (sub-record-check,exten,10)
– Executing [exten@sub-record-check:10] Set(“SIP/11-00000000”, “__REC_POLICY_MODE=dontcare”) in new stack
– Executing [exten@sub-record-check:11] GosubIf(“SIP/11-00000000”, “0?record,1(exten,12,11)”) in new stack
– Executing [exten@sub-record-check:12] Return(“SIP/11-00000000”, “”) in new stack
– Executing [*8012@ext-intercom:5] GotoIf(“SIP/11-00000000”, “0?end”) in new stack
– Executing [*8012@ext-intercom:6] GotoIf(“SIP/11-00000000”, “0?end”) in new stack
– Executing [*8012@ext-intercom:7] GotoIf(“SIP/11-00000000”, “0?allow”) in new stack
– Executing [*8012@ext-intercom:8] GotoIf(“SIP/11-00000000”, “0?nointercom”) in new stack
– Executing [*8012@ext-intercom:9] GotoIf(“SIP/11-00000000”, “0?nointercom”) in new stack
– Executing [*8012@ext-intercom:10] Set(“SIP/11-00000000”, “DEVICES=12”) in new stack
– Executing [*8012@ext-intercom:11] GotoIf(“SIP/11-00000000”, “0?end”) in new stack
– Executing [*8012@ext-intercom:12] Set(“SIP/11-00000000”, “LOOPCNT=1”) in new stack
– Executing [*8012@ext-intercom:13] Set(“SIP/11-00000000”, “_SIPURI=”) in new stack
– Executing [*8012@ext-intercom:14] Set(“SIP/11-00000000”, “_ALERTINFO=Alert-Info: Ring Answer”) in new stack
– Executing [*8012@ext-intercom:15] Set(“SIP/11-00000000”, “_CALLINFO=Call-Info: ;answer-after=0”) in new stack
– Executing [*8012@ext-intercom:16] Set(“SIP/11-00000000”, “_SIPURI=intercom=true”) in new stack
– Executing [*8012@ext-intercom:17] Set(“SIP/11-00000000”, “_DOPTIONS=A(beep)”) in new stack
– Executing [*8012@ext-intercom:18] Set(“SIP/11-00000000”, “_DTIME=5”) in new stack
– Executing [*8012@ext-intercom:19] Set(“SIP/11-00000000”, “_ANSWERMACRO=”) in new stack
– Executing [*8012@ext-intercom:20] GotoIf(“SIP/11-00000000”, “0?pagemode”) in new stack
– Executing [*8012@ext-intercom:21] Macro(“SIP/11-00000000”, “autoanswer,12”) in new stack
– Executing [s@macro-autoanswer:1] Set(“SIP/11-00000000”, “DIAL=SIP/12”) in new stack
– Executing [s@macro-autoanswer:2] ExecIf(“SIP/11-00000000”, “0?Set(DIAL=DAHDI/12)”) in new stack
– Executing [s@macro-autoanswer:3] GotoIf(“SIP/11-00000000”, “0?macro”) in new stack
– Executing [s@macro-autoanswer:4] Set(“SIP/11-00000000”, “phone=”) in new stack
– Executing [s@macro-autoanswer:5] ExecIf(“SIP/11-00000000”, “0?Set(CALLINFO=Call-Info: sip:broadworks.net;answer-after=0)”) in new stack
– Executing [s@macro-autoanswer:6] ExecIf(“SIP/11-00000000”, “0?Set(ALERTINFO=Alert-Info: Intercom)”) in new stack
– Executing [s@macro-autoanswer:7] ExecIf(“SIP/11-00000000”, “0?Set(ALERTINFO=Alert-Info: info=Auto Answer)”) in new stack
– Executing [s@macro-autoanswer:8] ExecIf(“SIP/11-00000000”, “0?Set(ALERTINFO=Alert-Info: ring-answer)”) in new stack
– Executing [s@macro-autoanswer:9] ExecIf(“SIP/11-00000000”, “1?SipAddHeader(Alert-Info: Ring Answer)”) in new stack
– Executing [s@macro-autoanswer:10] ExecIf(“SIP/11-00000000”, “1?SipAddHeader(Call-Info: ;answer-after=0)”) in new stack
– Executing [s@macro-autoanswer:11] ExecIf(“SIP/11-00000000”, “1?Set(__SIP_URI_OPTIONS=intercom=true)”) in new stack
– Executing [*8012@ext-intercom:22] ChanIsAvail(“SIP/11-00000000”, “SIP/12,s”) in new stack
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
– Executing [*8012@ext-intercom:23] GotoIf(“SIP/11-00000000”, “0?end”) in new stack
– Executing [*8012@ext-intercom:24] GotoIf(“SIP/11-00000000”, “0?godial”) in new stack
– Executing [*8012@ext-intercom:25] Set(“SIP/11-00000000”, “CONNECTEDLINE(name,i)=Sean”) in new stack
– Executing [*8012@ext-intercom:26] Set(“SIP/11-00000000”, “CONNECTEDLINE(num)=12”) in new stack
– Executing [*8012@ext-intercom:27] Dial(“SIP/11-00000000”, “SIP/12,5,IA(beep)”) in new stack
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
– Called SIP/12
– Connected line update to SIP/11-00000000 prevented.
– SIP/12-00000002 is ringing
– Nobody picked up in 5000 ms
– Executing [*8012@ext-intercom:28] ExecIf(“SIP/11-00000000”, “?Return()”) in new stack
– Executing [*8012@ext-intercom:29] Busy(“SIP/11-00000000”, “20”) in new stack
== Spawn extension (ext-intercom, 8012, 29) exited non-zero on 'SIP/11-00000000’
incrediblepbxCLI>

