Hi all,
I have a system asterisknow , and as this is with freepbx maybe I can get some help here.
I have a tdm400p analog card with 3 fxo and 1 fxs.
I want to connect and configure an analog phone to fxs port and make call to and from sip phones…
I add a zap extension but I can not get dial tone… should I configure a trunk before?
Here is some information:
[QUOTE]$lsdahdi
Span 1: WCTDM/4 “Wildcard TDM400P REV I Board 5” (MASTER)
1 FXO FXSKS (SWEC: MG2) RED
2 FXO FXSKS (SWEC: MG2) RED
3 FXO FXSKS (SWEC: MG2) RED
4 FXS FXOKS (SWEC: MG2)
[/QUOTE]
[QUOTE]system.conf
fxsks=1
echocanceller=mg2,1
fxsks=2
echocanceller=mg2,2
fxsks=3
echocanceller=mg2,3
fxoks=4
echocanceller=mg2,4
Global data
loadzone = us
defaultzone = us
[/QUOTE]
[QUOTE]dahdi_channels
;;; line="3 WCTDM/4/2 FXSKS"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 3
callerid=
group=
context=default
;;; line="4 WCTDM/4/3 FXOKS"
signalling=fxo_ks
callerid=“Channel 4” <4004>
mailbox=4004
group=5
context=from-internal
channel => 4
callerid=
mailbox=
group=
context=default
[/QUOTE]
[QUOTE]chan_dahdi_additional.conf
;;;;;;[500]
signalling=fxo_ks
pickupgroup=
mailbox=500@device
immediate=no
echotraining=800
echocancelwhenbridged=no
echocancel=yes
context=from-internal
callprogress=no
callgroup=
callerid=device <500>
busydetect=no
busycount=7
accountcode=
channel=>4
[/QUOTE]
[QUOTE]dahdi_cfg -vv
DAHDI Tools Version - 2.3.0
DAHDI Version: 2.3.0.1
Echo Canceller(s): MG2
Configuration
Channel map:
Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 03)
Channel 04: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04)
4 channels to configure.
Setting echocan for channel 1 to mg2
Setting echocan for channel 2 to mg2
Setting echocan for channel 3 to mg2
Setting echocan for channel 4 to mg2
[/QUOTE]
[QUOTE]
dmesg
Module 3: Installed – AUTO FXS/DPO
Found a Wildcard TD