Howdy,
I`m sitting on an Asterisk 1.8.13.0 with freepbx 2.10 and i have a siemens hipath 1100 … for 4-5 years it has been connected to the siemens via an extension line.
people would dial the extension line and get a tone in the aterisk and with that they could dial an interior for the aterix.
A fresh install was needed and right now i`m having trouble setting up the channels
voip*CLI> dahdi show channels
Chan Extension Context Language MOH Interpret Blocked State
pseudo default default In Service
[root@voip ~]# dahdi_scan
[1]
active=yes
alarms=OK
description=Wildcard TDM400P REV I Board 5
name=WCTDM/4
manufacturer=Digium
devicetype=Wildcard TDM400P REV I
location=PCI Bus 07 Slot 08
basechan=1
totchans=4
irq=17
type=analog
port=1,FXS
port=2,FXS
port=3,FXO
port=4,FXO
[2]
active=yes
alarms=OK
description=Wildcard TDM400P REV I Board 5
name=WCTDM/4
manufacturer=Digium
devicetype=Wildcard TDM400P REV I
location=PCI Bus 07 Slot 09
basechan=5
totchans=4
irq=18
type=analog
port=5,FXO
port=6,FXO
port=7,FXO
port=8,FXO
i connected one line to port 1 and the other to port 4, created a few trunks in the freepbx but no cigar 