Upgrade to 1.89.210.57

Distro Discussion & Help
1

Hi,

I just did an upgrade to 1.89.210.57 on 2 systems. Both had the stock installation of 1.88.210.57. All went good, the system is working fine but I get the following error at FreePBX System Status.

[code]Could not run admin script.

Exit code was 127 and output was:

found language dir fr for directory, not installed on system, skipping
Added to globals: ASTETCDIR = /etc/asterisk
Added to globals: ASTMODDIR = /usr/lib/asterisk/modules
Added to globals: ASTVARLIBDIR = /var/lib/asterisk
Added to globals: ASTAGIDIR = /var/lib/asterisk/agi-bin
Added to globals: ASTSPOOLDIR = /var/spool/asterisk
Added to globals: ASTRUNDIR = /var/run/asterisk
Added to globals: ASTLOGDIR = /var/log/asterisk
Added to globals: CWINUSEBUSY = true
Added to globals: AMPMGRUSER = ********
Added to globals: AMPMGRPASS = **********
Added to globals: AMPDBENGINE = mysql
Added to globals: AMPDBHOST = localhost
Added to globals: AMPDBNAME = ***********
Added to globals: AMPDBUSER = ***********
Added to globals: AMPDBPASS = ************
Added to globals: VMX_CONTEXT = from-internal
Added to globals: VMX_PRI = 1
Added to globals: VMX_TIMEDEST_CONTEXT =
Added to globals: VMX_TIMEDEST_EXT = dovm
Added to globals: VMX_TIMEDEST_PRI = 1
Added to globals: VMX_LOOPDEST_CONTEXT =
Added to globals: VMX_LOOPDEST_EXT = dovm
Added to globals: VMX_LOOPDEST_PRI = 1
Added to globals: MIXMON_DIR =
Added to globals: MIXMON_POST =
Please update your modules and reload Asterisk by browsing to your server.
Added 6 seconds ago
(freepbx.reload_post_script)[/code]

And the following:

[code]Exit code was 127 and output was:

Could not run admin script.

Added 3 minutes ago
(freepbx.reload_pre_script)[/code]

Why do I get these messages?

2

try upgrading framework and see if that goes away.

Just fixed a typo that could make that happen though not clear why it wasn’t happening on the test system with the same typo. (It should have happened ? )

3

The version of the framework was 2.10.0rc1.5. I did a force download and install and I still get these 2 error messages.

Regards

4

oops … looks like the module version of framework didn’t get bumped, pull it down again and if still failing then let us know if you have anything set in Advanced Settings under the PRE_RELOAD/POST_RELOAD Scripts.

5

Its fine now :slight_smile: No error messages