andreslie1
(Andreslie1)
January 14, 2016, 8:27pm
1
when i setup pjsip transport to my local ip divice staus its unavailable calls work but queues dont ring agents this how divices looks
Contact: 3001/sip:[email protected] :5060 Unavail 0.000
if i setup transport to ip 0.0.0.0 ststus its avail i net 2 transport becouse i had 2 networks interface an d one its connected to mi isp trunk and i ned to send sip invite header with isp ip
thanks
andreslie1
(Andreslie1)
January 14, 2016, 9:32pm
3
some cli
localhost*CLI> pjsip show contacts
Contact: <Aor/ContactUri…> <Status…> <RTT(ms)…>
Contact: 3001/sip:[email protected] :5060 Unavail 0.000
Contact: 3002/sip:[email protected] :5060 Unavail 0.000
Contact: 3003/sip:[email protected] :5060 Unavail 0.000
Contact: 3004/sip:[email protected] :5060 Unavail 0.000
Contact: 3005/sip:[email protected] :5060 Unavail 0.000
Contact: 3006/sip:[email protected] :5060 Unavail 0.000
Contact: 3011/sip:[email protected] :5060 Unavail 0.000
Contact: 3012/sip:[email protected] :50346;transport=TCP Avail 12.709
Contact: 3013/sip:[email protected] :5060 Unavail 0.000
Contact: 3014/sip:[email protected] :5060 Unavail 0.000
Contact: 3015/sip:[email protected] :5060 Unavail 0.000
Contact: 3016/sip:[email protected] :5060 Unavail 0.000
Contact: CLARO/sip:[email protected] :5060 Avail 13.231
localhostCLI> pjsip show tr
transports transport
localhost CLI> pjsip show transports
Transport: <TransportId…> <BindAddress…>
Transport: 0.0.0.0-tcp tcp 0 0 0.0.0.0:5060
Transport: 10.11.37.14-udp udp 0 0 10.11.37.14:5060
Transport: 192.168.48.10-udp udp 0 0 192.168.48.10:5060
why transport 0.0.0.0 tcp works ??
mos33
October 3, 2019, 7:34am
4
andreslie1:
pjsip show contacts
I have the same issue with PJSIP, after some time it becomes Unavail