I might be writing on wrong place but I am really desperate on help with my issue.
I set up freepbx on raspberry pi and use USB modem with chan_dongle. I did set up trunk and outbound route however I cannot make a call as it says busy. I have attached log from Asterisk. Many Thanks.
[2014-08-18 22:33:15] VERBOSE[3171][C-00000005] pbx.c: – Executing [s@macro-dialout-trunk:30] Dial(“SIP/205-00000004”, “dongle/dongle0/07743026080,300,”) in new stack
[2014-08-18 22:33:15] VERBOSE[3171][C-00000005] app_dial.c: – Called dongle/dongle0/07743026080
[2014-08-18 22:33:15] VERBOSE[3171][C-00000005] app_dial.c: – Dongle/dongle0-0100000001 is making progress passing it to SIP/205-00000004
[2014-08-18 22:33:18] VERBOSE[3171][C-00000005] app_dial.c: == Everyone is busy/congested at this time (1:1/0/0)
[2014-08-18 22:33:18] VERBOSE[3171][C-00000005] pbx.c: – Executing [s@macro-dialout-trunk:31] NoOp(“SIP/205-00000004”, “Dial failed for some reason with DIALSTATUS = BUSY and HANGUPCAUSE = 17”) in new stack
[2014-08-18 22:33:18] VERBOSE[3171][C-00000005] pbx.c: – Executing [s@macro-dialout-trunk:32] GotoIf(“SIP/205-00000004”, “0?continue,1:s-BUSY,1”) in new stack
[2014-08-18 22:33:18] VERBOSE[3171][C-00000005] pbx.c: – Goto (macro-dialout-trunk,s-BUSY,1)
[2014-08-18 22:33:18] VERBOSE[3171][C-00000005] pbx.c: – Executing [s-BUSY@macro-dialout-trunk:1] NoOp(“SIP/205-00000004”, “Dial failed due to trunk reporting BUSY - giving up”) in new stack
[2014-08-18 22:33:18] VERBOSE[3171][C-00000005] pbx.c: – Executing [s-BUSY@macro-dialout-trunk:2] PlayTones(“SIP/205-00000004”, “busy”) in new stack