TELCO trunks issues

General Help
21

srv002CLI> dahdi show channels
Chan Extension Context Language MOH Interpret Blocked State
pseudo from-internal pt_BR default In Service
1 from-internal pt_BR default In Service
2 from-internal pt_BR default In Service
3 from-internal pt_BR default In Service
4 from-internal pt_BR default In Service
5 from-internal pt_BR default In Service
6 from-zaptel pt_BR default In Service
7 from-zaptel pt_BR default In Service
srv002CLI>

22

I’ve tryed to change from g0 to g9, maybe g0 was referenced by other config files, but it doesn’t work. I still have:

  • Executing [s@macro-dialout-trunk:17] GotoIf(“DAHDI/1-1”, “0?bypass,1”) in new stack
    – Executing [s@macro-dialout-trunk:18] GotoIf(“DAHDI/1-1”, “0?customtrunk”) in new stack
    – Executing [s@macro-dialout-trunk:19] Dial(“DAHDI/1-1”, “DAHDI/g9/86374456,300,twW”) in new stack
    – Called g9/86374456
    – DAHDI/2-1 is ringing
    – DAHDI/2-1 is ringing
    – DAHDI/2-1 is ringing
    – DAHDI/2-1 is ringing
    – Hungup ‘DAHDI/2-1’

Thanks a lot guys…

best regards,

Leandro

23

Make sure all of your channels are consistent group 0 in /etc/asterisk/dahdi-channels.conf

Make sure you reload Asterisk after making the change.

24

Span 1: OPVXA1200/12 “OpenVox A1200P/A800P Board 13” (MASTER)
;;; line="1 OPVXA1200/12/0 FXOKS (In use) (SWEC: MG2)"
signalling=fxo_ks
callerid=“Channel 1” <4001>
mailbox=4001
group=5
context=from-internal
channel => 1
callerid=
mailbox=
group=
context=default

;;; line="2 OPVXA1200/12/1 FXOKS (In use) (SWEC: MG2)"
signalling=fxo_ks
callerid=“Channel 2” <4002>
mailbox=4002
group=5
context=from-internal
channel => 2
callerid=
mailbox=
group=
context=default

;;; line="3 OPVXA1200/12/2 FXOKS (In use) (SWEC: MG2)"
signalling=fxo_ks
callerid=“Channel 3” <4003>
mailbox=4003
group=5
context=from-internal
channel => 3
callerid=
mailbox=
group=
context=default

;;; line="4 OPVXA1200/12/3 FXOKS (In use) (SWEC: MG2)"
signalling=fxo_ks
callerid=“Channel 4” <4004>
mailbox=4004
group=5
context=from-internal
channel => 4
callerid=
mailbox=
group=
context=default

;;; line="5 OPVXA1200/12/4 FXOKS (In use) (SWEC: MG2)"
signalling=fxo_ks
callerid=“Channel 5” <4005>
mailbox=4005
group=5
context=from-internal
channel => 5
callerid=
mailbox=
group=
context=default

;;; line="6 OPVXA1200/12/5 FXSKS (In use) (SWEC: MG2)"
signalling=fxs_ks
callerid=asreceived
group=9
context=from-zaptel
channel => 6
context=default

;;; line="7 OPVXA1200/12/6 FXSKS (In use) (SWEC: MG2)"
signalling=fxs_ks
callerid=asreceived
group=9
context=from-zaptel
channel => 7
context=default

25

someone know what is happening with my trixbox server?