Problems with IVR

I’ve installed the FreePBX distro edition:

PBX Firmware: 3.211.63-10
PBX Service Pack: 1.0.0.0

I setup the trunk and extension and can receive calls. I’ve made a small IVR message with a short welcome and a “press 1 to speak with an operator”.

At inbound routes I setup my account, with DID number (my VoIP number) and the destination as IVR. Well, when I call myself, my Phone is ringing instead of the call is going to the IVR menu.

At the IVR page I setup the option that when people press 1, they will be put through extenions 101 (that is my extension).

Why don`t I get the IVR when I call? What do I need to do more?

Some log entry’s:
[2013-06-20 17:44:58] VERBOSE[1875][C-00000000] pbx.c: – Goto (macro-dial-one,s,42)
[2013-06-20 17:44:58] VERBOSE[1875][C-00000000] pbx.c: – Executing [[email protected]:42] Dial(“SIP/budgetphone-00000000”, “SIP/101,Ttr”) in new stack
[2013-06-20 17:44:58] VERBOSE[1875][C-00000000] netsock2.c: == Using SIP RTP TOS bits 184
[2013-06-20 17:44:58] VERBOSE[1875][C-00000000] netsock2.c: == Using SIP RTP CoS mark 5
[2013-06-20 17:44:58] VERBOSE[1875][C-00000000] app_dial.c: – Called SIP/101
[2013-06-20 17:44:58] VERBOSE[1875][C-00000000] app_dial.c: – SIP/101-00000001 is ringing
[2013-06-20 17:45:37] VERBOSE[1875][C-00000000] app_macro.c: == Spawn extension (macro-dial-one, s, 42) exited non-zero on ‘SIP/budgetphone-00000000’ in macro ‘dial-one’
[2013-06-20 17:45:37] VERBOSE[1875][C-00000000] app_macro.c: == Spawn extension (macro-exten-vm, s, 14) exited non-zero on ‘SIP/budgetphone-00000000’ in macro ‘exten-vm’
[2013-06-20 17:45:37] VERBOSE[1875][C-00000000] pbx.c: == Spawn extension (from-trunk, 101, 2) exited non-zero on ‘SIP/budgetphone-00000000’
[2013-06-20 17:45:37] VERBOSE[1875][C-00000000] pbx.c: – Executing [[email protected]:1] Macro(“SIP/budgetphone-00000000”, “hangupcall,”) in new stack
[2013-06-20 17:45:37] VERBOSE[1875][C-00000000] pbx.c: – Executing [[email protected]:1] GotoIf(“SIP/budgetphone-00000000”, “1?theend”) in new stack
[2013-06-20 17:45:37] VERBOSE[1875][C-00000000] pbx.c: – Goto (macro-hangupcall,s,3)
[2013-06-20 17:45:37] VERBOSE[1875][C-00000000] pbx.c: – Executing [[email protected]:3] ExecIf(“SIP/budgetphone-00000000”, “0?Set(CDR(recordingfile)=)”) in new stack
[2013-06-20 17:45:37] VERBOSE[1875][C-00000000] pbx.c: – Executing [[email protected]:4] Hangup(“SIP/budgetphone-00000000”, “”) in new stack
[2013-06-20 17:45:37] VERBOSE[1875][C-00000000] app_macro.c: == Spawn extension (macro-hangupcall, s, 4) exited non-zero on ‘SIP/budgetphone-00000000’ in macro ‘hangupcall’
[2013-06-20 17:45:37] VERBOSE[1875][C-00000000] pbx.c: == Spawn extension (from-trunk, h, 1) exited non-zero on ‘SIP/budgetphone-00000000’

No, there is only one inbound route.

Are there any other inbound routes defined, possibly with no DID set which might accept the call by default?

I manage to fix this, it looks it had something to do with the audio file I used. Only problem now is that my normal extension will ring once, than the IVR came in and other actions depends on what the caller does. But the one time ring of extension from my Phone it anoying.

Someone any idea how to get this solved?