TRUNK Dial failed due to CHANUNAVAIL

After Few Calls this error comes up i am stuck with it from last two weeks.

can anyone help !?

[2012-11-06 16:59:20] VERBOSE[6260] netsock2.c: == Using SIP RTP TOS bits 184
[2012-11-06 16:59:20] VERBOSE[6260] netsock2.c: == Using SIP RTP CoS mark 5
[2012-11-06 16:59:20] VERBOSE[6260] app_dial.c: – Called SIP/AwanTel/00442082045637
[2012-11-06 16:59:32] VERBOSE[6260] app_dial.c: == Everyone is busy/congested at this time (1:0/0/1)
[2012-11-06 16:59:32] VERBOSE[6260] pbx.c: – Executing [[email protected]:23] NoOp(“SIP/1104-000001c3”, “Dial failed for some reason with DIALSTATUS = CHANUNAVAIL and HANGUPCAUSE = 1”) in new stack
[2012-11-06 16:59:32] VERBOSE[6260] pbx.c: – Executing [[email protected]unk:24] Goto(“SIP/1104-000001c3”, “s-CHANUNAVAIL,1”) in new stack
[2012-11-06 16:59:32] VERBOSE[6260] pbx.c: – Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
[2012-11-06 16:59:32] VERBOSE[6260] pbx.c: – Executing [[email protected]:1] Set(“SIP/1104-000001c3”, “RC=1”) in new stack
[2012-11-06 16:59:32] VERBOSE[6260] pbx.c: – Executing [[email protected]:2] Goto(“SIP/1104-000001c3”, “1,1”) in new stack
[2012-11-06 16:59:32] VERBOSE[6260] pbx.c: – Goto (macro-dialout-trunk,1,1)
[2012-11-06 16:59:32] VERBOSE[6260] pbx.c: – Executing [[email protected]:1] Goto(“SIP/1104-000001c3”, “continue,1”) in new stack
[2012-11-06 16:59:32] VERBOSE[6260] pbx.c: – Goto (macro-dialout-trunk,continue,1)
[2012-11-06 16:59:32] VERBOSE[6260] pbx.c: – Executing [[email protected]:1] GotoIf(“SIP/1104-000001c3”, “1?noreport”) in new stack
[2012-11-06 16:59:32] VERBOSE[6260] pbx.c: – Goto (macro-dialout-trunk,continue,3)
[2012-11-06 16:59:32] VERBOSE[6260] pbx.c: – Executing [[email protected]:3] NoOp(“SIP/1104-000001c3”, “TRUNK Dial failed due to CHANUNAVAIL HANGUPCAUSE: 1 - failing through to other trunks”) in new stack
[2012-11-06 16:59:32] VERBOSE[6260] pbx.c: – Executing [[email protected]:4] Set(“SIP/1104-000001c3”, “CALLERID(number)=1104”) in new stack
[2012-11-06 16:59:32] VERBOSE[6260] pbx.c: – Executing [[email protected]:6] Macro(“SIP/1104-000001c3”, “outisbusy,”) in new stack
[2012-11-06 16:59:32] VERBOSE[6260] pbx.c: – Executing [[email protected]:1] Progress(“SIP/1104-000001c3”, “”) in new stack
[2012-11-06 16:59:32] VERBOSE[6260] pbx.c: – Executing [[email protected]:2] GotoIf(“SIP/1104-000001c3”, “0?emergency,1”) in new stack
[2012-11-06 16:59:32] VERBOSE[6260] pbx.c: – Executing [[email protected]:3] GotoIf(“SIP/1104-000001c3”, “0?intracompany,1”) in new stack
[2012-11-06 16:59:32] VERBOSE[6260] pbx.c: – Executing [[email protected]:4] Playback(“SIP/1104-000001c3”, “all-circuits-busy-now&pls-try-call-later, noanswer”) in new stack
[2012-11-06 16:59:32] VERBOSE[6260] file.c: – <SIP/1104-000001c3> Playing ‘all-circuits-busy-now.ulaw’ (language ‘en’)
[2012-11-06 16:59:34] VERBOSE[6260] file.c: – <SIP/1104-000001c3> Playing ‘pls-try-call-later.ulaw’ (language ‘en’)
[2012-11-06 16:59:36] VERBOSE[6258] app_dial.c: – SIP/AwanTel-000001c2 answered SIP/1107-000001c1
[2012-11-06 16:59:36] VERBOSE[6260] app_macro.c: == Spawn extension (macro-outisbusy, s, 4) exited non-zero on ‘SIP/1104-000001c3’ in macro ‘outisbusy’
[2012-11-06 16:59:36] VERBOSE[6260] pbx.c: == Spawn extension (from-internal, 02082045637, 6) exited non-zero on ‘SIP/1104-000001c3’
[2012-11-06 16:59:36] VERBOSE[6260] pbx.c: – Executing [[email protected]:1] Hangup(“SIP/1104-000001c3”, “”) in new stack
[2012-11-06 16:59:36] VERBOSE[6260] pbx.c: == Spawn extension (from-internal, h, 1) exited non-zero on ‘SIP/1104-000001c3’
[2012-11-06 16:59:36] VERBOSE[6261] app_mixmonitor.c: == MixMonitor close filestream
[2012-11-06 16:59:36] VERBOSE[6261] app_mixmonitor.c: == End MixMonitor Recording SIP/1104-000001c3
[2012-11-06 16:59:37] VERBOSE[3623] netsock2.c: == Using SIP RTP TOS bits 184
[2012-11-06 16:59:37] VERBOSE[3623] netsock2.c: == Using SIP RTP CoS mark 5
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:1] Macro(“SIP/1104-000001c5”, “user-callerid,LIMIT,”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:1] Set(“SIP/1104-000001c5”, “AMPUSER=1104”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:2] GotoIf(“SIP/1104-000001c5”, “0?report”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:3] ExecIf(“SIP/1104-000001c5”, “1?Set(REALCALLERIDNUM=1104)”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:4] Set(“SIP/1104-000001c5”, “AMPUSER=1104”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:5] Set(“SIP/1104-000001c5”, “AMPUSERCIDNAME=Miss Zoya”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:6] GotoIf(“SIP/1104-000001c5”, “0?report”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:7] Set(“SIP/1104-000001c5”, “AMPUSERCID=1104”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:8] Set(“SIP/1104-000001c5”, “CALLERID(all)=“Miss