Hello,
Randomly I get incoming calls failing. The call just hangs up. I have a Goip 8 receiving the calls. It kind of sounds like the GOIP is the device failing, but when this happens if I restart the GOIP, calls do not resume working. However if I reboot the Freepbx machine it all works fine.
This happens randomly at different times one to two times a week. I had it happening on a Virtual machine and now, also on a Sangoma box I bought.
This is the last event of the Asterisk logs before I just had to reboot. Any ideas out there?
[2018-11-16 13:50:06] VERBOSE[2121][C-00000767] netsock2.c: Using SIP RTP TOS bits 184
[2018-11-16 13:50:06] VERBOSE[2121][C-00000767] netsock2.c: Using SIP RTP CoS mark 5
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [158@from-internal:1] GotoIf(“SIP/151-0000238e”, “1?ext-local,158,1:followme-check,158,1”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx_builtins.c: Goto (ext-local,158,1)
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [158@ext-local:1] Set(“SIP/151-0000238e”, “__RINGTIMER=15”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [158@ext-local:2] Macro(“SIP/151-0000238e”, “exten-vm,novm,158,0,0,0”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-exten-vm:1] Macro(“SIP/151-0000238e”, “user-callerid,”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-user-callerid:1] Set(“SIP/151-0000238e”, “TOUCH_MONITOR=1542390606.54970”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-user-callerid:2] Set(“SIP/151-0000238e”, “AMPUSER=151”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-user-callerid:3] GotoIf(“SIP/151-0000238e”, “0?report”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-user-callerid:4] ExecIf(“SIP/151-0000238e”, “1?Set(REALCALLERIDNUM=151)”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-user-callerid:5] Set(“SIP/151-0000238e”, “AMPUSER=151”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-user-callerid:6] GotoIf(“SIP/151-0000238e”, “0?limit”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-user-callerid:7] Set(“SIP/151-0000238e”, “AMPUSERCIDNAME=151”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-user-callerid:8] ExecIf(“SIP/151-0000238e”, “0?Set(__CIDMASQUERADING=TRUE)”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-user-callerid:9] GotoIf(“SIP/151-0000238e”, “0?report”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-user-callerid:10] Set(“SIP/151-0000238e”, “AMPUSERCID=151”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-user-callerid:11] Set(“SIP/151-0000238e”, “__DIAL_OPTIONS=HhTtr”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-user-callerid:12] Set(“SIP/151-0000238e”, “CALLERID(all)=“151” <151>”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-user-callerid:13] GotoIf(“SIP/151-0000238e”, “0?limit”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-user-callerid:14] ExecIf(“SIP/151-0000238e”, “0?Set(GROUP(concurrency_limit)=151)”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-user-callerid:15] ExecIf(“SIP/151-0000238e”, “0?Set(CHANNEL(language)=)”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-user-callerid:16] NoOp(“SIP/151-0000238e”, “Macro Depth is 2”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-user-callerid:17] GotoIf(“SIP/151-0000238e”, “1?report2:macroerror”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx_builtins.c: Goto (macro-user-callerid,s,18)
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-user-callerid:18] GotoIf(“SIP/151-0000238e”, “0?continue”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-user-callerid:19] ExecIf(“SIP/151-0000238e”, “1?Set(__CALLEE_ACCOUNCODE=)”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-user-callerid:20] Set(“SIP/151-0000238e”, “__TTL=64”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-user-callerid:21] GotoIf(“SIP/151-0000238e”, “1?continue”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx_builtins.c: Goto (macro-user-callerid,s,37)
