FreePBX | Register | Issues | Wiki | Portal | Support

Zend Error when finishing up setup


#1

After following the instructions (http://wiki.freepbx.org/display/PBXM3/Installing+M3+from+a+RPM), using the web GUI we run through the initial setup, I log in with my schoomzecom portal account and enter a deployment ID (and also let it create a new one) and I receive the error

Zend Issue (Error HS1)
The Zend Licence file for this machine is Corrupt!

When loading the Zend Licence File, some required settings were missing.

This may happen when you have multiple Zended products on a single machine. Zend does not allow this

Remove the other Zend Licenced Product, and restart Apache.

The command ‘zend_get_licence’ returned the following information: {“Product-Name”:“M3”,“Hardware-Locked”:“Yes”,“Registered-To”:“M3 - Test”,“Multitenant”:“No”,“Clients”:“0”,“Multiple-Monitoring-Servers”:“No”,“Expires”:“16-Sep-2015”,“Subscription-Expiration”:“1-Jan-2015”,“Timestamp”:“1441802076”,“Produced-By”:“Schmooze Communications”}

Any Suggestions?

Setup:
VM Host: VMWare ESXi 6.0.0
OS: CentOS 6.6 64bit


(Bryan Walters) #2

@digitalb, Can you please ensure your deployment type in the portal is an M3 deployment?


#3

Thank you for the reply, checked and it shows as a M3 deployment and M3 system type.


(Bryan Walters) #4

@digitalb, What is the deployment id you are trying to use?