Using EPM module to reboot GrandStream phones

Hello,

I use the endpoint manager for a customer.
When i modify the files in endpoint manager, the phones (GrandStream GXV 3240) need a reboot to take the modification.
I would like to reboot every phones at the same time.
Is-it possible to make that and how ?

Best regards,
Luca

Save rebuild and update phones, should reboot it.
Do it from the template.

Hello,

When I do this, there is no reboot.
I have ± 30 GrandStream phones and no one reboot.

Best regards,
Luca

Check back through the archives - there was some discussion about rebooting Grandstream phones when a config change is made. IIRC, there’s a setting where the phone will only reboot if there are changes to the config, but that might be “setting dependent”.

Okay, thanks
I will check :slight_smile:

hi, i had this problem with grandstream, this is the pcode you need

# Disable SIP NOTIFY Authentication. 0 - No, 1 - Yes. Default is 0 Number: 0,1 Mandatory
P4428 = 1

This topic was automatically closed 365 days after the last reply. New replies are no longer allowed.