Zoya” <1104>”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:9] GotoIf(“SIP/1104-000001c5”, “0?limit”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:10] ExecIf(“SIP/1104-000001c5”, “1?Set(GROUP(concurrency_limit)=1104)”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:11] GosubIf(“SIP/1104-000001c5”, “7?sub-ccss,s,1(from-internal,02082045637)”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:1] ExecIf(“SIP/1104-000001c5”, “0?Return()”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:2] Set(“SIP/1104-000001c5”, “CCSS_SETUP=TRUE”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:3] GosubIf(“SIP/1104-000001c5”, “0?monitor_config,1(from-internal,02082045637):monitor_default,1(from-internal,02082045637)”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:1] GotoIf(“SIP/1104-000001c5”, “0?is_exten”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:2] StackPop(“SIP/1104-000001c5”, “”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:3] Return(“SIP/1104-000001c5”, “FALSE”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:12] ExecIf(“SIP/1104-000001c5”, “0?Set(CHANNEL(language)=)”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:13] GotoIf(“SIP/1104-000001c5”, “1?continue”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Goto (macro-user-callerid,s,26)
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:26] Set(“SIP/1104-000001c5”, “CALLERID(number)=1104”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:27] Set(“SIP/1104-000001c5”, “CALLERID(name)=Miss Zoya”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:28] Set(“SIP/1104-000001c5”, “CHANNEL(language)=en”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:2] Set(“SIP/1104-000001c5”, “MOHCLASS=default”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:3] Set(“SIP/1104-000001c5”, “_NODEST=”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:4] Gosub(“SIP/1104-000001c5”, “sub-record-check,s,1(out,02082045637,)”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:1] GotoIf(“SIP/1104-000001c5”, “1?check”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Goto (sub-record-check,s,6)
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:6] Set(“SIP/1104-000001c5”, “__MON_FMT=wav”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]ub-record-check:7] GotoIf(“SIP/1104-000001c5”, “1?next”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Goto (sub-record-check,s,10)
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:10] ExecIf(“SIP/1104-000001c5”, “0?Return()”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:11] GotoIf(“SIP/1104-000001c5”, “0?out,1”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:12] Set(“SIP/1104-000001c5”, “__REC_STATUS=INITIALIZED”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:13] ExecIf(“SIP/1104-000001c5”, “0?Set(__REC_POLICY_MODE=)”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:14] Set(“SIP/1104-000001c5”, “NOW=1352203177”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:15] Set(“SIP/1104-000001c5”, “__DAY=06”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:16] Set(“SIP/1104-000001c5”, “__MONTH=11”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:17] Set(“SIP/1104-000001c5”, “__YEAR=2012”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:18] Set(“SIP/1104-000001c5”, “__TIMESTR=20121106-165937”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:19] Set(“SIP/1104-000001c5”, “__FROMEXTEN=1104”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:20] Set(“SIP/1104-000001c5”, “__CALLFILENAME=out-02082045637-1104-20121106-165937-1352203177.453”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:21] Goto(“SIP/1104-000001c5”, “out,1”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Goto (sub-record-check,out,1)
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:1] ExecIf(“SIP/1104-000001c5”, “1?Set(__REC_POLICY_MODE=always)”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:2] GosubIf(“SIP/1104-000001c5”, “1?record,1(exten,02082045637,1104)”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:1] Set(“SIP/1104-000001c5”, “AUDIOHOOK_INHERIT(MixMonitor)=yes”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:2] MixMonitor(“SIP/1104-000001c5”, “2012/11/06/out-02082045637-1104-20121106-165937-1352203177.453.wav,”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:3] Set(“SIP/1104-000001c5”, “__REC_STATUS=RECORDING”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:4] Set(“SIP/1104-000001c5”, “CDR(recordingfile)=out-02082045637-1104-20121106-165937-1352203177.453.wav”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:5] Return(“SIP/1104-000001c5”, “”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:3] Return(“SIP/1104-000001c5”, “”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:5] Macro(“SIP/1104-000001c5”, “dialout-trunk,2,00442082045637,”) in new stack
[2012-11-06 16:59:37] VERBOSE[6270] app_mixmonitor.c: == Begin MixMonitor Recording SIP/1104-000001c5
