Skype for asterisk

General Help
1

Folk,

I’m trying to setup skype for asterisk. I’m using asteriskNOW 1.5, have setup the skype for asterisk using their readme. I would like to nos use FreeBBX to setup trunks, outbound and inbound routes.

Has anyone done this before? Please assist.

eb

2

All,

Please assist - I would like to setup an outbound trunk for making skype to pstn calls using sfa. I keep getting the message “all circuits are busy…”

log follows:

– Executing [[email protected]:24] GotoIf(“SIP/220-b7da9c98”, “1?outnum:skipoutnum”) in new stack
– Goto (macro-dialout-trunk,s,25)
– Executing [[email protected]:25] Set(“SIP/220-b7da9c98”, “the_num=254678986543”) in new stack
– Executing [[email protected]:26] Dial(“SIP/220-b7da9c98”, “Skype/254678986543,300,”) in new stack
– Couldn’t call 254678986543
== Everyone is busy/congested at this time (0:0/0/0)
– Executing [[email protected]:27] Goto(“SIP/220-b7da9c98”, “s-CHANUNAVAIL,1”) in new stack
– Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
– Executing [[email protected]:1] GotoIf(“SIP/220-b7da9c98”, “1?noreport”) in new stack
– Goto (macro-dialout-trunk,s-CHANUNAVAIL,3)
– Executing [[email protected]:3] NoOp(“SIP/220-b7da9c98”, “TRUNK Dial failed due to CHANUNAVAIL (hangupcause: 0) - failing through to other trunks”) in new stack
– Executing [[email protected]:5] Macro(“SIP/220-b7da9c98”, “outisbusy,”) in new stack
– Executing [[email protected]:1] Playback(“SIP/220-b7da9c98”, “all-circuits-busy-now,noanswer”) in new stack
– <SIP/220-b7da9c98> Playing ‘all-circuits-busy-now.ulaw’ (language ‘en’)
– Executing [[email protected]:2] Playback(“SIP/220-b7da9c98”, “pls-try-call-later,noanswer”) in new stack
– <SIP/220-b7da9c98> Playing ‘pls-try-call-later.ulaw’ (language ‘en’)
– Executing [[email protected]:3] Macro(“SIP/220-b7da9c98”, “hangupcall”) in new stack
– Executing [[email protected]:1] ResetCDR(“SIP/220-b7da9c98”, “vw”) in new stack
– Executing [[email protected]:2] NoCDR(“SIP/220-b7da9c98”, “”) in new stack
– Executing [[email protected]:3] GotoIf(“SIP/220-b7da9c98”, “1?skiprg”) in new stack
– Goto (macro-hangupcall,s,6)
– Executing [[email protected]:6] GotoIf(“SIP/220-b7da9c98”, “1?skipblkvm”) in new stack
– Goto (macro-hangupcall,s,9)
– Executing [[email protected]:9] GotoIf(“SIP/220-b7da9c98”, “1?theend”) in new stack
– Goto (macro-hangupcall,s,11)
– Executing [[email protected]:11] Hangup(“SIP/220-b7da9c98”, “”) in new stack
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on ‘SIP/220-b7da9c98’ in macro ‘hangupcall’
== Spawn extension (macro-outisbusy, s, 3) exited non-zero on ‘SIP/220-b7da9c98’ in macro ‘outisbusy’
== Spawn extension (from-internal, 6254678986543, 5) exited non-zero on ‘SIP/220-b7da9c98’
– Executing [[email protected]:1] Macro(“SIP/220-b7da9c98”, “hangupcall”) in new stack
– Executing [[email protected]:1] ResetCDR(“SIP/220-b7da9c98”, “vw”) in new stack
– Executing [[email protected]angupcall:2] NoCDR(“SIP/220-b7da9c98”, “”) in new stack
– Executing [[email protected]:3] GotoIf(“SIP/220-b7da9c98”, “1?skiprg”) in new stack
– Goto (macro-hangupcall,s,6)
– Executing [[email protected]:6] GotoIf(“SIP/220-b7da9c98”, “1?skipblkvm”) in new stack
– Goto (macro-hangupcall,s,9)
– Executing [[email protected]:9] GotoIf(“SIP/220-b7da9c98”, “1?theend”) in new stack
– Goto (macro-hangupcall,s,11)
– Executing [[email protected]:11] Hangup(“SIP/220-b7da9c98”, “”) in new stack
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on ‘SIP/220-b7da9c98’ in macro ‘hangupcall’
== Spawn extension (from-internal, h, 1) exited non-zero on ‘SIP/220-b7da9c98’