Total Newbie. Fresh Install , FreePBX With ZapMicro A400P Card

FreePBX Installation / Upgrade
1

Hello everybody.

I have a project with a FreePBX i buy a small server, and buy a ZapMicro A400P Card the Equivalent of Digium TDM400 Card with 1 FXO ZapMicro Module for a PSTN Line.

Also i have 3 Granstream Phones

I make the Fres Install the Distro Of Elastix

I dont have any idea from where to start to be able to make phone calls and receive phone calls with this Card.

Is there anybody that can help me.

The Configuration Right now is clean and Clear.

I notice that Elastix Detect my Card but i dont know how to use it with FreePBX configuration.

Once and again, thanks for your time.

2

There are several well written manuals on the web that address all of these questions… The elastix site should have a link or three for them. (have you googled today?)

Phrases to search for “Dummies guide to…”, " … without tears", etc.

It is total possible to use a guide from PBX-in-a-flash, trixbox, etc as they all use the same products. FreePBX, asterisk, etc… just different ISO images with customized tweaks and some options on one are defaults on another.

So something like trixbox without tears 2, dummies guide to trixbox/PBX-in-a-Flash, etc…

3

thank you i am going to continue searching on the internet, the reason why ask here is to ask to the experts but i am going to keep searching.

thank you for the time.

4

7.3 seconds of searching with those words

http://www.elastixconnection.com/downloads/elastix_without_tears.pdf
http://dumbme.mbit.com.au/trixbox/index.htm

Did you even read the first paragraph at www.elastix.org? It has it right there.

5

ok i am sorry, for that.

6

not a problem, We just see a large number of requests for help me setup my system and there is really a ton of stuff on the web already if people just look first. These manuals are very will written and that is why that are 200+ pages. It’s not something we can quickly type in here except to have you go look for it.

7

you are right, thanks for the advice i am going to star read now,.

Thanks.

8

hi guys please give a hand with my zapata file

This is what i got

[trunkgroups]

[channels]
context=from-pstn
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
faxdetect=incoming
echotraining=800
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1

;Uncomment these lines if you have problems with the disconection of your analog lines
;busydetect=yes
;busycount=3

immediate=no

#include zapata_additional.conf
#include zapata-channels.conf

but i cant call o receive calls.

9

and this is the Zapata Aditional Channels.

; Autogenerated by /usr/sbin/genzaptelconf – do not hand edit
; Zaptel Channels Configurations (zapata.conf)
;
; This is not intended to be a complete zapata.conf. Rather, it is intended
; to be #include-d by /etc/zapata.conf that will include the global settings
;

; Span 1: WCTDM/0 “Wildcard TDM400P REV I Board 1” (MASTER)
;;; line="1 WCTDM/0/0 FXSKS (In use)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 1
context=default