harryincs · December 4, 2014, 8:29pm

here are logs when i dial 99, the paging group extension

incrediblepbxCLI>
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
– Executing [99@from-internal:1] Goto(“SIP/11-00000003”, “app-pagegroups,99,1”) in new stack
– Goto (app-pagegroups,99,1)
– Executing [99@app-pagegroups:1] Macro(“SIP/11-00000003”, “user-callerid,”) in new stack
– Executing [s@macro-user-callerid:1] Set(“SIP/11-00000003”, “TOUCH_MONITOR=1417724785.3”) in new stack
– Executing [s@macro-user-callerid:2] Set(“SIP/11-00000003”, “AMPUSER=11”) in new stack
– Executing [s@macro-user-callerid:3] GotoIf(“SIP/11-00000003”, “0?report”) in new stack
– Executing [s@macro-user-callerid:4] ExecIf(“SIP/11-00000003”, “1?Set(REALCALLERIDNUM=11)”) in new stack
– Executing [s@macro-user-callerid:5] Set(“SIP/11-00000003”, “AMPUSER=11”) in new stack
– Executing [s@macro-user-callerid:6] GotoIf(“SIP/11-00000003”, “0?limit”) in new stack
– Executing [s@macro-user-callerid:7] Set(“SIP/11-00000003”, “AMPUSERCIDNAME=Eric”) in new stack
– Executing [s@macro-user-callerid:8] GotoIf(“SIP/11-00000003”, “0?report”) in new stack
– Executing [s@macro-user-callerid:9] Set(“SIP/11-00000003”, “AMPUSERCID=11”) in new stack
– Executing [s@macro-user-callerid:10] Set(“SIP/11-00000003”, “__DIAL_OPTIONS=tr”) in new stack
– Executing [s@macro-user-callerid:11] Set(“SIP/11-00000003”, “CALLERID(all)=“Eric” <11>”) in new stack
– Executing [s@macro-user-callerid:12] GotoIf(“SIP/11-00000003”, “0?limit”) in new stack
– Executing [s@macro-user-callerid:13] ExecIf(“SIP/11-00000003”, “0?Set(GROUP(concurrency_limit)=11)”) in new stack
– Executing [s@macro-user-callerid:14] GotoIf(“SIP/11-00000003”, “0?continue”) in new stack
– Executing [s@macro-user-callerid:15] Set(“SIP/11-00000003”, “__TTL=64”) in new stack
– Executing [s@macro-user-callerid:16] GotoIf(“SIP/11-00000003”, “1?continue”) in new stack
– Goto (macro-user-callerid,s,27)
– Executing [s@macro-user-callerid:27] Set(“SIP/11-00000003”, “CALLERID(number)=11”) in new stack
– Executing [s@macro-user-callerid:28] Set(“SIP/11-00000003”, “CALLERID(name)=Eric”) in new stack
– Executing [s@macro-user-callerid:29] Set(“SIP/11-00000003”, “CDR(cnum)=11”) in new stack
– Executing [s@macro-user-callerid:30] Set(“SIP/11-00000003”, “CDR(cnam)=Eric”) in new stack
– Executing [s@macro-user-callerid:31] Set(“SIP/11-00000003”, “CHANNEL(language)=en”) in new stack
– Executing [99@app-pagegroups:2] Set(“SIP/11-00000003”, “_PAGEGROUP=99”) in new stack
– Executing [99@app-pagegroups:3] GotoIf(“SIP/11-00000003”, “1?:busy”) in new stack
– Executing [99@app-pagegroups:4] Set(“SIP/11-00000003”, “DEVICE_STATE(Custom:PAGE99)=INUSE”) in new stack
– Executing [99@app-pagegroups:5] Answer(“SIP/11-00000003”, “”) in new stack
> 0xb2f1ba10 – Probation passed - setting RTP source address to 192.168.169.72:2228
– Executing [99@app-pagegroups:6] Gosub(“SIP/11-00000003”, “app-paging,ssetup,1()”) in new stack
