Hello everyone,
I have a problem in communication between two branches where the problem occurs when I call and answer the problem occurs where the phone is heard from the other party but the other party not only hear the first second and the sound disappears, while the other party hears all the talk but not hear the first party,
The capture when i call between 2 extension before ring and after call and answered
The ssh show:
== Setting global variable ‘SIPDOMAIN’ to ‘192.168.62.153’
== Using SIP RTP Audio TOS bits 184
== Using SIP RTP Audio TOS bits 184 in TCLASS field.
== Using SIP RTP Audio CoS mark 5
– Executing [6060@from-internal:1] GotoIf(“PJSIP/1515-00000011”, “1?ext-local,6060,1:followme-check,6060,1”) in new stack
– Goto (ext-local,6060,1)
– Executing [6060@ext-local:1] Set(“PJSIP/1515-00000011”, “__RINGTIMER=15”) in new stack
– Executing [6060@ext-local:2] Macro(“PJSIP/1515-00000011”, “exten-vm,novm,6060,0,0,0”) in new stack
– Executing [s@macro-exten-vm:1] Macro(“PJSIP/1515-00000011”, “user-callerid,”) in new stack
– Executing [s@macro-user-callerid:1] Set(“PJSIP/1515-00000011”, “TOUCH_MONITOR=1551074803.22”) in new stack
– Executing [s@macro-user-callerid:2] Set(“PJSIP/1515-00000011”, “AMPUSER=1515”) in new stack
– Executing [s@macro-user-callerid:3] GotoIf(“PJSIP/1515-00000011”, “0?report”) in new stack
– Executing [s@macro-user-callerid:4] ExecIf(“PJSIP/1515-00000011”, “1?Set(REALCALLERIDNUM=1515)”) in new stack
– Executing [s@macro-user-callerid:5] Set(“PJSIP/1515-00000011”, “AMPUSER=1515”) in new stack
– Executing [s@macro-user-callerid:6] GotoIf(“PJSIP/1515-00000011”, “0?limit”) in new stack
– Executing [s@macro-user-callerid:7] Set(“PJSIP/1515-00000011”, “AMPUSERCIDNAME=newtest”) in new stack
– Executing [s@macro-user-callerid:8] ExecIf(“PJSIP/1515-00000011”, “0?Set(__CIDMASQUERADING=TRUE)”) in new stack
– Executing [s@macro-user-callerid:9] GotoIf(“PJSIP/1515-00000011”, “0?report”) in new stack
– Executing [s@macro-user-callerid:10] Set(“PJSIP/1515-00000011”, “AMPUSERCID=1515”) in new stack
– Executing [s@macro-user-callerid:11] Set(“PJSIP/1515-00000011”, “__DIAL_OPTIONS=HhTtr”) in new stack
– Executing [s@macro-user-callerid:12] Set(“PJSIP/1515-00000011”, “CALLERID(all)=“newtest” <1515>”) in new stack
– Executing [s@macro-user-callerid:13] GotoIf(“PJSIP/1515-00000011”, “0?limit”) in new stack
– Executing [s@macro-user-callerid:14] ExecIf(“PJSIP/1515-00000011”, “0?Set(GROUP(concurrency_limit)=1515)”) in new stack
– Executing [s@macro-user-callerid:15] ExecIf(“PJSIP/1515-00000011”, “0?Set(CHANNEL(language)=)”) in new stack
– Executing [s@macro-user-callerid:16] NoOp(“PJSIP/1515-00000011”, “Macro Depth is 2”) in new stack
– Executing [s@macro-user-callerid:17] GotoIf(“PJSIP/1515-00000011”, “1?report2:macroerror”) in new stack
– Goto (macro-user-callerid,s,18)
– Executing [s@macro-user-callerid:18] GotoIf(“PJSIP/1515-00000011”, “0?continue”) in new stack
– Executing [s@macro-user-callerid:19] ExecIf(“PJSIP/1515-00000011”, “1?Set(__CALLEE_ACCOUNCODE=)”) in new stack
– Executing [s@macro-user-callerid:20] Set(“PJSIP/1515-00000011”, “__TTL=64”) in new stack
