Sysadmin Pro won't upgrade past 6.12.65-32

Current Asterisk Version: 13.7.2

I was running an early version of 6.12.65 and rather than go through running all of the scripts to get to the latest version, I purchased the Sysadmin Pro module and let it upgrade, which it did. My Freepbx PBX version now shows 6.12.65-32 but no further upgrades have been offered.

Running sysadmin_update_system from the command line gives this:

[root@freepbx ~]# cat /etc/schmooze/pbx-version
6.12.65-32
[root@freepbx ~]# /usr/sbin/sysadmin_update_system
Array
(
[status] => error
[data] => SimpleXMLElement Object
(
[0] => This system is up to date.
)

)
[root@freepbx ~]#

Should Sysadmin Pro let me upgrade to the version 10 release?

There is a single manual step to convert a 6.12 system to 10.13. Follow the instructions here:
http://wiki.freepbx.org/display/PPS/FreePBX-Distro-6.12.65

Once you are on 10.13.66-1, sysadmin will take you the rest of the way.

Thanks, I’ll run the script.

I had already read through the upgrade post you referred to but there’s no mention there of the need to run the last step manually. The two options described are either the manual script method or using Sysadmin Pro.