I am trying to create a DADHI trunk between a Telesoft Okeford 3000 which interfaces with the PSTN and our FreePBX server, using a Digium wte12xp. The trunk will be used for incoming and outgoing calls.
I have the cables connected and Layer 1 connectivity. But I am unable to make calls and the Okeford is throwing up a Yellow PRI alarm. DAHDI is showing the trunk as OK with no alarms.
Any and all ideas are welcome.
Thanks.
NQ
===================================
Config files are:
system.conf
Span 1: WCT1/0 “Wildcard TE122 Card 0” (MASTER) HDB3/CCS ClockSource
span=1,1,0,ccs,hdb3
termtype: te
bchan=1-15,17-31
dchan=16
echocanceller=mg2,1-15,17-31
Span 2: WCTDM/0 “Wildcard TDM410P Board 1”
fxoks=32
echocanceller=mg2,32
channel 33, WCTDM/0/1, no module.
channel 34, WCTDM/0/2, no module.
fxsks=35
echocanceller=mg2,35
Global data
loadzone = uk
defaultzone = uk
/etc/asterisk/chan_dahdi.conf
[channels]
language=en
; include dahdi extensions defined in FreePBX
#include chan_dahdi_additional.conf
#include chan_dahdi_custom.conf
#include dahdi-channels.conf
; XTDM20B Port #1,2 plugged into PSTN
;AMPLABEL:Channel %c - Button %n
;context=from-pstn
;signalling=fxs_ks
;faxdetect=incoming
;usecallerid=yes
;echocancel=yes
;echocancelwhenbridged=no
;echotraining=800
;group=0
;channel=1-2
dahdi-channels.conf
; Span 1: WCT1/0 “Wildcard TE122 Card 0” (MASTER) HDB3/CCS ClockSource
group=0,11
context=from-pstn
switchtype = euroisdn
signalling = pri_cpe
channel => 1-15,17-31
context = default
group = 63
; Span 2: WCTDM/0 “Wildcard TDM410P Board 1”
; Skip channel=32(FXS) – freepbx option.
;;; line="35 WCTDM/0/3 FXSKS (In use)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 35
callerid=
group=
context=default