– Executing [ssetup@app-paging:1] Set(“SIP/11-00000003”, “_SIPURI=”) in new stack
– Executing [ssetup@app-paging:2] Set(“SIP/11-00000003”, “_ALERTINFO=Alert-Info: Ring Answer”) in new stack
– Executing [ssetup@app-paging:3] Set(“SIP/11-00000003”, “_CALLINFO=Call-Info: ;answer-after=0”) in new stack
– Executing [ssetup@app-paging:4] Set(“SIP/11-00000003”, “_SIPURI=intercom=true”) in new stack
– Executing [ssetup@app-paging:5] Set(“SIP/11-00000003”, “_DOPTIONS=A(beep)”) in new stack
– Executing [ssetup@app-paging:6] Set(“SIP/11-00000003”, “_DTIME=5”) in new stack
– Executing [ssetup@app-paging:7] Set(“SIP/11-00000003”, “_ANSWERMACRO=”) in new stack
– Executing [ssetup@app-paging:8] Set(“SIP/11-00000003”, “PAGE_CONF=1417724785953”) in new stack
– Executing [ssetup@app-paging:9] Return(“SIP/11-00000003”, “”) in new stack
– Executing [99@app-pagegroups:7] Set(“SIP/11-00000003”, “PAGEMODE=SPAGE”) in new stack
– Executing [99@app-pagegroups:8] Set(“SIP/11-00000003”, “PAGE_MEMBERS=10-11-12-20”) in new stack
– Executing [99@app-pagegroups:9] Set(“SIP/11-00000003”, “PAGE_CONF_OPTS=duplex”) in new stack
– Executing [99@app-pagegroups:10] AGI(“SIP/11-00000003”, “page.agi”) in new stack
– Launched AGI Script /var/lib/asterisk/agi-bin/page.agi
– Executing [s@app-page-stream:1] Wait(“Local/s@app-page-stream-00000000;2”, “1”) in new stack
– Executing [PAGE10@app-paging:1] Macro(“Local/PAGE10@app-paging-00000001;2”, “autoanswer,10”) in new stack
– Executing [PAGE12@app-paging:1] Macro(“Local/PAGE12@app-paging-00000002;2”, “autoanswer,12”) in new stack
– Executing [s@macro-autoanswer:1] Set(“Local/PAGE10@app-paging-00000001;2”, “DIAL=SIP/10”) in new stack
– Executing [s@macro-autoanswer:2] ExecIf(“Local/PAGE10@app-paging-00000001;2”, “0?Set(DIAL=DAHDI/10)”) in new stack
– Executing [s@macro-autoanswer:1] Set(“Local/PAGE12@app-paging-00000002;2”, “DIAL=SIP/12”) in new stack
– Executing [s@macro-autoanswer:2] ExecIf(“Local/PAGE12@app-paging-00000002;2”, “0?Set(DIAL=DAHDI/12)”) in new stack
– Executing [s@macro-autoanswer:3] GotoIf(“Local/PAGE10@app-paging-00000001;2”, “0?macro”) in new stack
– Executing [s@macro-autoanswer:4] Set(“Local/PAGE10@app-paging-00000001;2”, “phone=”) in new stack
– Executing [s@macro-autoanswer:3] GotoIf(“Local/PAGE12@app-paging-00000002;2”, “0?macro”) in new stack
– Executing [s@macro-autoanswer:4] Set(“Local/PAGE12@app-paging-00000002;2”, “phone=”) in new stack
– Executing [s@macro-autoanswer:5] ExecIf(“Local/PAGE10@app-paging-00000001;2”, “0?Set(CALLINFO=Call-Info: sip:broadworks.net;answer-after=0)”) in new stack
– Executing [s@macro-autoanswer:5] ExecIf(“Local/PAGE12@app-paging-00000002;2”, “0?Set(CALLINFO=Call-Info: sip:broadworks.net;answer-after=0)”) in new stack
– Executing [s@macro-autoanswer:6] ExecIf(“Local/PAGE10@app-paging-00000001;2”, “0?Set(ALERTINFO=Alert-Info: Intercom)”) in new stack
– Executing [s@macro-autoanswer:7] ExecIf(“Local/PAGE10@app-paging-00000001;2”, “0?Set(ALERTINFO=Alert-Info: info=Auto Answer)”) in new stack