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-user-callerid:37] Set(“SIP/151-0000238e”, “CALLERID(number)=151”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-user-callerid:38] Set(“SIP/151-0000238e”, “CALLERID(name)=151”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-user-callerid:39] GotoIf(“SIP/151-0000238e”, “0?cnum”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-user-callerid:40] Set(“SIP/151-0000238e”, “CDR(cnam)=151”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-user-callerid:41] Set(“SIP/151-0000238e”, “CDR(cnum)=151”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-user-callerid:42] Set(“SIP/151-0000238e”, “CHANNEL(language)=en”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-exten-vm:2] Set(“SIP/151-0000238e”, “RingGroupMethod=none”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-exten-vm:3] Set(“SIP/151-0000238e”, “__EXTTOCALL=158”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-exten-vm:4] Set(“SIP/151-0000238e”, “__PICKUPMARK=158”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-exten-vm:5] Set(“SIP/151-0000238e”, “RT=”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-exten-vm:6] ExecIf(“SIP/151-0000238e”, “0?Macro(vm,novm,DIRECTDIAL,)”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-exten-vm:7] ExecIf(“SIP/151-0000238e”, “0?MacroExit()”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-exten-vm:8] ExecIf(“SIP/151-0000238e”, “0?Gosub(ext-intercom,*80158,1())”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-exten-vm:9] ExecIf(“SIP/151-0000238e”, “0?MacroExit()”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-exten-vm:10] ExecIf(“SIP/151-0000238e”, “0?ChanSpy(SIP/158,q)”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-exten-vm:11] ExecIf(“SIP/151-0000238e”, “0?MacroExit()”) in new stack
[2018-11-16 13:50:06] ERROR[6127][C-00000767] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-exten-vm:12] ExecIf(“SIP/151-0000238e”, “0?Macro(vm,novm,DIRECTDIAL,)”) in new stack
[2018-11-16 13:50:06] ERROR[6127][C-00000767] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-16 13:50:06] ERROR[6127][C-00000767] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-exten-vm:13] ExecIf(“SIP/151-0000238e”, “0?MacroExit()”) in new stack
[2018-11-16 13:50:06] ERROR[6127][C-00000767] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-16 13:50:06] ERROR[6127][C-00000767] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-exten-vm:14] ExecIf(“SIP/151-0000238e”, “0?Gosub(ext-intercom,*80158,1())”) in new stack
[2018-11-16 13:50:06] ERROR[6127][C-00000767] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-16 13:50:06] ERROR[6127][C-00000767] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-exten-vm:15] ExecIf(“SIP/151-0000238e”, “0?MacroExit()”) in new stack
[2018-11-16 13:50:06] ERROR[6127][C-00000767] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-16 13:50:06] ERROR[6127][C-00000767] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-exten-vm:16] ExecIf(“SIP/151-0000238e”, “0?ChanSpy(SIP/158,q)”) in new stack
[2018-11-16 13:50:06] ERROR[6127][C-00000767] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-16 13:50:06] ERROR[6127][C-00000767] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-exten-vm:17] ExecIf(“SIP/151-0000238e”, “0?MacroExit()”) in new stack
[2018-11-16 13:50:06] ERROR[6127][C-00000767] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-exten-vm:18] Gosub(“SIP/151-0000238e”, “sub-record-check,s,1(exten,158,dontcare)”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@sub-record-check:1] GotoIf(“SIP/151-0000238e”, “0?initialized”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@sub-record-check:2] Set(“SIP/151-0000238e”, “__REC_STATUS=INITIALIZED”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@sub-record-check:3] Set(“SIP/151-0000238e”, “NOW=1542390606”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@sub-record-check:4] Set(“SIP/151-0000238e”, “__DAY=16”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@sub-record-check:5] Set(“SIP/151-0000238e”, “__MONTH=11”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@sub-record-check:6] Set(“SIP/151-0000238e”, “__YEAR=2018”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@sub-record-check:7] Set(“SIP/151-0000238e”, “__TIMESTR=20181116-135006”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@sub-record-check:8] Set(“SIP/151-0000238e”, “__FROMEXTEN=151”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@sub-record-check:9] Set(“SIP/151-0000238e”, “__MON_FMT=wav”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@sub-record-check:10] NoOp(“SIP/151-0000238e”, “Recordings initialized”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@sub-record-check:11] ExecIf(“SIP/151-0000238e”, “0?Set(ARG3=dontcare)”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@sub-record-check:12] Set(“SIP/151-0000238e”, “REC_POLICY_MODE_SAVE=”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@sub-record-check:13] ExecIf(“SIP/151-0000238e”, “0?Set(REC_STATUS=NO)”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@sub-record-check:14] GotoIf(“SIP/151-0000238e”, “5?checkaction”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx_builtins.c: Goto (sub-record-check,s,17)
