after upgrade there is a delay in the tranfer. Using snom phones caller presses transfer dials the extension then press the check key and hangs up. Now if caller does not pause for 2-3 seconds before hanging up they drop the caller being transfered.
Any suggestions on this one?
I am experiencing the same issue on every system I upgrade to 2.7. The log below shows the delay, but it gives no indication as to why it waited so long to complete the transfer.
[Apr 21 11:31:11] VERBOSE[27061] logger.c: – Started music on hold, class ‘default’, on SIP/502-0000007b
[Apr 21 11:31:11] VERBOSE[27061] logger.c: – <SIP/504-0000007c> Playing ‘pbx-transfer’ (language ‘en’)
[Apr 21 11:31:15] VERBOSE[27061] logger.c: – Stopped music on hold on SIP/502-0000007b
[Apr 21 11:31:15] VERBOSE[27061] logger.c: – Started music on hold, class ‘default’, on SIP/502-0000007b
[Apr 21 11:31:15] VERBOSE[27061] logger.c: == Parked SIP/502-0000007b on 71@parkedcalls. Will timeout back to extension [macro-dial] s, 7 in 90 seconds
[Apr 21 11:31:15] VERBOSE[27061] logger.c: – Added extension ‘71’ priority 1 to parkedcalls
[Apr 21 11:31:15] VERBOSE[27061] logger.c: – <SIP/504-0000007c> Playing ‘digits/7’ (language ‘en’)
[Apr 21 11:31:16] VERBOSE[27061] logger.c: – <SIP/504-0000007c> Playing ‘digits/1’ (language ‘en’)
[Apr 21 11:31:17] VERBOSE[27061] logger.c: – Executing [h@macro-dial:1] Macro(“Parked/SIP/502-0000007b”, “hangupcall”) in new stack
hhmmm… I guess we are the only tow having this problem or others don’t think it’s to important.
What version of Asterisk you are using?
There is a issue with transfer with Asterisk prior to version 1.4.30
The version of Asterisk varies slightly from system to system. They are earlier than 1.4.30 though. I will upgrade to the latest 1.4 release and post my results. Thanks for the feedback.