Unable to make outbound calls

Hello guys,

First of all I want to take you all in advance for any kind of help you’ll offer.
Second I’ve been trying to solve this issue for about 3 weeks now tried every forum that I could find but I found nothing in order to help me.

So, I’ve installed FreePbx on a Pi3, I’m using an USB dongle as the main trunk, I’ve set up 3 cisco 7960 phone in SIP mode.

I can make inbound calls, I can make calls between phones but when I try to make an outside call I only get busy tone.

In the asterisk logs I get the following:

[2017-02-07 20:52:31] VERBOSE[2245][C-00000001] pbx.c: Executing [[email protected]:8] Hangup(“SIP/100-00000001”, “”) in new stack
[2017-02-07 20:52:31] VERBOSE[2245][C-00000001] pbx.c: Spawn extension (from-internal, 90766253176, 8) exited non-zero on ‘SIP/100-00000001’
[2017-02-07 20:52:31] VERBOSE[2245][C-00000001] pbx.c: Executing [[email protected]:1] Macro(“SIP/100-00000001”, “hangupcall”) in new stack
[2017-02-07 20:52:31] VERBOSE[2245][C-00000001] pbx.c: Executing [[email protected]:1] GotoIf(“SIP/100-00000001”, “1?theend”) in new stack
[2017-02-07 20:52:31] VERBOSE[2245][C-00000001] pbx_builtins.c: Goto (macro-hangupcall,s,3)
[2017-02-07 20:52:31] VERBOSE[2245][C-00000001] pbx.c: Executing [[email protected]:3] ExecIf(“SIP/100-00000001”, “0?Set(CDR(recordingfile)=)”) in new stack
[2017-02-07 20:52:31] VERBOSE[2245][C-00000001] pbx.c: Executing [[email protected]:4] Hangup(“SIP/100-00000001”, “”) in new stack
[2017-02-07 20:52:31] VERBOSE[2245][C-00000001] app_macro.c: Spawn extension (macro-hangupcall, s, 4) exited non-zero on ‘SIP/100-00000001’ in macro ‘hangupcall’
[2017-02-07 20:52:31] VERBOSE[2245][C-00000001] pbx.c: Spawn extension (from-internal, h, 1) exited non-zero on ‘SIP/100-00000001’
[2017-02-07 21:10:07] VERBOSE[2002][C-00000002] netsock2.c: Using SIP RTP TOS bits 184
[2017-02-07 21:10:07] VERBOSE[2002][C-00000002] netsock2.c: Using SIP RTP CoS mark 5
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:1] Macro(“SIP/100-00000002”, “user-callerid,LIMIT,EXTERNAL,”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:1] Set(“SIP/100-00000002”, “TOUCH_MONITOR=1486494607.3”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:2] Set(“SIP/100-00000002”, “AMPUSER=100”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:3] GotoIf(“SIP/100-00000002”, “0?report”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:4] ExecIf(“SIP/100-00000002”, “1?Set(REALCALLERIDNUM=100)”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:5] Set(“SIP/100-00000002”, “AMPUSER=100”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:6] GotoIf(“SIP/100-00000002”, “0?limit”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:7] Set(“SIP/100-00000002”, “AMPUSERCIDNAME=Bro”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:8] GotoIf(“SIP/100-00000002”, “0?report”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:9] Set(“SIP/100-00000002”, “AMPUSERCID=100”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:10] Set(“SIP/100-00000002”, “__DIAL_OPTIONS=Ttr”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:11] Set(“SIP/100-00000002”, “CALLERID(all)=“Bro” <100>”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:12] GotoIf(“SIP/100-00000002”, “0?limit”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:13] ExecIf(“SIP/100-00000002”, “1?Set(GROUP(concurrency_limit)=100)”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:14] GotoIf(“SIP/100-00000002”, “1?continue”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx_builtins.c: Goto (macro-user-callerid,s,27)
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:27] Set(“SIP/100-00000002”, “CALLERID(number)=100”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:28] Set(“SIP/100-00000002”, “CALLERID(name)=Bro”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:29] GotoIf(“SIP/100-00000002”, “0?cnum”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:30] Set(“SIP/100-00000002”, “CDR(cnam)=Bro”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:31] Set(“SIP/100-00000002”, “CDR(cnum)=100”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:32] Set(“SIP/100-00000002”, “CHANNEL(language)=en”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:2] Gosub(“SIP/100-00000002”, “sub-record-check,s,1(out,90766253