Speaking clock failing after upgrade chain

Good morning folks…

Last night I upgraded freepbx distro from 1.89.210.57-1 to 1.816.210.58-1, rebooting between each one.

Since this upgrade, my speaking clock is failing, hanging up without saying a word. Everything else seems to be fine. Not that it is an essential service, but it’s my usual way of testing extensions.

Any help greatly appreciated.

James

== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
– Executing [*60@from-internal:1] Answer(“SIP/202-00000026”, “”) in new stack
== Extension Changed 202[ext-local] new state InUse for Notify User 101
– Executing [*60@from-internal:2] Wait(“SIP/202-00000026”, “1”) in new stack
– Executing [*60@from-internal:3] Set(“SIP/202-00000026”, “NumLoops=0”) in new stack
– Executing [*60@from-internal:4] Set(“SIP/202-00000026”, “FutureTime=1349172115”) in new stack
– Executing [*60@from-internal:5] GosubIf(“SIP/202-00000026”, “1?sub-hr24format,s,1():sub-hr12format,s,1()”) in new stack
– Executing [s@sub-hr24format:1] Goto(“SIP/202-00000026”, “en,1”) in new stack
– Goto (sub-hr24format,en,1)
– Auto fallthrough, channel ‘SIP/202-00000026’ status is ‘UNKNOWN’