– Executing [s@macro-autoanswer:8] ExecIf(“Local/PAGE10@app-paging-00000001;2”, “0?Set(ALERTINFO=Alert-Info: ring-answer)”) in new stack
– Executing [s@app-page-stream:1] Wait(“Local/s@app-page-stream-00000004;2”, “1”) in new stack
– Executing [s@macro-autoanswer:6] ExecIf(“Local/PAGE12@app-paging-00000002;2”, “0?Set(ALERTINFO=Alert-Info: Intercom)”) in new stack
– Executing [PAGE20@app-paging:1] Macro(“Local/PAGE20@app-paging-00000003;2”, “autoanswer,20”) in new stack
– Executing [s@macro-autoanswer:1] Set(“Local/PAGE20@app-paging-00000003;2”, “DIAL=SIP/20”) in new stack
– Executing [s@macro-autoanswer:2] ExecIf(“Local/PAGE20@app-paging-00000003;2”, “0?Set(DIAL=DAHDI/20)”) in new stack
– Executing [s@macro-autoanswer:3] GotoIf(“Local/PAGE20@app-paging-00000003;2”, “0?macro”) in new stack
– Executing [s@macro-autoanswer:4] Set(“Local/PAGE20@app-paging-00000003;2”, “phone=Bria iOS 3.2.1”) in new stack
– Executing [s@macro-autoanswer:5] ExecIf(“Local/PAGE20@app-paging-00000003;2”, “0?Set(CALLINFO=Call-Info: sip:broadworks.net;answer-after=0)”) in new stack
– Executing [s@macro-autoanswer:7] ExecIf(“Local/PAGE12@app-paging-00000002;2”, “0?Set(ALERTINFO=Alert-Info: info=Auto Answer)”) in new stack
– Executing [s@macro-autoanswer:8] ExecIf(“Local/PAGE12@app-paging-00000002;2”, “0?Set(ALERTINFO=Alert-Info: ring-answer)”) in new stack
– Executing [s@macro-autoanswer:9] ExecIf(“Local/PAGE12@app-paging-00000002;2”, “1?SipAddHeader(Alert-Info: Ring Answer)”) in new stack
– Executing [s@macro-autoanswer:9] ExecIf(“Local/PAGE10@app-paging-00000001;2”, “1?SipAddHeader(Alert-Info: Ring Answer)”) in new stack
– Executing [s@macro-autoanswer:10] ExecIf(“Local/PAGE10@app-paging-00000001;2”, “1?SipAddHeader(Call-Info: ;answer-after=0)”) in new stack
– Executing [s@macro-autoanswer:6] ExecIf(“Local/PAGE20@app-paging-00000003;2”, “0?Set(ALERTINFO=Alert-Info: Intercom)”) in new stack
– Executing [s@macro-autoanswer:10] ExecIf(“Local/PAGE12@app-paging-00000002;2”, “1?SipAddHeader(Call-Info: ;answer-after=0)”) in new stack
– Executing [s@macro-autoanswer:11] ExecIf(“Local/PAGE12@app-paging-00000002;2”, “1?Set(__SIP_URI_OPTIONS=intercom=true)”) in new stack
– Executing [PAGE12@app-paging:2] Dial(“Local/PAGE12@app-paging-00000002;2”, “SIP/12,5,A(beep)”) in new stack
– Executing [s@macro-autoanswer:11] ExecIf(“Local/PAGE10@app-paging-00000001;2”, “1?Set(__SIP_URI_OPTIONS=intercom=true)”) in new stack
– Executing [PAGE10@app-paging:2] Dial(“Local/PAGE10@app-paging-00000001;2”, “SIP/10,5,A(beep)”) in new stack
– Executing [s@macro-autoanswer:7] ExecIf(“Local/PAGE20@app-paging-00000003;2”, “0?Set(ALERTINFO=Alert-Info: info=Auto Answer)”) in new stack
– Executing [s@macro-autoanswer:8] ExecIf(“Local/PAGE20@app-paging-00000003;2”, “0?Set(ALERTINFO=Alert-Info: ring-answer)”) in new stack
– Executing [s@macro-autoanswer:9] ExecIf(“Local/PAGE20@app-paging-00000003;2”, “1?SipAddHeader(Alert-Info: Ring Answer)”) in new stack