176,no)”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:1] GotoIf(“SIP/100-00000002”, “0?initialized”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:2] Set(“SIP/100-00000002”, “__REC_STATUS=INITIALIZED”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:3] Set(“SIP/100-00000002”, “NOW=1486494607”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:4] Set(“SIP/100-00000002”, “__DAY=07”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:5] Set(“SIP/100-00000002”, “__MONTH=02”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:6] Set(“SIP/100-00000002”, “__YEAR=2017”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:7] Set(“SIP/100-00000002”, “__TIMESTR=20170207-211007”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:8] Set(“SIP/100-00000002”, “__FROMEXTEN=100”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:9] Set(“SIP/100-00000002”, “__MON_FMT=wav”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:10] NoOp(“SIP/100-00000002”, “Recordings initialized”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:11] ExecIf(“SIP/100-00000002”, “0?Set(ARG3=dontcare)”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:12] Set(“SIP/100-00000002”, “REC_POLICY_MODE_SAVE=”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:13] ExecIf(“SIP/100-00000002”, “0?Set(REC_STATUS=NO)”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:14] GotoIf(“SIP/100-00000002”, “3?checkaction”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx_builtins.c: Goto (sub-record-check,s,17)
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:17] GotoIf(“SIP/100-00000002”, “1?sub-record-check,out,1”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx_builtins.c: Goto (sub-record-check,out,1)
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:1] NoOp(“SIP/100-00000002”, “Outbound Recording Check from 100 to 90766253176”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:2] Set(“SIP/100-00000002”, “RECMODE=dontcare”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:3] ExecIf(“SIP/100-00000002”, “1?Goto(routewins)”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx_builtins.c: Goto (sub-record-check,out,7)
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:7] Gosub(“SIP/100-00000002”, “recordcheck,1(no,out,90766253176)”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:1] NoOp(“SIP/100-00000002”, “Starting recording check against no”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:2] Goto(“SIP/100-00000002”, “no”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx_builtins.c: Goto (sub-record-check,recordcheck,12)
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:12] Set(“SIP/100-00000002”, “__REC_POLICY_MODE=NO”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:13] Return(“SIP/100-00000002”, “”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:8] Return(“SIP/100-00000002”, “”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:3] Set(“SIP/100-00000002”, “MOHCLASS=default”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:4] ExecIf(“SIP/100-00000002”, “1?Set(TRUNKCIDOVERRIDE=GSCMedia <+40752222880>)”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:5] Set(“SIP/100-00000002”, “_NODEST=”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:6] Macro(“SIP/100-00000002”, “dialout-trunk,3,0766253176,off”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:1] Set(“SIP/100-00000002”, “DIAL_TRUNK=3”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:2] GosubIf(“SIP/100-00000002”, “0?sub-pincheck,s,1()”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:3] GotoIf(“SIP/100-00000002”, “0?disabletrunk,1”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:4] Set(“SIP/100-00000002”, “DIAL_NUMBER=0766253176”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:5] Set(“SIP/100-00000002”, “DIAL_TRUNK_OPTIONS=Ttr”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:6] Set(“SIP/100-00000002”, “OUTBOUND_GROUP=OUT_3”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:7] GotoIf(“SIP/100-00000002”, “1?nomax”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx_builtins.c: Goto (macro-dialout-trunk,s,9)
