RTP log lines

When I have the console pulled up using asterisk -rv I can see the RTP setups such as:

> 0x7faebc1b0620 -- Strict RTP qualifying stream type: audio
> 0x7faebc1b0620 -- Strict RTP switching source address to WANIP1:62654
> 0x7faec41951f0 -- Strict RTP learning complete - Locking on source address PROVIDERIP:25966
> 0x7faebc1b0620 -- Strict RTP learning complete - Locking on source address WANIP1:62654

This has helped me with troubleshooting calls in the past, but these logs don’t make it into the /var/log/asterisk/full logfile. Is there a way to get these logs in that file?

in your ‘logfile settings’, check the verbosity, ‘console’ does not share the same verbosity as ‘full’

It seems properly set in that regard.

drop down the verbose field for each for full disclosure, you will possibly need >= 3 for those lines

If console and full are set to the same (On), shouldn’t they display the same? I will try and see if that works anyway

no, from the cli

logger show levels, caveat


Got it. Regardless, adjusting those levels worked.

1 Like

You’re welcome.

This topic was automatically closed 7 days after the last reply. New replies are no longer allowed.