– Executing [s@macro-user-callerid:21] GotoIf(“PJSIP/1515-00000011”, “1?continue”) in new stack
– Goto (macro-user-callerid,s,37)
– Executing [s@macro-user-callerid:37] Set(“PJSIP/1515-00000011”, “CALLERID(number)=1515”) in new stack
– Executing [s@macro-user-callerid:38] Set(“PJSIP/1515-00000011”, “CALLERID(name)=newtest”) in new stack
– Executing [s@macro-user-callerid:39] GotoIf(“PJSIP/1515-00000011”, “0?cnum”) in new stack
– Executing [s@macro-user-callerid:40] Set(“PJSIP/1515-00000011”, “CDR(cnam)=newtest”) in new stack
– Executing [s@macro-user-callerid:41] Set(“PJSIP/1515-00000011”, “CDR(cnum)=1515”) in new stack
– Executing [s@macro-user-callerid:42] Set(“PJSIP/1515-00000011”, “CHANNEL(language)=en”) in new stack
– Executing [s@macro-exten-vm:2] Set(“PJSIP/1515-00000011”, “RingGroupMethod=none”) in new stack
– Executing [s@macro-exten-vm:3] Set(“PJSIP/1515-00000011”, “__EXTTOCALL=6060”) in new stack
– Executing [s@macro-exten-vm:4] Set(“PJSIP/1515-00000011”, “__PICKUPMARK=6060”) in new stack
– Executing [s@macro-exten-vm:5] Set(“PJSIP/1515-00000011”, “RT=”) in new stack
[2019-02-25 09:06:43] WARNING[25580][C-0000000e]: chan_sip.c:23064 func_header_read: This function can only be used on SIP channels.
– Executing [s@macro-exten-vm:6] ExecIf(“PJSIP/1515-00000011”, “0?Macro(vm,novm,DIRECTDIAL,)”) in new stack
[2019-02-25 09:06:43] WARNING[25580][C-0000000e]: chan_sip.c:23064 func_header_read: This function can only be used on SIP channels.
[2019-02-25 09:06:43] WARNING[25580][C-0000000e]: chan_sip.c:23064 func_header_read: This function can only be used on SIP channels.
– Executing [s@macro-exten-vm:7] ExecIf(“PJSIP/1515-00000011”, “0?MacroExit()”) in new stack
[2019-02-25 09:06:43] WARNING[25580][C-0000000e]: chan_sip.c:23064 func_header_read: This function can only be used on SIP channels.
[2019-02-25 09:06:43] WARNING[25580][C-0000000e]: chan_sip.c:23064 func_header_read: This function can only be used on SIP channels.
– Executing [s@macro-exten-vm:8] ExecIf(“PJSIP/1515-00000011”, “0?Gosub(ext-intercom,nointercom6060,1())”) in new stack
[2019-02-25 09:06:43] WARNING[25580][C-0000000e]: chan_sip.c:23064 func_header_read: This function can only be used on SIP channels.
[2019-02-25 09:06:43] WARNING[25580][C-0000000e]: chan_sip.c:23064 func_header_read: This function can only be used on SIP channels.
– Executing [s@macro-exten-vm:9] ExecIf(“PJSIP/1515-00000011”, “0?MacroExit()”) in new stack
[2019-02-25 09:06:43] WARNING[25580][C-0000000e]: chan_sip.c:23064 func_header_read: This function can only be used on SIP channels.
[2019-02-25 09:06:43] WARNING[25580][C-0000000e]: chan_sip.c:23064 func_header_read: This function can only be used on SIP channels.
– Executing [s@macro-exten-vm:10] ExecIf(“PJSIP/1515-00000011”, “0?ChanSpy(PJSIP/6060,q)”) in new stack
[2019-02-25 09:06:43] WARNING[25580][C-0000000e]: chan_sip.c:23064 func_header_read: This function can only be used on SIP channels.
[2019-02-25 09:06:43] WARNING[25580][C-0000000e]: chan_sip.c:23064 func_header_read: This function can only be used on SIP channels.
