Tdm 400

FreePBX Installation / Upgrade
1

HI ALL,
WHEN I CALL IN FROM PSTN, IT KEEPS ON RINGING FOREVER.

HOW DO I KNOW IF MY DIGIUM TDM 400 CARD IS INSTALLED OK ?
I HAVE 3 FXO MODULES AND ALL 3 LIGHTS ARE ON. DOES THIS MEAN THAT EVERYTHING IS INSTALLED OK ?

CALLS ARE SUPPOSED TO GO TO THE IVR WITH AN ANOUNCEMENT AND FROM THERE TO A QUEUE. AGENTS WOULD PICK UP CALLS FROM THE QUEUE. ALL THIS IS IN PLACE BUT SOMEHOW DOES NOT WORK.

I WILL HAVE SOME MORE QUESTIONS REGARDING THE SECOND PART LATER BUT FOR NOW I WANT TO GO STEP BY STEP.

SO FIRST, IF THE LIGHTS OF THE TDM 400 ARE ON, IS THAT GOOD ENOUGH ?

THANK’S A LOT.
MIKE

2

don’t shout!!

start with

3

As Sicko said stop shouting, you need to post info on your config and log traces.

You did not even tell us what kind of system you are running and all versions of software.

4

OK I FORGOT.
I HAVE THE LATEST VERSION OF FREE PBX, THAT WAS DOWNLOADED 2 DAYS AGO FROM THE FREE PBX WEBSITE.
I DON’T KNOW FOR WHAT REASON BUT IT’S CALLED “FREE PBX 1.815.210.58”.

NOW TO ADD A COMMENT,
IN ELASTIX THEY HAVE A “RECOGNIZE HARDWARE” BUTTON. EVEN THOUGH THE LIGHTS OF THE FXO MODULES ARE ON, YOU MUST STILL CLICK THAT BUTTON TO MAKE ASTERISK RECOGNIZE THE MODULES. SO I WONDER IF THIS LATEST FREE PBX VERSION DOES ALL THIS AUTOMATICALLY ?

HOW IS THAT ?

REGARDS.
MIKE

5

THANK’S
YOU SEE WHAT HAPPENS HERE IS THAT, EVERYBODY TALKS ABOUT SIP BUT ALMOST NEVER ABOUT PSTN. THE TDM 400 IS ONLY USED TO CONNECT TO PSTN. I DO NOT HAVE DID’S YET. SO I WANT TO GET THE SYSTEM TO WORK WITHOUT SIP OR IAX.
REGARDS.
MIKE

6

We can’t hear you, you are still shouting!!!

7

First, hit your caps lock key. Nobody likes being yelled at.

Second, you haven’t asked a question, told us what software you are running and now are making a ridiculous statement the FXO line support and other PSTN technologies are not documented.

Have you read the DAHDI manual?

8

YOUR COMMENTS ARE NOT VERY HELP FULL, SO I DO NOT WANT TO CONTINUE THIS DISCUSSION.
MIKE

9

and with only 3 fxo’s and your decision to not use sip or iax2, then how will your system work?

or should I say in MIKE speak

AND WITH ONLY 3 FXO’S AND YOUR DECISION TO NOT USE SIP OR IAX2, THEN HOW WILL YOUR SYSTEM WORK?

10

THAT IS FINE BY US.

go in peace. If you ever learn some basic courtesy, perhaps NETIQUETTE in mikespeak you are welcome back.

11

Whatever, not sure what you expected. You never even asked a question or told us the system you are running. Read the DAHDI docs and turn you caps lock off.

Our systems work, your’s doesn’t so a little courtesy would have gone a long way.

Perhaps the guy selling Ugg boots on the trixbox forum can help you.