SIP ports for local lan sip phones

Hi,

Just to be clear, if I connect multiple SIP phones on my FreePBX system, with FreePBX set to use SIP port 5060, do I leave all SIP phones to use this same port (in the SIP phone setup) - or do I use a different SIP port for each phone, starting at 5060 and incrementing for each SIP phone on my LAN (note non of the phones are on the WAN side, all on the LAN side so just use normal SIP rather than IAX).

Dan

Same port for all phones.

Cheers for the fast reply :smile:

Dan

1 Like