[Amportal-users] That is not a valid conference number

Not true if you are using a 2.6 kernel. Asterisk can use the hires
kernel timer for it’s timing.

Can you post the content of your meetme_additional.conf


Andre Courchesne
Concepteur Logiciel - Software Developper
[email protected]

PrivalODC Inc.
426 Victoria, bureau 12
St-Lambert, QC
J4P 2H9

Web.: http://www.prival.ca
Tel.: (450) 761-9973 poste 635
1-866-761-9973
Fax.: (450) 761-9842

Ce message électronique ainsi que tous les documents annexés s’adressent
exclusivement à la personne ou à l’entité inscrite
dans la rubrique destinataire ; il peut contenir des
renseignements de nature confidentielle ou privilégiée aux
termes des lois applicables. Nulle autre personne ne doit y
avoir accès. Si vous n’êtes pas le destinataire convenu, nous
vous avisons par la présente qu’il est strictement interdit
d’en divulguer le contenu, de le distribuer, le copier ou
l’utiliser. Veuillez aviser l’expéditeur immédiatement par
retour de courrier électronique et supprimer ce message de
votre système. Toute diffusion ou reproduction de ce document
ainsi que tout mesure prise à l’égard de la présente sont
formellement interdites .

Azfhasterisk wrote:

[quote] Do you have zaptel installed? If you are not using a card of any type you
have to have a USB port on the machine and ztdummy running.

Rick

-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of benmack
Sent: Friday, November 24, 2006 11:06 AM
To: [email protected]
Subject: [Amportal-users] That is not a valid conference number

Hi All

Small hitch setting up a conference - whatever I do, the user always gets
the message “that is not a valid conference number”, after entering the PIN

If I enter the wrong PIN, it tells me, so it is clearly associating the call
with the correct conference

Below is what appears on the cli:-

 -- Executing Set("SIP/3001-08b2e480", "MEETME_ROOMNUM=5") in new stack
 -- Executing GotoIf("SIP/3001-08b2e480", "0?READPIN") in new stack
 -- Executing Answer("SIP/3001-08b2e480", "") in new stack
 -- Executing Wait("SIP/3001-08b2e480", "1") in new stack
 -- Executing Read("SIP/3001-08b2e480", "PIN|enter-conf-pin-number||") in

new stack
– Playing ‘enter-conf-pin-number’ (language ‘en’)
– User entered ‘5’
– Executing GotoIf(“SIP/3001-08b2e480”, “1?USER”) in new stack
– Goto (from-internal,5,9)
– Executing Set(“SIP/3001-08b2e480”, “MEETME_OPTS=ciMs”) in new stack
– Executing Goto(“SIP/3001-08b2e480”, “STARTMEETME|1”) in new stack
– Goto (from-internal,STARTMEETME,1)
– Executing MeetMe(“SIP/3001-08b2e480”, “5|ciMs|5”) in new stack
== Parsing ‘/etc/asterisk/meetme.conf’: Found
== Parsing ‘/etc/asterisk/meetme_additional.conf’: Found
– Playing ‘conf-invalid’ (language ‘en’)

Any ideas?

Cheers


Ben


Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net’s Techsay panel and you’ll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV


Amportal-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/amportal-users


Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net’s Techsay panel and you’ll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV


Amportal-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/amportal-users

[/quote]


Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net’s Techsay panel and you’ll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV


Amportal-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/amportal-users

Post generated using Mail2Forum (http://www.mail2forum.com)

(Not really an amportal question but…)

Does anyone know why Asterisk says “That is not a valid conference number” instead of “Conference timing source not valid”, or something else as useful?

[quote] -----Original Message-----
From: [email protected]
[mailto:[email protected]] On
Behalf Of Andre Courchesne
Sent: 24 November 2006 18:50
To: [email protected]
Subject: Re: [Amportal-users] That is not a valid conference number

Not true if you are using a 2.6 kernel. Asterisk can use the
hires kernel timer for it’s timing.