– Executing [s@macro-autoanswer:10] ExecIf(“Local/PAGE20@app-paging-00000003;2”, “1?SipAddHeader(Call-Info: ;answer-after=0)”) in new stack
– Executing [s@macro-autoanswer:11] ExecIf(“Local/PAGE20@app-paging-00000003;2”, “1?Set(__SIP_URI_OPTIONS=intercom=true)”) in new stack
== Everyone is busy/congested at this time (1:0/0/1)
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
– Executing [PAGE10@app-paging:3] Hangup(“Local/PAGE10@app-paging-00000001;2”, “”) in new stack
== Spawn extension (app-paging, PAGE10, 3) exited non-zero on ‘Local/PAGE10@app-paging-00000001;2’
– Executing [PAGE20@app-paging:2] Dial(“Local/PAGE20@app-paging-00000003;2”, “SIP/20,5,A(beep)”) in new stack
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
– Called SIP/12
– Called SIP/20
– SIP/12-00000004 is ringing
– <SIP/11-00000003>AGI Script page.agi completed, returning 0
– SIP/20-00000005 is ringing
– Executing [99@app-pagegroups:11] Set(“SIP/11-00000003”, “CONFBRIDGE(user,template)=page_user_duplex”) in new stack
– Executing [99@app-pagegroups:12] Set(“SIP/11-00000003”, “CONFBRIDGE(user,admin)=yes”) in new stack
– Executing [99@app-pagegroups:13] Set(“SIP/11-00000003”, “CONFBRIDGE(user,marked)=yes”) in new stack
– Executing [99@app-pagegroups:14] ConfBridge(“SIP/11-00000003”, “1417724785953,admin_menu”) in new stack
– Executing [s@app-page-stream:2] Answer(“Local/s@app-page-stream-00000000;2”, “”) in new stack
> Channel Local/s@app-page-stream-00000000;1 was answered.
> Launching Wait(5) on Local/s@app-page-stream-00000000;1
– Executing [s@app-page-stream:2] Answer(“Local/s@app-page-stream-00000004;2”, “”) in new stack
> Channel Local/s@app-page-stream-00000004;1 was answered.
> Launching Playback(beep) on Local/s@app-page-stream-00000004;1
– Executing [s@app-page-stream:3] Set(“Local/s@app-page-stream-00000004;2”, “CONFBRIDGE(user,template)=page_user_duplex”) in new stack
– Executing [s@app-page-stream:4] Set(“Local/s@app-page-stream-00000004;2”, “CONFBRIDGE(user,marked)=yes”) in new stack
– Executing [s@app-page-stream:5] ConfBridge(“Local/s@app-page-stream-00000004;2”, “1417724785953,”) in new stack
– <Local/s@app-page-stream-00000004;1> Playing ‘beep.slin’ (language ‘en’)
– Executing [s@app-page-stream:3] Set(“Local/s@app-page-stream-00000000;2”, “CONFBRIDGE(user,template)=page_user_duplex”) in new stack
– Executing [s@app-page-stream:4] Set(“Local/s@app-page-stream-00000000;2”, “CONFBRIDGE(user,marked)=yes”) in new stack
– Executing [s@app-page-stream:5] ConfBridge(“Local/s@app-page-stream-00000000;2”, “1417724785953,”) in new stack
– Nobody picked up in 5000 ms
– Executing [PAGE12@app-paging:3] Hangup(“Local/PAGE12@app-paging-00000002;2”, “”) in new stack
== Spawn extension (app-paging, PAGE12, 3) exited non-zero on ‘Local/PAGE12@app-paging-00000002;2’
– Nobody picked up in 5000 ms
– Executing [PAGE20@app-paging:3] Hangup(“Local/PAGE20@app-paging-00000003;2”, “”) in new stack
== Spawn extension (app-paging, PAGE20, 3) exited non-zero on 'Local/PAGE20@app-paging-00000003;2’
incrediblepbxCLI>