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:9] GotoIf(“SIP/100-00000002”, “0?skipoutcid”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:10] Set(“SIP/100-00000002”, “DIAL_TRUNK_OPTIONS=Tt”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:11] Macro(“SIP/100-00000002”, “outbound-callerid,3”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:1] ExecIf(“SIP/100-00000002”, “0?Set(CALLERPRES(name-pres)=)”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:2] ExecIf(“SIP/100-00000002”, “0?Set(CALLERPRES(num-pres)=)”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:3] ExecIf(“SIP/100-00000002”, “0?Set(REALCALLERIDNUM=100)”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:4] GotoIf(“SIP/100-00000002”, “1?normcid”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx_builtins.c: Goto (macro-outbound-callerid,s,7)
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:7] Set(“SIP/100-00000002”, “USEROUTCID=+40752222880”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:8] Set(“SIP/100-00000002”, “EMERGENCYCID=”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:9] Set(“SIP/100-00000002”, “TRUNKOUTCID=“test” <+40752222880>”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:10] GotoIf(“SIP/100-00000002”, “1?trunkcid”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx_builtins.c: Goto (macro-outbound-callerid,s,15)
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:15] ExecIf(“SIP/100-00000002”, “1?Set(CALLERID(all)=“test” <+40752222880>)”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:16] ExecIf(“SIP/100-00000002”, “1?Set(CALLERID(all)=+40752222880)”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:17] ExecIf(“SIP/100-00000002”, “1?Set(CALLERID(all)=GSCMedia <+40752222880>)”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:18] ExecIf(“SIP/100-00000002”, “0?Set(CALLERPRES(name-pres)=prohib_passed_screen)”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:19] ExecIf(“SIP/100-00000002”, “0?Set(CALLERPRES(num-pres)=prohib_passed_screen)”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:20] Set(“SIP/100-00000002”, “CDR(outbound_cnum)=+40752222880”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:21] Set(“SIP/100-00000002”, “CDR(outbound_cnam)=GSCMedia”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:12] GosubIf(“SIP/100-00000002”, “1?sub-flp-3,s,1()”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:1] ExecIf(“SIP/100-00000002”, “1?Return()”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:13] Set(“SIP/100-00000002”, “OUTNUM=90766253176”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:14] Set(“SIP/100-00000002”, “custom=AMP”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:15] ExecIf(“SIP/100-00000002”, “0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default)Tt)”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:16] ExecIf(“SIP/100-00000002”, “0?Set(DIAL_TRUNK_OPTIONS=TtM(confirm))”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:17] Macro(“SIP/100-00000002”, “dialout-trunk-predial-hook,”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:1] GotoIf(“SIP/100-00000002”, “1?skip”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx_builtins.c: Goto (macro-dialout-trunk-predial-hook,s,3)
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:3] MacroExit(“SIP/100-00000002”, “”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:18] GotoIf(“SIP/100-00000002”, “0?bypass,1”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:19] ExecIf(“SIP/100-00000002”, “1?Set(CONNECTEDLINE(num,i)=0766253176)”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:20] ExecIf(“SIP/100-00000002”, “1?Set(CONNECTEDLINE(name,i)=CID:+40752222880)”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:21] ExecIf(“SIP/100-00000002”, “0?Set(CONNECTEDLINE(name,i)=CID:(Hidden)+40752222880)”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:22] GotoIf(“SIP/100-00000002”, “1?customtrunk”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx_builtins.c: Goto (macro-dialout-trunk,s,26)
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:26] Set(“SIP/100-00000002”, “pre_num=AMP:dongle/dongle0/”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:27] Set(“SIP/100-00000002”, “the_num=OUTNUM”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:28] Set(“SIP/100-00000002”, “post_num=”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:29] GotoIf(“SIP/100-00000002”, “1?outnum:skipoutnum”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx_builtins.c: Goto (macro-dialout-trunk,s,30)