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@sub-record-check:17] GotoIf(“SIP/151-0000238e”, “1?sub-record-check,exten,1”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx_builtins.c: Goto (sub-record-check,exten,1)
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [exten@sub-record-check:1] NoOp(“SIP/151-0000238e”, “Exten Recording Check between 151 and 158”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [exten@sub-record-check:2] Set(“SIP/151-0000238e”, “CALLTYPE=internal”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [exten@sub-record-check:3] ExecIf(“SIP/151-0000238e”, “0?Set(CALLTYPE=)”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [exten@sub-record-check:4] Set(“SIP/151-0000238e”, “CALLEE=dontcare”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [exten@sub-record-check:5] ExecIf(“SIP/151-0000238e”, “0?Set(CALLEE=dontcare)”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [exten@sub-record-check:6] GotoIf(“SIP/151-0000238e”, “0?callee”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [exten@sub-record-check:7] GotoIf(“SIP/151-0000238e”, “1?caller”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx_builtins.c: Goto (sub-record-check,exten,13)
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [exten@sub-record-check:13] Set(“SIP/151-0000238e”, “RECMODE=dontcare”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [exten@sub-record-check:14] ExecIf(“SIP/151-0000238e”, “0?Set(RECMODE=dontcare)”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [exten@sub-record-check:15] ExecIf(“SIP/151-0000238e”, “1?Set(RECMODE=dontcare)”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [exten@sub-record-check:16] Gosub(“SIP/151-0000238e”, “recordcheck,1(dontcare,internal,158)”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [recordcheck@sub-record-check:1] NoOp(“SIP/151-0000238e”, “Starting recording check against dontcare”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [recordcheck@sub-record-check:2] Goto(“SIP/151-0000238e”, “dontcare”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx_builtins.c: Goto (sub-record-check,recordcheck,3)
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [recordcheck@sub-record-check:3] Return(“SIP/151-0000238e”, “”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [exten@sub-record-check:17] Return(“SIP/151-0000238e”, “”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-exten-vm:19] GotoIf(“SIP/151-0000238e”, “1?macrodial”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx_builtins.c: Goto (macro-exten-vm,s,25)
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-exten-vm:25] GosubIf(“SIP/151-0000238e”, “0?clrheader,1()”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-exten-vm:26] Macro(“SIP/151-0000238e”, “dial-one,HhTtr,158”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-dial-one:1] Set(“SIP/151-0000238e”, “DEXTEN=158”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-dial-one:2] Set(“SIP/151-0000238e”, “__CRM_SOURCE=151”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-dial-one:3] UserEvent(“SIP/151-0000238e”, “zulu-inbound-call,type:macro-dial-one,from:151,to:158”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-dial-one:4] ExecIf(“SIP/151-0000238e”, “0?Set(__EXTTOCALL=158)”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-dial-one:5] Set(“SIP/151-0000238e”, “DIALSTATUS_CW=”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-dial-one:6] GosubIf(“SIP/151-0000238e”, “0?screen,1()”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-dial-one:7] GosubIf(“SIP/151-0000238e”, “0?cf,1()”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-dial-one:8] GotoIf(“SIP/151-0000238e”, “1?skip1”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx_builtins.c: Goto (macro-dial-one,s,11)
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-dial-one:11] GotoIf(“SIP/151-0000238e”, “0?nodial”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-dial-one:12] GotoIf(“SIP/151-0000238e”, “0?continue”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-dial-one:13] Set(“SIP/151-0000238e”, “EXTHASCW=ENABLED”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-dial-one:14] GotoIf(“SIP/151-0000238e”, “0?next1:cwinusebusy”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx_builtins.c: Goto (macro-dial-one,s,26)
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-dial-one:26] GotoIf(“SIP/151-0000238e”, “0?next3:continue”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx_builtins.c: Goto (macro-dial-one,s,28)