harryincs · December 4, 2014, 10:33pm

So i provisioned a Linksys SPA942 and paging the page group from a Polycom works, but not the other way around. The linksys picks up but the other polycom does not.

also from the Linksys dialing *8012 does not work (rings busy) but it does work from a Polycom when paging the linksys direct.

seems the issue is with the individual phone configs then. I set them all up from their web browsers by just entering the server IP and user credentials.

Where can i specify more settings for each phone in the CLI? The freepbx GUI seems limited

harryincs · December 5, 2014, 1:24am

I fixed it myself, the Polycoms now auto-answer pages.
To fix, i uploaded this cfg file using the phone’s browser.

<voIpProt.SIP.alertInfo
voIpProt.SIP.alertInfo.18.class=“autoAnswer”
voIpProt.SIP.alertInfo.18.value=“Auto Answer”

</voIpProt.SIP.alertInfo>
<se.rt.ringAutoAnswer
se.rt.ringAutoAnswer.callWait=“callWaiting”
se.rt.ringAutoAnswer.micMute=“0”
se.rt.ringAutoAnswer.name=“Ring Answer”
se.rt.ringAutoAnswer.ringer=“ringer2”
se.rt.ringAutoAnswer.timeout=“500”
se.rt.ringAutoAnswer.type=“ring-answer”