– Executing [s@macro-exten-vm:11] ExecIf(“PJSIP/1515-00000011”, “0?MacroExit()”) in new stack
[2019-02-25 09:06:43] WARNING[25580][C-0000000e]: chan_sip.c:23064 func_header_read: This function can only be used on SIP channels.
– Executing [s@macro-exten-vm:12] ExecIf(“PJSIP/1515-00000011”, “0?Macro(vm,novm,DIRECTDIAL,)”) in new stack
– Executing [s@macro-exten-vm:13] ExecIf(“PJSIP/1515-00000011”, “0?MacroExit()”) in new stack
– Executing [s@macro-exten-vm:14] ExecIf(“PJSIP/1515-00000011”, “0?Gosub(ext-intercom,nointercom6060,1())”) in new stack
– Executing [s@macro-exten-vm:15] ExecIf(“PJSIP/1515-00000011”, “0?MacroExit()”) in new stack
– Executing [s@macro-exten-vm:16] ExecIf(“PJSIP/1515-00000011”, “0?ChanSpy(PJSIP/6060,q)”) in new stack
– Executing [s@macro-exten-vm:17] ExecIf(“PJSIP/1515-00000011”, “0?MacroExit()”) in new stack
– Executing [s@macro-exten-vm:18] Gosub(“PJSIP/1515-00000011”, “sub-record-check,s,1(exten,6060,dontcare)”) in new stack
– Executing [s@sub-record-check:1] GotoIf(“PJSIP/1515-00000011”, “0?initialized”) in new stack
– Executing [s@sub-record-check:2] Set(“PJSIP/1515-00000011”, “__REC_STATUS=INITIALIZED”) in new stack
– Executing [s@sub-record-check:3] Set(“PJSIP/1515-00000011”, “NOW=1551074803”) in new stack
– Executing [s@sub-record-check:4] Set(“PJSIP/1515-00000011”, “__DAY=25”) in new stack
– Executing [s@sub-record-check:5] Set(“PJSIP/1515-00000011”, “__MONTH=02”) in new stack
– Executing [s@sub-record-check:6] Set(“PJSIP/1515-00000011”, “__YEAR=2019”) in new stack
– Executing [s@sub-record-check:7] Set(“PJSIP/1515-00000011”, “__TIMESTR=20190225-090643”) in new stack
– Executing [s@sub-record-check:8] Set(“PJSIP/1515-00000011”, “__FROMEXTEN=1515”) in new stack
– Executing [s@sub-record-check:9] Set(“PJSIP/1515-00000011”, “__MON_FMT=wav”) in new stack
– Executing [s@sub-record-check:10] NoOp(“PJSIP/1515-00000011”, “Recordings initialized”) in new stack
– Executing [s@sub-record-check:11] ExecIf(“PJSIP/1515-00000011”, “0?Set(ARG3=dontcare)”) in new stack
– Executing [s@sub-record-check:12] Set(“PJSIP/1515-00000011”, “REC_POLICY_MODE_SAVE=”) in new stack
– Executing [s@sub-record-check:13] ExecIf(“PJSIP/1515-00000011”, “0?Set(REC_STATUS=NO)”) in new stack
– Executing [s@sub-record-check:14] GotoIf(“PJSIP/1515-00000011”, “5?checkaction”) in new stack
– Goto (sub-record-check,s,17)
– Executing [s@sub-record-check:17] GotoIf(“PJSIP/1515-00000011”, “1?sub-record-check,exten,1”) in new stack
– Goto (sub-record-check,exten,1)
– Executing [exten@sub-record-check:1] NoOp(“PJSIP/1515-00000011”, “Exten Recording Check between 1515 and 6060”) in new stack
– Executing [exten@sub-record-check:2] Set(“PJSIP/1515-00000011”, “CALLTYPE=internal”) in new stack
– Executing [exten@sub-record-check:3] ExecIf(“PJSIP/1515-00000011”, “0?Set(CALLTYPE=)”) in new stack
– Executing [exten@sub-record-check:4] Set(“PJSIP/1515-00000011”, “CALLEE=dontcare”) in new stack
