Vega 60 to Free PBX No CID

I have a configuration problem with my Vega 60g to freepbx.

When the Vega gets an incoming call from the PSTN the caller id that shows up is just the trunk name “Vega” in this case. The inbound route directs to a ring group. The phones ring once then stop for two seconds then ring again.

I’m lost.

Incoming SIP Trunk Settings

username=vega
type=peer
trustrpid=yes
sendrpid=yes
secret=XXXXXXXX
qualify=yes
insecure=very
host=176.16.0.69
dtmfmode=rfc2833
disallow=all
context=from-trunk
allow=ulaw

What kind of lines are coming into the Vega, and what country is this in?

Also, there may be some caller id settings on the vega worth looking into, as mentioned by stewart1 in this post:

You may also want to try contacting support if your device is still covered in case there are some typical Vega setups they are more familiar with dealing.

This topic was automatically closed 31 days after the last reply. New replies are no longer allowed.