FreePBX | Register | Issues | Wiki | Portal | Support

Sangoma A101 Not Found


(Mvogel4949) #1

For the second time in a row a new system on FreePBX14 will not recognize a Sangoma A101 card. On the last problem I had to manually create the etc/wanpipe/global.conf. I had to do the same thing this time but even after doing that the card is not found. Am I Missing something?


(Mvogel4949) #2

When I run setup-sangoma the system sees the A101 card but the gui will not display it


(TheJames) #3

open a ticket at https://support.freepbx.org


(Mvogel4949) #4

Ok. Just created it. Thank you


(Mvogel4949) #5

Would the setup be easier if I purchased the digium card as opposed to the sangoma card?


(TheJames) #6

Same support group, same company. No need to replace hardware.


(Mvogel4949) #7

robert from support worked on it and did a great job. no luck until we ran a yum update and that allowed the card to be visible in the gui. I would think it would still show on 7.5 but maybe it needed 7.6 for the dahdi module to show the card


(system) closed #8

This topic was automatically closed 7 days after the last reply. New replies are no longer allowed.