– Executing [exten@sub-record-check:5] ExecIf(“PJSIP/1515-00000011”, “0?Set(CALLEE=dontcare)”) in new stack
– Executing [exten@sub-record-check:6] GotoIf(“PJSIP/1515-00000011”, “0?callee”) in new stack
– Executing [exten@sub-record-check:7] GotoIf(“PJSIP/1515-00000011”, “1?caller”) in new stack
– Goto (sub-record-check,exten,13)
– Executing [exten@sub-record-check:13] Set(“PJSIP/1515-00000011”, “RECMODE=dontcare”) in new stack
– Executing [exten@sub-record-check:14] ExecIf(“PJSIP/1515-00000011”, “0?Set(RECMODE=dontcare)”) in new stack
– Executing [exten@sub-record-check:15] ExecIf(“PJSIP/1515-00000011”, “1?Set(RECMODE=dontcare)”) in new stack
– Executing [exten@sub-record-check:16] Gosub(“PJSIP/1515-00000011”, “recordcheck,1(dontcare,internal,6060)”) in new stack
– Executing [recordcheck@sub-record-check:1] NoOp(“PJSIP/1515-00000011”, “Starting recording check against dontcare”) in new stack
– Executing [recordcheck@sub-record-check:2] Goto(“PJSIP/1515-00000011”, “dontcare”) in new stack
– Goto (sub-record-check,recordcheck,3)
– Executing [recordcheck@sub-record-check:3] Return(“PJSIP/1515-00000011”, “”) in new stack
– Executing [exten@sub-record-check:17] Return(“PJSIP/1515-00000011”, “”) in new stack
– Executing [s@macro-exten-vm:19] Macro(“PJSIP/1515-00000011”, “dial-one,HhTtr,6060”) in new stack
– Executing [s@macro-dial-one:1] Set(“PJSIP/1515-00000011”, “DEXTEN=6060”) in new stack
– Executing [s@macro-dial-one:2] Set(“PJSIP/1515-00000011”, “__CRM_SOURCE=1515”) in new stack
– Executing [s@macro-dial-one:3] ExecIf(“PJSIP/1515-00000011”, “0?Set(__EXTTOCALL=6060)”) in new stack
– Executing [s@macro-dial-one:4] Set(“PJSIP/1515-00000011”, “DIALSTATUS_CW=”) in new stack
– Executing [s@macro-dial-one:5] GosubIf(“PJSIP/1515-00000011”, “0?screen,1()”) in new stack
– Executing [s@macro-dial-one:6] GosubIf(“PJSIP/1515-00000011”, “0?cf,1()”) in new stack
– Executing [s@macro-dial-one:7] GotoIf(“PJSIP/1515-00000011”, “1?skip1”) in new stack
– Goto (macro-dial-one,s,10)
– Executing [s@macro-dial-one:10] GotoIf(“PJSIP/1515-00000011”, “0?nodial”) in new stack
– Executing [s@macro-dial-one:11] GotoIf(“PJSIP/1515-00000011”, “0?continue”) in new stack
– Executing [s@macro-dial-one:12] Set(“PJSIP/1515-00000011”, “EXTHASCW=ENABLED”) in new stack
– Executing [s@macro-dial-one:13] GotoIf(“PJSIP/1515-00000011”, “0?next1:cwinusebusy”) in new stack
– Goto (macro-dial-one,s,25)
– Executing [s@macro-dial-one:25] GotoIf(“PJSIP/1515-00000011”, “0?next3:continue”) in new stack
– Goto (macro-dial-one,s,27)
– Executing [s@macro-dial-one:27] GotoIf(“PJSIP/1515-00000011”, “0?nodial”) in new stack
– Executing [s@macro-dial-one:28] GosubIf(“PJSIP/1515-00000011”, “1?dstring,1():dlocal,1()”) in new stack
– Executing [dstring@macro-dial-one:1] Set(“PJSIP/1515-00000011”, “DSTRING=”) in new stack
– Executing [dstring@macro-dial-one:2] Set(“PJSIP/1515-00000011”, “DEVICES=6060”) in new stack
