Question about re-installation and re-activation

Hi there, I hope one of the Sangoma guys can help me with this question.

Currently I’m running FreePBX Distro 10.13.66-22 32 bit. I would like to move to the same version but 64 bit, and I understand that the only way to do that is to re-install it using the 64 bit edition.

I will not change the hardware whatsoever, so I would like to know if I can re-activate FreePBX directly without needing a Zend reset, as I have some commercial modules installed.

I would really like to know how to proceed, as I already lost one reset due to a failed motherboard.

You will use another zend reset in the process:
https://wiki.freepbx.org/display/FPG/How+to+Move+a+Deployment+ID+to+a+new+PBX

If you run out, you can request a reset by opening a support ticket of type ‘customer service’

Even though I will be using exactly the same hardware? I will not be changing anything hardware related, just going from 32 bit to 64 in order to be able to upgrade to FreePBX Distro 7 some time in the future, as I’m not ready to jump into 7 yet.