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:30] Set(“SIP/100-00000002”, “the_num=90766253176”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:31] Dial(“SIP/100-00000002”, “dongle/dongle0/90766253176,300,Tt”) in new stack
[2017-02-07 21:10:07] WARNING[2996][C-00000002] channel.c: [dongle0] Request to call on device which can not make call at this moment
[2017-02-07 21:10:07] WARNING[2996][C-00000002] app_dial.c: Unable to create channel of type ‘dongle’ (cause 44 - Requested channel not available)
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] app_dial.c: Everyone is busy/congested at this time (1:0/0/1)
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:32] NoOp(“SIP/100-00000002”, “Dial failed for some reason with DIALSTATUS = CHANUNAVAIL and HANGUPCAUSE = 44”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:33] GotoIf(“SIP/100-00000002”, “0?continue,1:s-CHANUNAVAIL,1”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx_builtins.c: Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:1] Set(“SIP/100-00000002”, “RC=44”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:2] Goto(“SIP/100-00000002”, “44,1”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx_builtins.c: Goto (macro-dialout-trunk,44,1)
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:1] Goto(“SIP/100-00000002”, “continue,1”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx_builtins.c: Goto (macro-dialout-trunk,continue,1)
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:1] NoOp(“SIP/100-00000002”, “TRUNK Dial failed due to CHANUNAVAIL HANGUPCAUSE: 44 - failing through to other trunks”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:2] ExecIf(“SIP/100-00000002”, “1?Set(CALLERID(number)=100)”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]ernal:7] Macro(“SIP/100-00000002”, “outisbusy,”) in new stack
[2017-02-07 21:10:07] WARNING[2996][C-00000002] app_macro.c: No such context ‘macro-outisbusy’ for macro ‘outisbusy’. Was called by [email protected]
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:8] Hangup(“SIP/100-00000002”, “”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Spawn extension (from-internal, 90766253176, 8) exited non-zero on ‘SIP/100-00000002’
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:1] Macro(“SIP/100-00000002”, “hangupcall”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:1] GotoIf(“SIP/100-00000002”, “1?theend”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx_builtins.c: Goto (macro-hangupcall,s,3)
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:3] ExecIf(“SIP/100-00000002”, “0?Set(CDR(recordingfile)=)”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Executing [[email protected]:4] Hangup(“SIP/100-00000002”, “”) in new stack
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] app_macro.c: Spawn extension (macro-hangupcall, s, 4) exited non-zero on ‘SIP/100-00000002’ in macro ‘hangupcall’
[2017-02-07 21:10:07] VERBOSE[2996][C-00000002] pbx.c: Spawn extension (from-internal, h, 1) exited non-zero on ‘SIP/100-00000002’
[2017-02-07 21:12:02] VERBOSE[1924] asterisk.c: Remote UNIX connection
[2017-02-07 21:12:02] VERBOSE[3108] asterisk.c: Remote UNIX connection disconnected
[2017-02-07 21:12:02] VERBOSE[1924] asterisk.c: Remote UNIX connection
[2017-02-07 21:12:02] VERBOSE[3111] asterisk.c: Remote UNIX connection disconnected

You saw this part, right?

Yes, really new at this, tried to read all documentation, but don’t exactly know what it refers to, I first taught it’s an issues with the dongle, tried with 3 different models same result.

Your interface to make calls on is a “dongle”. Not sure how that’s going to work, but the error means that, for whatever reason, the dongle is not ready to send calls out. Couldn’t tell you why, but if you tried three different “dongles” (what kind of dongle or what it’s supposed to do must not be important) then the problem is in your configuration.

Normally, I don’t like to get involved with RasPBX questions since the platform is so unreliable (the SD card can corrupt without warning and fail) but I thought this might be a different case.

The problem is either your dongle configuration or in the interface from the dongle to whatever it’s supposed to connect to.