</se.rt.ringAutoAnswer>
<se.rt.autoAnswer
se.rt.autoAnswer.callWait=“ringer2”
se.rt.autoAnswer.micMute=“0”
se.rt.autoAnswer.name=“Auto Answer”
se.rt.autoAnswer.ringer=“ringer2”
se.rt.autoAnswer.timeout=“2000”
se.rt.autoAnswer.type=“answer”

</se.rt.autoAnswer>

<voIpProt.SIP.alertInfo
voIpProt.SIP.alertInfo.1.class=“custom1”
voIpProt.SIP.alertInfo.1.value=“ringer1”
voIpProt.SIP.alertInfo.2.class=“custom2”
voIpProt.SIP.alertInfo.2.value=“ringer2”
voIpProt.SIP.alertInfo.3.class=“custom3”
voIpProt.SIP.alertInfo.3.value=“ringer3”
voIpProt.SIP.alertInfo.4.class=“custom4”
voIpProt.SIP.alertInfo.4.value=“ringer4”
voIpProt.SIP.alertInfo.5.class=“custom5”
voIpProt.SIP.alertInfo.5.value=“ringer5”
voIpProt.SIP.alertInfo.6.class=“custom6”
voIpProt.SIP.alertInfo.6.value=“ringer6”
voIpProt.SIP.alertInfo.7.class=“custom7”
voIpProt.SIP.alertInfo.7.value=“ringer7”
voIpProt.SIP.alertInfo.8.class=“custom8”
voIpProt.SIP.alertInfo.8.value=“ringer8”
voIpProt.SIP.alertInfo.9.class=“custom9”
voIpProt.SIP.alertInfo.9.value=“ringer9”
voIpProt.SIP.alertInfo.10.class=“custom10”
voIpProt.SIP.alertInfo.10.value=“ringerA”
voIpProt.SIP.alertInfo.11.class=“custom11”
voIpProt.SIP.alertInfo.11.value=“ringerB”
voIpProt.SIP.alertInfo.12.class=“custom12”
voIpProt.SIP.alertInfo.12.value=“ringerC”
voIpProt.SIP.alertInfo.13.class=“custom13”
voIpProt.SIP.alertInfo.13.value=“ringerD”
voIpProt.SIP.alertInfo.14.class=“custom14”
voIpProt.SIP.alertInfo.14.value=“ringerE”
voIpProt.SIP.alertInfo.15.class=“custom2”
voIpProt.SIP.alertInfo.15.value=“Bellcore-dr1”
voIpProt.SIP.alertInfo.16.class=“custom3”
voIpProt.SIP.alertInfo.16.value=“Bellcore-dr2”
voIpProt.SIP.alertInfo.17.class=“custom11”
voIpProt.SIP.alertInfo.17.value=“Bellcore-dr3”

</voIpProt.SIP.alertInfo>
<se.rt.default
se.rt.default.callWait=“callWaiting”
se.rt.default.micMute=“0”
se.rt.default.name=“Default”
se.rt.default.ringer=“ringer2”
se.rt.default.timeout=“2000”
se.rt.default.type=“ring”

</se.rt.default>
<se.rt.custom1
se.rt.custom1.callWait=“callWaiting”
se.rt.custom1.micMute=“0”
se.rt.custom1.name=“custom1”
se.rt.custom1.ringer=“ringer1”
se.rt.custom1.timeout=“2000”
se.rt.custom1.type=“ring”

</se.rt.custom1>
<se.rt.custom2
se.rt.custom2.callWait=“callWaiting”
se.rt.custom2.micMute=“0”
se.rt.custom2.name=“custom2”
se.rt.custom2.ringer=“ringer2”
se.rt.custom2.timeout=“2000”
se.rt.custom2.type=“ring”

</se.rt.custom2>
<se.rt.custom3
se.rt.custom3.callWait=“callWaiting”
se.rt.custom3.micMute=“0”
se.rt.custom3.name=“custom3”
se.rt.custom3.ringer=“ringer3”
se.rt.custom3.timeout=“2000”
se.rt.custom3.type=“ring”