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:1] Set(“SIP/1104-000001c5”, “DIAL_TRUNK=2”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:2] GosubIf(“SIP/1104-000001c5”, “0?sub-pincheck,s,1()”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:3] GotoIf(“SIP/1104-000001c5”, “0?disabletrunk,1”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:4] Set(“SIP/1104-000001c5”, “DIAL_NUMBER=00442082045637”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:5] Set(“SIP/1104-000001c5”, “DIAL_TRUNK_OPTIONS=tr”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:6] Set(“SIP/1104-000001c5”, “OUTBOUND_GROUP=OUT_2”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:7] GotoIf(“SIP/1104-000001c5”, “1?nomax”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Goto (macro-dialout-trunk,s,9)
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:9] GotoIf(“SIP/1104-000001c5”, “0?skipoutcid”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:10] Set(“SIP/1104-000001c5”, “DIAL_TRUNK_OPTIONS=”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:11] Macro(“SIP/1104-000001c5”, “outbound-callerid,2”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:1] ExecIf(“SIP/1104-000001c5”, “0?Set(CALLERPRES()=)”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:2] ExecIf(“SIP/1104-000001c5”, “0?Set(REALCALLERIDNUM=1104)”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:3] GotoIf(“SIP/1104-000001c5”, “1?normcid”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Goto (macro-outbound-callerid,s,6)
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:6] Set(“SIP/1104-000001c5”, “USEROUTCID=04”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:7] Set(“SIP/1104-000001c5”, “EMERGENCYCID=”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:8] Set(“SIP/1104-000001c5”, “TRUNKOUTCID=”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:9] GotoIf(“SIP/1104-000001c5”, “1?trunkcid”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Goto (macro-outbound-callerid,s,12)
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:12] ExecIf(“SIP/1104-000001c5”, “0?Set(CALLERID(all)=)”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:13] ExecIf(“SIP/1104-000001c5”, “1?Set(CALLERID(all)=04)”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:14] ExecIf(“SIP/1104-000001c5”, “0?Set(CALLERID(all)=)”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:15] ExecIf(“SIP/1104-000001c5”, “0?Set(CALLERPRES()=prohib_passed_screen)”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:12] GosubIf(“SIP/1104-000001c5”, “1?sub-flp-2,s,1()”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:1] ExecIf(“SIP/1104-000001c5”, “1?Return()”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:13] Set(“SIP/1104-000001c5”, “OUTNUM=00442082045637”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:14] Set(“SIP/1104-000001c5”, “custom=SIP/AwanTel”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:15] ExecIf(“SIP/1104-000001c5”, “0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default))”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:16] ExecIf(“SIP/1104-000001c5”, “0?Set(DIAL_TRUNK_OPTIONS=M(confirm))”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:17] Macro(“SIP/1104-000001c5”, “dialout-trunk-predial-hook,”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:1] MacroExit(“SIP/1104-000001c5”, “”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:18] GotoIf(“SIP/1104-000001c5”, “0?bypass,1”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:19] ExecIf(“SIP/1104-000001c5”, “1?Set(CONNECTEDLINE(num,i)=00442082045637)”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:20] ExecIf(“SIP/1104-000001c5”, “1?Set(CONNECTEDLINE(name,i)=CID:04)”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:21] GotoIf(“SIP/1104-000001c5”, “0?customtrunk”) in new stack
[2012-11-06 16:59:37] VERBOSE[6269] pbx.c: – Executing [[email protected]:22] Dial(“SIP/1104-000001c5”, “SIP/AwanTel/00442082045637,300,”) in new stack/

Fairly straight forward, your trunk to awantel is either misconfigured or they are not accepting your call. The PBX sent them SIP invite to them:

Invite:

app_dial.c: – Called SIP/AwanTel/00442082045637

Answer:

app_dial.c: == Everyone is busy/congested at this time (1:0/0/1)

All the other log is not relevant.

Thanks for update .

i have configured my peer

host=213.221.108.165
username=uum
secret=********** [My Pass]
type=peer

Register String
uum:******@213.221.108.165

is there anything else i should configure !?

is there anything else i should configure !?

How would I know, not familiar with your carrier. That’s not a lot of parameters so they would have to be very insecure for that to work.

They must not be much of a carrier if their registration and call server are the same address. I guess they think DNS is a fad also.

That won’t work for inbound as no context was supplied to send inbound calls to.