– Executing [dstring@macro-dial-one:3] ExecIf(“PJSIP/1515-00000011”, “0?Return()”) in new stack
– Executing [dstring@macro-dial-one:4] ExecIf(“PJSIP/1515-00000011”, “0?Set(DEVICES=060)”) in new stack
– Executing [dstring@macro-dial-one:5] Set(“PJSIP/1515-00000011”, “LOOPCNT=1”) in new stack
– Executing [dstring@macro-dial-one:6] Set(“PJSIP/1515-00000011”, “ITER=1”) in new stack
– Executing [dstring@macro-dial-one:7] Set(“PJSIP/1515-00000011”, “THISDIAL=PJSIP/6060”) in new stack
– Executing [dstring@macro-dial-one:8] GosubIf(“PJSIP/1515-00000011”, “1?zap2dahdi,1()”) in new stack
– Executing [zap2dahdi@macro-dial-one:1] ExecIf(“PJSIP/1515-00000011”, “0?Return()”) in new stack
– Executing [zap2dahdi@macro-dial-one:2] Set(“PJSIP/1515-00000011”, “NEWDIAL=”) in new stack
– Executing [zap2dahdi@macro-dial-one:3] Set(“PJSIP/1515-00000011”, “LOOPCNT2=1”) in new stack
– Executing [zap2dahdi@macro-dial-one:4] Set(“PJSIP/1515-00000011”, “ITER2=1”) in new stack
– Executing [zap2dahdi@macro-dial-one:5] Set(“PJSIP/1515-00000011”, “THISPART2=PJSIP/6060”) in new stack
– Executing [zap2dahdi@macro-dial-one:6] ExecIf(“PJSIP/1515-00000011”, “0?Set(THISPART2=DAHDIIP/6060)”) in new stack
– Executing [zap2dahdi@macro-dial-one:7] Set(“PJSIP/1515-00000011”, “NEWDIAL=PJSIP/6060&”) in new stack
– Executing [zap2dahdi@macro-dial-one:8] Set(“PJSIP/1515-00000011”, “ITER2=2”) in new stack
– Executing [zap2dahdi@macro-dial-one:9] GotoIf(“PJSIP/1515-00000011”, “0?begin2”) in new stack
– Executing [zap2dahdi@macro-dial-one:10] Set(“PJSIP/1515-00000011”, “THISDIAL=PJSIP/6060”) in new stack
– Executing [zap2dahdi@macro-dial-one:11] Return(“PJSIP/1515-00000011”, “”) in new stack
– Executing [dstring@macro-dial-one:9] GotoIf(“PJSIP/1515-00000011”, “0?docheck”) in new stack
– Executing [dstring@macro-dial-one:10] NoOp(“PJSIP/1515-00000011”, “Debug: Found PJSIP Destination PJSIP/6060”) in new stack
– Executing [dstring@macro-dial-one:11] GotoIf(“PJSIP/1515-00000011”, “0?doset”) in new stack
– Executing [dstring@macro-dial-one:12] NoOp(“PJSIP/1515-00000011”, “Debug: Updating PJSIP Destination with PJSIP_DIAL_CONTACTS”) in new stack
– Executing [dstring@macro-dial-one:13] Set(“PJSIP/1515-00000011”, “THISDIAL=PJSIP/6060/sip:[email protected]:5060”) in new stack
– Executing [dstring@macro-dial-one:14] ExecIf(“PJSIP/1515-00000011”, “0?Set(DIALSTATUS=CHANUNAVAIL)”) in new stack
– Executing [dstring@macro-dial-one:15] GotoIf(“PJSIP/1515-00000011”, “0?skipset”) in new stack
– Executing [dstring@macro-dial-one:16] Set(“PJSIP/1515-00000011”, “DSTRING=PJSIP/6060/sip:[email protected]:5060&”) in new stack
– Executing [dstring@macro-dial-one:17] Set(“PJSIP/1515-00000011”, “ITER=2”) in new stack
– Executing [dstring@macro-dial-one:18] GotoIf(“PJSIP/1515-00000011”, “0?begin”) in new stack
– Executing [dstring@macro-dial-one:19] ExecIf(“PJSIP/1515-00000011”, “0?Return()”) in new stack