</se.rt.custom3>
<se.rt.custom4
se.rt.custom4.callWait=“callWaiting”
se.rt.custom4.micMute=“0”
se.rt.custom4.name=“custom4”
se.rt.custom4.ringer=“ringer4”
se.rt.custom4.timeout=“2000”
se.rt.custom4.type=“ring”

</se.rt.custom4>
<se.rt.custom5
se.rt.custom5.callWait=“callWaiting”
se.rt.custom5.micMute=“0”
se.rt.custom5.name=“custom5”
se.rt.custom5.ringer=“ringer5”
se.rt.custom5.timeout=“2000”
se.rt.custom5.type=“ring”

</se.rt.custom5>
<se.rt.custom6
se.rt.custom6.callWait=“callWaiting”
se.rt.custom6.micMute=“0”
se.rt.custom6.name=“custom6”
se.rt.custom6.ringer=“ringer6”
se.rt.custom6.timeout=“2000”
se.rt.custom6.type=“ring”

</se.rt.custom6>
<se.rt.custom7
se.rt.custom7.callWait=“callWaiting”
se.rt.custom7.micMute=“0”
se.rt.custom7.name=“custom7”
se.rt.custom7.ringer=“ringer7”
se.rt.custom7.timeout=“2000”
se.rt.custom7.type=“ring”

</se.rt.custom7>
<se.rt.custom8
se.rt.custom8.callWait=“callWaiting”
se.rt.custom8.micMute=“0”
se.rt.custom8.name=“custom8”
se.rt.custom8.ringer=“ringer8”
se.rt.custom8.timeout=“2000”
se.rt.custom8.type=“ring”

</se.rt.custom8>
<se.rt.custom9
se.rt.custom9.callWait=“callWaiting”
se.rt.custom9.micMute=“0”
se.rt.custom9.name=“custom9”
se.rt.custom9.ringer=“ringer9”
se.rt.custom9.timeout=“2000”
se.rt.custom9.type=“ring”

</se.rt.custom9>
<se.rt.custom10
se.rt.custom10.callWait=“callWaiting”
se.rt.custom10.micMute=“0”
se.rt.custom10.name=“custom10”
se.rt.custom10.ringer=“ringer10”
se.rt.custom10.timeout=“2000”
se.rt.custom10.type=“ring”

</se.rt.custom10>
<se.rt.custom11
se.rt.custom11.callWait=“callWaiting”
se.rt.custom11.micMute=“0”
se.rt.custom11.name=“custom11”
se.rt.custom11.ringer=“ringer11”
se.rt.custom11.timeout=“2000”
se.rt.custom11.type=“ring”

</se.rt.custom11>
<se.rt.custom12
se.rt.custom12.callWait=“callWaiting”
se.rt.custom12.micMute=“0”
se.rt.custom12.name=“custom12”
se.rt.custom12.ringer=“ringer12”
se.rt.custom12.timeout=“2000”
se.rt.custom12.type=“ring”

</se.rt.custom12>
<se.rt.custom13
se.rt.custom13.callWait=“callWaiting”
se.rt.custom13.micMute=“0”
se.rt.custom13.name=“custom13”
se.rt.custom13.ringer=“ringer13”
se.rt.custom13.timeout=“2000”
se.rt.custom13.type=“ring”

</se.rt.custom13>
<se.rt.custom14
se.rt.custom14.callWait=“callWaiting”
se.rt.custom14.micMute=“0”
se.rt.custom14.name=“custom14”
se.rt.custom14.ringer=“ringer14”
se.rt.custom14.timeout=“2000”
se.rt.custom14.type=“ring”

</se.rt.custom14>

AdHominem · December 8, 2014, 6:35am

Just found this. I wrote a comprehensive instruction on how to configure Polycom phones here:

http://wiki.freepbx.org/display/SP/Polycom