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-dial-one:28] GotoIf(“SIP/151-0000238e”, “0?nodial”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-dial-one:29] GosubIf(“SIP/151-0000238e”, “1?dstring,1():dlocal,1()”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [dstring@macro-dial-one:1] Set(“SIP/151-0000238e”, “DSTRING=”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [dstring@macro-dial-one:2] Set(“SIP/151-0000238e”, “DEVICES=158&90158”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [dstring@macro-dial-one:3] ExecIf(“SIP/151-0000238e”, “0?Return()”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [dstring@macro-dial-one:4] ExecIf(“SIP/151-0000238e”, “0?Set(DEVICES=58&90158)”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [dstring@macro-dial-one:5] Set(“SIP/151-0000238e”, “LOOPCNT=2”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [dstring@macro-dial-one:6] Set(“SIP/151-0000238e”, “ITER=1”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [dstring@macro-dial-one:7] Set(“SIP/151-0000238e”, “THISDIAL=SIP/158”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [dstring@macro-dial-one:8] GosubIf(“SIP/151-0000238e”, “1?zap2dahdi,1()”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [zap2dahdi@macro-dial-one:1] ExecIf(“SIP/151-0000238e”, “0?Return()”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [zap2dahdi@macro-dial-one:2] Set(“SIP/151-0000238e”, “NEWDIAL=”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [zap2dahdi@macro-dial-one:3] Set(“SIP/151-0000238e”, “LOOPCNT2=1”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [zap2dahdi@macro-dial-one:4] Set(“SIP/151-0000238e”, “ITER2=1”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [zap2dahdi@macro-dial-one:5] Set(“SIP/151-0000238e”, “THISPART2=SIP/158”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [zap2dahdi@macro-dial-one:6] ExecIf(“SIP/151-0000238e”, “0?Set(THISPART2=DAHDI/158)”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [zap2dahdi@macro-dial-one:7] Set(“SIP/151-0000238e”, “NEWDIAL=SIP/158&”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [zap2dahdi@macro-dial-one:8] Set(“SIP/151-0000238e”, “ITER2=2”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [zap2dahdi@macro-dial-one:9] GotoIf(“SIP/151-0000238e”, “0?begin2”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [zap2dahdi@macro-dial-one:10] Set(“SIP/151-0000238e”, “THISDIAL=SIP/158”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [zap2dahdi@macro-dial-one:11] Return(“SIP/151-0000238e”, “”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [dstring@macro-dial-one:9] GotoIf(“SIP/151-0000238e”, “1?docheck”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx_builtins.c: Goto (macro-dial-one,dstring,15)
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [dstring@macro-dial-one:15] GotoIf(“SIP/151-0000238e”, “0?skipset”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [dstring@macro-dial-one:16] Set(“SIP/151-0000238e”, “DSTRING=SIP/158&”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [dstring@macro-dial-one:17] Set(“SIP/151-0000238e”, “ITER=2”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [dstring@macro-dial-one:18] GotoIf(“SIP/151-0000238e”, “1?begin”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx_builtins.c: Goto (macro-dial-one,dstring,7)
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [dstring@macro-dial-one:7] Set(“SIP/151-0000238e”, “THISDIAL=PJSIP/90158”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [dstring@macro-dial-one:8] GosubIf(“SIP/151-0000238e”, “1?zap2dahdi,1()”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [zap2dahdi@macro-dial-one:1] ExecIf(“SIP/151-0000238e”, “0?Return()”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [zap2dahdi@macro-dial-one:2] Set(“SIP/151-0000238e”, “NEWDIAL=”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [zap2dahdi@macro-dial-one:3] Set(“SIP/151-0000238e”, “LOOPCNT2=1”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [zap2dahdi@macro-dial-one:4] Set(“SIP/151-0000238e”, “ITER2=1”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [zap2dahdi@macro-dial-one:5] Set(“SIP/151-0000238e”, “THISPART2=PJSIP/90158”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [zap2dahdi@macro-dial-one:6] ExecIf(“SIP/151-0000238e”, “0?Set(THISPART2=DAHDIIP/90158)”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [zap2dahdi@macro-dial-one:7] Set(“SIP/151-0000238e”, “NEWDIAL=PJSIP/90158&”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [zap2dahdi@macro-dial-one:8] Set(“SIP/151-0000238e”, “ITER2=2”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [zap2dahdi@macro-dial-one:9] GotoIf(“SIP/151-0000238e”, “0?begin2”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [zap2dahdi@macro-dial-one:10] Set(“SIP/151-0000238e”, “THISDIAL=PJSIP/90158”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [zap2dahdi@macro-dial-one:11] Return(“SIP/151-0000238e”, “”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [dstring@macro-dial-one:9] GotoIf(“SIP/151-0000238e”, “0?docheck”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [dstring@macro-dial-one:10] NoOp(“SIP/151-0000238e”, “Debug: Found PJSIP Destination PJSIP/90158”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [dstring@macro-dial-one:11] GotoIf(“SIP/151-0000238e”, “0?doset”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [dstring@macro-dial-one:12] NoOp(“SIP/151-0000238e”, “Debug: Updating PJSIP Destination with PJSIP_DIAL_CONTACTS”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [dstring@macro-dial-one:13] Set(“SIP/151-0000238e”, “THISDIAL=”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [dstring@macro-dial-one:14] ExecIf(“SIP/151-0000238e”, “1?Set(DIALSTATUS=CHANUNAVAIL)”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [dstring@macro-dial-one:15] GotoIf(“SIP/151-0000238e”, “1?skipset”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx_builtins.c: Goto (macro-dial-one,dstring,17)
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [dstring@macro-dial-one:17] Set(“SIP/151-0000238e”, “ITER=3”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [dstring@macro-dial-one:18] GotoIf(“SIP/151-0000238e”, “0?begin”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [dstring@macro-dial-one:19] ExecIf(“SIP/151-0000238e”, “0?Return()”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [dstring@macro-dial-one:20] Set(“SIP/151-0000238e”, “DSTRING=SIP/158”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [dstring@macro-dial-one:21] Return(“SIP/151-0000238e”, “”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-dial-one:30] GotoIf(“SIP/151-0000238e”, “0?nodial”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-dial-one:31] GotoIf(“SIP/151-0000238e”, “0?skiptrace”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-dial-one:32] GosubIf(“SIP/151-0000238e”, “1?ctset,1():ctclear,1()”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [ctset@macro-dial-one:1] Set(“SIP/151-0000238e”, “DB(CALLTRACE/158)=151”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [ctset@macro-dial-one:2] Return(“SIP/151-0000238e”, “”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-dial-one:33] Set(“SIP/151-0000238e”, “D_OPTIONS=HhTtr”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-dial-one:34] GosubIf(“SIP/151-0000238e”, “0?func-set-sipheader,s,1(Alert-Info,)”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-dial-one:35] NoOp(“SIP/151-0000238e”, "Blind Transfer: , Attended Transfer: , User: 151, Alert Info: ") in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-dial-one:36] ExecIf(“SIP/151-0000238e”, “1?Set(ALERT_INFO=)”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-dial-one:37] ExecIf(“SIP/151-0000238e”, “0?Set(ALERT_INFO=)”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-dial-one:38] ExecIf(“SIP/151-0000238e”, “0?Set(ALERT_INFO=)”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-dial-one:39] ExecIf(“SIP/151-0000238e”, “0?Set(ALERT_INFO=Normal;volume=)”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-dial-one:40] ExecIf(“SIP/151-0000238e”, “0?Set(ALERT_INFO=Normal;volume=)”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-dial-one:41] GosubIf(“SIP/151-0000238e”, “0?func-set-sipheader,s,1(Alert-Info,)”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-dial-one:42] ExecIf(“SIP/151-0000238e”, “0?Set(CHANNEL(musicclass)=)”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-dial-one:43] GosubIf(“SIP/151-0000238e”, “0?qwait,1()”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-dial-one:44] Set(“SIP/151-0000238e”, “__CWIGNORE=”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-dial-one:45] Set(“SIP/151-0000238e”, “__KEEPCID=TRUE”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-dial-one:46] GotoIf(“SIP/151-0000238e”, “0?usegoto,1”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-dial-one:47] GotoIf(“SIP/151-0000238e”, “0?godial”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@macro-dial-one:48] Gosub(“SIP/151-0000238e”, “sub-presencestate-display,s,1(158)”) in new stack
[2018-11-16 13:50:06] VERBOSE[6127][C-00000767] pbx.c: Executing [s@sub-presencestate-display:1] Goto(“SIP/151-0000238e”, “state-not_set,1”) in new stack