FreePBX | Register | Issues | Wiki | Portal | Support

SIPStation and failover IP


(Charles Cearley) #1

While doing some testing this weekend on checking if our new router would successfully fail over to our secondary ISP, apparently caused a nightmare with SIPStation. Tech support said the saw the PBX reporting my main ISP IP address but it was actually coming from my secondary ISP IP. My question is what can be done so that SIPStation will work on either IP or is this not possible?


(Tom Ray) #2

What do you have programmed as the External IP for the PBX? If you are explicitly assigning the External IP in FreePBX then that is what it will always use.

You might want to use Dynamic DNS for this and use a FQDN for the PBX’s external traffic.