– Executing [dstring@macro-dial-one:20] Set(“PJSIP/1515-00000011”, “DSTRING=PJSIP/6060/sip:[email protected]:5060”) in new stack
– Executing [dstring@macro-dial-one:21] Return(“PJSIP/1515-00000011”, “”) in new stack
– Executing [s@macro-dial-one:29] GotoIf(“PJSIP/1515-00000011”, “0?nodial”) in new stack
– Executing [s@macro-dial-one:30] GotoIf(“PJSIP/1515-00000011”, “0?skiptrace”) in new stack
– Executing [s@macro-dial-one:31] GosubIf(“PJSIP/1515-00000011”, “1?ctset,1():ctclear,1()”) in new stack
– Executing [ctset@macro-dial-one:1] Set(“PJSIP/1515-00000011”, “DB(CALLTRACE/6060)=1515”) in new stack
– Executing [ctset@macro-dial-one:2] Return(“PJSIP/1515-00000011”, “”) in new stack
– Executing [s@macro-dial-one:32] Set(“PJSIP/1515-00000011”, “D_OPTIONS=HhTtr”) in new stack
– Executing [s@macro-dial-one:33] GosubIf(“PJSIP/1515-00000011”, “0?func-set-sipheader,s,1(Alert-Info,)”) in new stack
– Executing [s@macro-dial-one:34] NoOp(“PJSIP/1515-00000011”, "Blind Transfer: , Attended Transfer: , User: 1515, Alert Info: ") in new stack
– Executing [s@macro-dial-one:35] ExecIf(“PJSIP/1515-00000011”, “1?Set(ALERT_INFO=)”) in new stack
– Executing [s@macro-dial-one:36] ExecIf(“PJSIP/1515-00000011”, “0?Set(ALERT_INFO=)”) in new stack
– Executing [s@macro-dial-one:37] ExecIf(“PJSIP/1515-00000011”, “0?Set(ALERT_INFO=)”) in new stack
– Executing [s@macro-dial-one:38] ExecIf(“PJSIP/1515-00000011”, “0?Set(ALERT_INFO=Normal;volume=)”) in new stack
– Executing [s@macro-dial-one:39] ExecIf(“PJSIP/1515-00000011”, “0?Set(ALERT_INFO=Normal;volume=)”) in new stack
– Executing [s@macro-dial-one:40] GosubIf(“PJSIP/1515-00000011”, “0?func-set-sipheader,s,1(Alert-Info,)”) in new stack
– Executing [s@macro-dial-one:41] ExecIf(“PJSIP/1515-00000011”, “0?Set(CHANNEL(musicclass)=)”) in new stack
– Executing [s@macro-dial-one:42] GosubIf(“PJSIP/1515-00000011”, “0?qwait,1()”) in new stack
– Executing [s@macro-dial-one:43] Set(“PJSIP/1515-00000011”, “__CWIGNORE=”) in new stack
– Executing [s@macro-dial-one:44] Set(“PJSIP/1515-00000011”, “__KEEPCID=TRUE”) in new stack
– Executing [s@macro-dial-one:45] GotoIf(“PJSIP/1515-00000011”, “0?usegoto,1”) in new stack
– Executing [s@macro-dial-one:46] GotoIf(“PJSIP/1515-00000011”, “0?godial”) in new stack
– Executing [s@macro-dial-one:47] Gosub(“PJSIP/1515-00000011”, “sub-presencestate-display,s,1(6060)”) in new stack
– Executing [s@sub-presencestate-display:1] Goto(“PJSIP/1515-00000011”, “state-available,1”) in new stack
– Goto (sub-presencestate-display,state-available,1)
– Executing [state-available@sub-presencestate-display:1] Set(“PJSIP/1515-00000011”, “PRESENCESTATE_DISPLAY=(Available)”) in new stack
– Executing [state-available@sub-presencestate-display:2] Return(“PJSIP/1515-00000011”, “”) in new stack
– Executing [s@macro-dial-one:48] Set(“PJSIP/1515-00000011”, “CONNECTEDLINE(name,i)=new(Available)”) in new stack
– Executing [s@macro-dial-one:49] Set(“PJSIP/1515-00000011”, “CONNECTEDLINE(num)=6060”) in new stack
