Unable to make outbound calls

dear all ,

i have install the asterisk now to my pc at home , the problem is when iam tying to make outbound calls the x-ten give follow error 403 forbidden . kindly check follow sip conf

Global Settings:

UDP Bindaddress: 0.0.0.0:5060
TCP SIP Bindaddress: Disabled
TLS SIP Bindaddress: Disabled
Videosupport: No
Textsupport: No
Ignore SDP sess. ver.: No
AutoCreate Peer: No
Match Auth Username: No
Allow unknown access: No
Allow subscriptions: Yes
Allow overlap dialing: Yes
Allow promisc. redir: No
Enable call counters: No
SIP domain support: No
Realm. auth: No
Our auth realm asterisk
Use domains as realms: No
Call to non-local dom.: Yes
URI user is phone no: No
Always auth rejects: Yes
Direct RTP setup: No
User Agent: FPBX-2.10.1(1.8.11)
SDP Session Name: Asterisk PBX 1.8.11-cert9
SDP Owner Name: root
Reg. context: (not set)
Regexten on Qualify: No
Legacy userfield parse: No
Caller ID: Unknown
From: Domain:
Record SIP history: Off
Call Events: On
Auth. Failure Events: Off
T.38 support: No
T.38 EC mode: Unknown
T.38 MaxDtgrm: -1
SIP realtime: Disabled
Qualify Freq : 60000 ms
Q.850 Reason header: No
Store SIP_CAUSE: No

Network QoS Settings:

IP ToS SIP: CS3
IP ToS RTP audio: EF
IP ToS RTP video: AF41
IP ToS RTP text: CS0
802.1p CoS SIP: 4
802.1p CoS RTP audio: 5
802.1p CoS RTP video: 6
802.1p CoS RTP text: 5
Jitterbuffer enabled: No

Network Settings:

SIP address remapping: Enabled using externaddr
Externhost:
Externaddr: 37.8.101.97:0
Externrefresh: 10
Localnet: 192.168.1.0/255.255.255.0

Global Signalling Settings:

Codecs: 0xe (gsm|ulaw|alaw)
Codec Order: ulaw:20,alaw:20,gsm:20
Relax DTMF: No
RFC2833 Compensation: No
Symmetric RTP: Yes
Compact SIP headers: No
RTP Keepalive: 0 (Disabled)
RTP Timeout: 30
RTP Hold Timeout: 300
MWI NOTIFY mime type: application/simple-message-summary
DNS SRV lookup: No
Pedantic SIP support: Yes
Reg. min duration 60 secs
Reg. max duration: 3600 secs
Reg. default duration: 120 secs
Outbound reg. timeout: 20 secs
Outbound reg. attempts: 0
Notify ringing state: Yes
Include CID: No
Notify hold state: Yes
SIP Transfer mode: open
Max Call Bitrate: 384 kbps
Auto-Framing: No
Outb. proxy:
Session Timers: Accept
Session Refresher: uas
Session Expires: 1800 secs
Session Min-SE: 90 secs
Timer T1: 500
Timer T1 minimum: 100
Timer B: 32000
No premature media: Yes
Max forwards: 70

Default Settings:

Allowed transports: UDP
Outbound transport: UDP
Context: from-sip-external
Force rport: Yes
DTMF: rfc2833
Qualify: 0
Use ClientCode: No
Progress inband: Never
Language:
MOH Interpret: default
MOH Suggest:
Voice Mail Extension: asterisk

If you are not too far into this install you would be better off dropping AsteriskNow and loading a real FreePBX distro. AsteriskNow is not the best FreePBX based system so you might as well move off of it now.