Problem after update

General Help
1

After updating FreePBX Framework to 2.10.0rc1.4 I’m getting two errors and the system is no longer accepting calls. Outbound is ok.

Could not run admin script.
Exit code was 127 and output was:
Added 1 hour, 42 minutes ago
(freepbx.reload_pre_script)

Could not run admin script.
Exit code was 127 and output was:
found language dir fr for directory, not installed on system, skipping
Added to globals: ASTETCDIR = /etc/asterisk
Added to globals: ASTMODDIR = /usr/lib/asterisk/modules
Added to globals: ASTVARLIBDIR = /var/lib/asterisk
Added to globals: ASTAGIDIR = /var/lib/asterisk/agi-bin
Added to globals: ASTSPOOLDIR = /var/spool/asterisk
Added to globals: ASTRUNDIR = /var/run/asterisk
Added to globals: ASTLOGDIR = /var/log/asterisk
Added to globals: CWINUSEBUSY = true
Added to globals: AMPDBENGINE = mysql
Added to globals: VMX_CONTEXT = from-internal
Added to globals: VMX_PRI = 1
Added to globals: VMX_TIMEDEST_CONTEXT =
Added to globals: VMX_TIMEDEST_EXT = dovm
Added to globals: VMX_TIMEDEST_PRI = 1
Added to globals: VMX_LOOPDEST_CONTEXT =
Added to globals: VMX_LOOPDEST_EXT = dovm
Added to globals: VMX_LOOPDEST_PRI = 1
Added to globals: MIXMON_DIR =
Added to globals: MIXMON_POST =
Notice: no Conferences defined
Notice: no sip trunks defined
Notice: no iax trunks defined
Notice: no AMP Users defined
Please update your modules and reload Asterisk by browsing to your server.
Added 1 hour, 42 minutes ago
(freepbx.reload_post_script)

Any ideas?

2

Do you have all the modules updated? Do you have any non standard FreePBX modules installed like EPM, Google Voice or something else installed. If so try removing or disabling them.

I just updated all modules and reloads are working fine.

3

I had a newer version of End Point Manager installed. I just downgraded that to 2.10.1.3 and updated the Framework to 2.10.0rc1.5. I had install FreePBX Framework 2.10.0rc1.4. Could that have been the problem?

After a reboot I’m still getting the same 2 errors.

4

try updating framework.

There’s a typo I just fixed that could have made this happen, probably should have made this happen.

Not quite sure why it didn’t happen in testing but anyhow please let us know here.

5

Currently running 2.10.0rc1.5 and the errors still show. Would you like to login and take a look?

6

I am getting this same exit code error:

Exit code was 127 and output was:

Added 8 seconds ago
(freepbx.reload_pre_script)

I’ve disabled all the language support modules, third party modules and anything else still listed at 2.9.*

It also won’t connect to any of my trunks since the upgrade.

7

Please check in Advanced Settings under Dialplan and Operational if you have anything set for the PRE_RELOAD or POST_RELOAD script fields and let us know.

8

oops … looks like the module version of framework didn’t get bumped, pull it down again and if still failing then provide the requested information. Sorry.

9

POST_RELOAD Debug Mode = False

10

Please wait while module actions are performed

Downloading framework 2567862 of 2567862 (100%)
Untarring…Done.
installing files to /var/www/html…done
installing files to /var/lib/asterisk/bin…done
installing files to /var/lib/asterisk/agi-bin…done
Checking for upgrades…No further upgrades necessary
framework file install done, removing packages from module
file/directory: /var/www/html/admin/modules/framework/amp_conf removed successfully
file/directory: /var/www/html/admin/modules/framework/upgrades removed successfully
file/directory: /var/www/html/admin/modules/framework/libfreepbx.install.php removed successfully
framework installed successfully

11

wrong POST_RELOAD setting, the Script … but did the new framework fix the problem

12

Nope, still have the same problem.
Here’s a screen shot

13

I’m still getting the same problem after an upadte as well to Rc1.6

14

I’m still getting the same problem after an upadte as well to Rc1.6

15

I was getting these errors and now after RC1.5 do not. The errors still show from when they happened with RC1.4. Not happening now just still show and can’t remove them. Upgraded to RC1.6 still no errors just the old ones and can’t remove them from the status window.

16

On start up I’m getting a wanpipe1.conf error. Should I just reload FreePBX?

17

Do you have a sangoma card installed. If not just ignore that. We install wanpipe by default on the distro but it will give that error if you do not have a card configured on startup but does not hurt anything.

18

OK cool. I have the Digium TE121 so I guess that wouldn’t be the problem. Now that 2.10.0rc1.6 has been applied I’ll retry the incoming calls after 5:00pm today. Stay tuned…

19

Hello All,

I’m experiencing the same issue:

Exit code was 127 and output was:
found language dir fr for directory, not installed on system, skipping …

I have applied on one server the upgrade-1.89.210.57-1.sh script as well as all the modules.

20

Just done all updates and found 2 errors coming up.
Framework version is 2.10.0rc1.6
Will test incoming tomorrow as not in now…

Pezzz

Edit : Just tested IAX2 trunk in and that works fine.