Machine has been up and running for many months problem free. Today we are not able to make outbound calls. The error seems to be:
TRUNK Dial failed due to CONGESTION
Looking at call calls, last outbound call was at 6:37 PM PST the day before - from my knowledge nothing was changed on the box. I’ve reset it, reloaded genzaptelconf, no avail.
My setup - PBX in a Flash 1.3, Asterisk 1.4.21.2, Zaptel 1.4.11, FreePBX 2.5.1.2
I don’t know where else to look. Here is a little snip of the log:
-- SIP/flowroute-139f0aa0 is circuit-busy
== Everyone is busy/congested at this time (1:0/1/0)
– Executing [[email protected]:20] [1;36;40mGoto [0;37;40m(" [1;35;40mSIP/502-c400ec30 [0;37;40m", " [1;35;40ms-CONGESTION|1 [0;37;40m") in new stack
– Goto (macro-dialout-trunk,s-CONGESTION,1)
– Executing [[email protected]:1] [1;36;40mGotoIf [0;37;40m(" [1;35;40mSIP/502-c400ec30 [0;37;40m", " [1;35;40m1?noreport [0;37;40m") in new stack
[KasteriskCLI> – Goto (macro-dialout-trunk,s-CONGESTION,3)
[KasteriskCLI> – Executing [[email protected]:3] [1;36;40mNoOp [0;37;40m(" [1;35;40mSIP/502-c400ec30 [0;37;40m", " [1;35;40mTRUNK Dial failed due to CONGESTION - failing through to other trunks [0;37;40m") in new stack
[KasteriskCLI> – Executing [[email protected]:5] [1;36;40mMacro [0;37;40m(" [1;35;40mSIP/502-c400ec30 [0;37;40m", " [1;35;40moutisbusy| [0;37;40m") in new stack
[KasteriskCLI> – Executing [[email protected]:1] [1;36;40mPlayback [0;37;40m(" [1;35;40mSIP/502-c400ec30 [0;37;40m", " [1;35;40mall-circuits-busy-now|noanswer [0;37;40m") in new stack
[Kasterisk*CLI> – <SIP/502-c400ec30> Playing ‘all-circuits-busy-now’ (language ‘en’)