– Executing [s@macro-dial-one:50] Set(“PJSIP/1515-00000011”, “D_OPTIONS=HhTtrI”) in new stack
– Executing [s@macro-dial-one:51] Macro(“PJSIP/1515-00000011”, “dialout-one-predial-hook,”) in new stack
– Executing [s@macro-dialout-one-predial-hook:1] MacroExit(“PJSIP/1515-00000011”, “”) in new stack
– Executing [s@macro-dial-one:52] ExecIf(“PJSIP/1515-00000011”, “0?Set(D_OPTIONS=HhtrII)”) in new stack
– Executing [s@macro-dial-one:53] NoOp(“PJSIP/1515-00000011”, “”) in new stack
– Executing [s@macro-dial-one:54] ExecIf(“PJSIP/1515-00000011”, “0?Set(D_OPTIONS=HhTtrIg)”) in new stack
– Executing [s@macro-dial-one:55] Dial(“PJSIP/1515-00000011”, “PJSIP/6060/sip:[email protected]:5060,HhTtrIb(func-apply-sipheaders^s^1)”) in new stack
– PJSIP/6060-00000012 Internal Gosub(func-apply-sipheaders,s,1) start
– Executing [s@func-apply-sipheaders:1] ExecIf(“PJSIP/6060-00000012”, “0?Set(CHANNEL(hangup_handler_push)=crm-hangup,s,1)”) in new stack
– Executing [s@func-apply-sipheaders:2] NoOp(“PJSIP/6060-00000012”, “Applying SIP Headers to channel PJSIP/6060-00000012”) in new stack
– Executing [s@func-apply-sipheaders:3] Set(“PJSIP/6060-00000012”, “TECH=PJSIP”) in new stack
– Executing [s@func-apply-sipheaders:4] Set(“PJSIP/6060-00000012”, “SIPHEADERKEYS=”) in new stack
– Executing [s@func-apply-sipheaders:5] While(“PJSIP/6060-00000012”, “0”) in new stack
– Jumping to priority 12
– Executing [s@func-apply-sipheaders:13] Return(“PJSIP/6060-00000012”, “”) in new stack
== Spawn extension (from-internal, 6060, 1) exited non-zero on ‘PJSIP/6060-00000012’
– PJSIP/6060-00000012 Internal Gosub(func-apply-sipheaders,s,1) complete GOSUB_RETVAL=
– Called PJSIP/6060/sip:[email protected]:5060
== Using SIP RTP Audio TOS bits 184
== Using SIP RTP Audio TOS bits 184 in TCLASS field.
== Using SIP RTP Audio CoS mark 5
– Connected line update to PJSIP/1515-00000011 prevented.
– PJSIP/6060-00000012 is ringing
– PJSIP/6060-00000012 is ringing
> 0x7fe068c77950 – Strict RTP learning after remote address set to: 192.168.117.150:5020
– PJSIP/6060-00000012 answered PJSIP/1515-00000011
> 0x7fe068aa52c0 – Strict RTP learning after remote address set to: 192.168.29.46:5020
– Channel PJSIP/6060-00000012 joined ‘simple_bridge’ basic-bridge <4332b6b4-1ac9-4ce3-bc7e-477f6eef3cc4>
– Channel PJSIP/1515-00000011 joined ‘simple_bridge’ basic-bridge <4332b6b4-1ac9-4ce3-bc7e-477f6eef3cc4>
> Bridge 4332b6b4-1ac9-4ce3-bc7e-477f6eef3cc4: switching from simple_bridge technology to native_rtp
> Remotely bridged ‘PJSIP/1515-00000011’ and ‘PJSIP/6060-00000012’ - media will flow directly between them
> 0x7fe068aa52c0 – Strict RTP learning after remote address set to: 192.168.29.46:5020
> 0x7fe068aa52c0 – Strict RTP switching to RTP target address 192.168.29.46:5020 as source
> 0x7fe068c77950 – Strict RTP learning after remote address set to: 192.168.117.150:5020
AsteriskNOW*CLI>
Any help