Can you post the content of your meetme_additional.conf


Andre Courchesne
Concepteur Logiciel - Software Developper [email protected]

PrivalODC Inc.
426 Victoria, bureau 12
St-Lambert, QC
J4P 2H9

Web.: http://www.prival.ca
Tel.: (450) 761-9973 poste 635
1-866-761-9973
Fax.: (450) 761-9842

Ce message électronique ainsi que tous les documents annexés
s’adressent exclusivement à la personne ou à l’entité
inscrite dans la rubrique destinataire ; il peut contenir des
renseignements de nature confidentielle ou privilégiée aux
termes des lois applicables. Nulle autre personne ne doit y
avoir accès. Si vous n’êtes pas le destinataire convenu,
nous vous avisons par la présente qu’il est strictement
interdit d’en divulguer le contenu, de le distribuer, le
copier ou l’utiliser. Veuillez aviser l’expéditeur
immédiatement par retour de courrier électronique et
supprimer ce message de votre système. Toute diffusion ou
reproduction de ce document ainsi que tout mesure prise à
l’égard de la présente sont formellement interdites .

Azfhasterisk wrote:

Do you have zaptel installed? If you are not using a card
of any type you
have to have a USB port on the machine and ztdummy running.

Rick

-----Original Message-----
From: [email protected]
[mailto:[email protected]] On
Behalf Of benmack
Sent: Friday, November 24, 2006 11:06 AM
To: [email protected]
Subject: [Amportal-users] That is not a valid conference number

Hi All

Small hitch setting up a conference - whatever I do, the
user always gets
the message “that is not a valid conference number”, after
entering the PIN

If I enter the wrong PIN, it tells me, so it is clearly
associating the call
with the correct conference

Below is what appears on the cli:-

-- Executing Set("SIP/3001-08b2e480", 

“MEETME_ROOMNUM=5”) in new stack

-- Executing GotoIf("SIP/3001-08b2e480", "0?READPIN") 

in new stack

-- Executing Answer("SIP/3001-08b2e480", "") in new stack
-- Executing Wait("SIP/3001-08b2e480", "1") in new stack
-- Executing Read("SIP/3001-08b2e480", 

“PIN|enter-conf-pin-number||”) in

new stack
– Playing ‘enter-conf-pin-number’ (language ‘en’)
– User entered ‘5’
– Executing GotoIf(“SIP/3001-08b2e480”, “1?USER”) in new stack
– Goto (from-internal,5,9)
– Executing Set(“SIP/3001-08b2e480”,
“MEETME_OPTS=ciMs”) in new stack
– Executing Goto(“SIP/3001-08b2e480”, “STARTMEETME|1”)
in new stack
– Goto (from-internal,STARTMEETME,1)
– Executing MeetMe(“SIP/3001-08b2e480”, “5|ciMs|5”) in
new stack
== Parsing ‘/etc/asterisk/meetme.conf’: Found
== Parsing ‘/etc/asterisk/meetme_additional.conf’: Found
– Playing ‘conf-invalid’ (language ‘en’)

Any ideas?

Cheers


Ben



Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net’s Techsay panel and you’ll get the
chance to share your
opinions on IT & business topics through brief surveys -
and earn cash

http://www.techsay.com/default.php?page=join.php&p=sourceforge
&CID=DEVDEV


Amportal-users mailing list
[email protected]
amportal-users List Signup and Options



Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net’s Techsay panel and you’ll get the
chance to share your
opinions on IT & business topics through brief surveys -
and earn cash

http://www.techsay.com/default.php?page=join.php&p=sourceforge
&CID=DEVDEV


Amportal-users mailing list
[email protected]
amportal-users List Signup and Options



Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net’s Techsay panel and you’ll get the
chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge
&CID=DEVDEV


Amportal-users mailing list
[email protected]
amportal-users List Signup and Options

[/quote]

Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net’s Techsay panel and you’ll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV


Amportal-users mailing list
[email protected]

Post generated using Mail2Forum (http://www.mail2forum.com)