Phone is ringing but no dail tone


(robin1196) #1

Hello,

I’m running
PBX Version: 15.0.17.5
PBX Distro:12.7.8-2008-1.sng7
Asterisk Version: 16.13.0

When a caller is calling an extensionnumer they do not hear a dailtone.
When the phone is picked up you are enable to speak and hear the person.
In my opinion there is no dail tone set up by defailt for this extension but where can you change these settings?
The asterisklogfile genereted the following lines.
Did anybody know what the problem can be?

15802 [2020-12-25 13:26:08] VERBOSE[2323][C-00000ee2] netsock2.c: Using SIP RTP TOS bits 184
15803 [2020-12-25 13:26:08] VERBOSE[2323][C-00000ee2] netsock2.c: Using SIP RTP CoS mark 5
15804 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [+3185xxxxxxx@from-trunk:1] Set(“SIP/incoming-00000145”, “__DIRECTION=INBOUND”) in new stack
15805 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [+3185xxxxxxx@from-trunk:2] Gosub(“SIP/incoming-00000145”, “sub-record-check,s,1(in,+3185xxxxxxx,dontcare)”) in new stack
15806 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@sub-record-check:1] GotoIf(“SIP/incoming-00000145”, “0?initialized”) in new stack
15807 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@sub-record-check:2] Set(“SIP/incoming-00000145”, “__REC_STATUS=INITIALIZED”) in new stack
15808 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@sub-record-check:3] Set(“SIP/incoming-00000145”, “NOW=1608899168”) in new stack
15809 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@sub-record-check:4] Set(“SIP/incoming-00000145”, “__DAY=25”) in new stack
15810 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@sub-record-check:5] Set(“SIP/incoming-00000145”, “__MONTH=12”) in new stack
15811 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@sub-record-check:6] Set(“SIP/incoming-00000145”, “__YEAR=2020”) in new stack
15812 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@sub-record-check:7] Set(“SIP/incoming-00000145”, “__TIMESTR=20201225-132608”) in new stack
15813 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@sub-record-check:8] Set(“SIP/incoming-00000145”, “__FROMEXTEN=unknown”) in new stack
15814 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@sub-record-check:9] Set(“SIP/incoming-00000145”, “__MON_FMT=wav”) in new stack
15815 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@sub-record-check:10] NoOp(“SIP/incoming-00000145”, “Recordings initialized”) in new stack
15816 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@sub-record-check:11] ExecIf(“SIP/incoming-00000145”, “0?Set(ARG3=dontcare)”) in new stack
15817 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@sub-record-check:12] Set(“SIP/incoming-00000145”, “REC_POLICY_MODE_SAVE=”) in new stack
15818 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@sub-record-check:13] ExecIf(“SIP/incoming-00000145”, “0?Set(REC_STATUS=NO)”) in new stack
15819 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@sub-record-check:14] GotoIf(“SIP/incoming-00000145”, “2?checkaction”) in new stack
15820 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx_builtins.c: Goto (sub-record-check,s,17)
15821 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@sub-record-check:17] GotoIf(“SIP/incoming-00000145”, “1?sub-record-check,in,1”) in new stack
15822 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx_builtins.c: Goto (sub-record-check,in,1)
15823 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [in@sub-record-check:1] NoOp(“SIP/incoming-00000145”, “Inbound Recording Check to +3185xxxxxxx”) in new stack
15824 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [in@sub-record-check:2] Set(“SIP/incoming-00000145”, “FROMEXTEN=unknown”) in new stack
15825 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [in@sub-record-check:3] ExecIf(“SIP/incoming-00000145”, “12?Set(FROMEXTEN=+316xxxxxxxx)”) in new stack
15826 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [in@sub-record-check:4] Gosub(“SIP/incoming-00000145”, “recordcheck,1(dontcare,in,+3185xxxxxxx)”) in new stack
15827 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [recordcheck@sub-record-check:1] NoOp(“SIP/incoming-00000145”, “Starting recording check against dontcare”) in new stack
15828 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [recordcheck@sub-record-check:2] Goto(“SIP/incoming-00000145”, “dontcare”) in new stack
15829 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx_builtins.c: Goto (sub-record-check,recordcheck,3)
15830 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [recordcheck@sub-record-check:3] Return(“SIP/incoming-00000145”, “”) in new stack
15831 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [in@sub-record-check:5] Return(“SIP/incoming-00000145”, “”) in new stack
15832 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [+3185xxxxxxx@from-trunk:3] Set(“SIP/incoming-00000145”, “CHANNEL(tonezone)=us”) in new stack
15833 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [+3185xxxxxxx@from-trunk:4] Set(“SIP/incoming-00000145”, “__FROM_DID=+3185xxxxxxx”) in new stack
15834 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [+3185xxxxxxx@from-trunk:5] Set(“SIP/incoming-00000145”, “returnhere=1”) in new stack
15835 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [+3185xxxxxxx@from-trunk:6] Gosub(“SIP/incoming-00000145”, “app-blacklist-check,s,1()”) in new stack
15836 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@app-blacklist-check:1] GotoIf(“SIP/incoming-00000145”, “0?blacklisted”) in new stack
15837 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@app-blacklist-check:2] Set(“SIP/incoming-00000145”, “CALLED_BLACKLIST=1”) in new stack
15838 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@app-blacklist-check:3] Return(“SIP/incoming-00000145”, “”) in new stack
15839 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [+3185xxxxxxx@from-trunk:7] Set(“SIP/incoming-00000145”, “CDR(did)=+3185xxxxxxx”) in new stack
15840 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [+3185xxxxxxx@from-trunk:8] GotoIf(“SIP/incoming-00000145”, “0?”) in new stack
15841 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [+3185xxxxxxx@from-trunk:9] ExecIf(“SIP/incoming-00000145”, “1 ?Set(CALLERID(name)=+316xxxxxxxx)”) in new stack
15842 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [+3185xxxxxxx@from-trunk:10] Set(“SIP/incoming-00000145”, “__MOHCLASS=”) in new stack
15843 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [+3185xxxxxxx@from-trunk:11] Set(“SIP/incoming-00000145”, “__REVERSAL_REJECT=FALSE”) in new stack
15844 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [+3185xxxxxxx@from-trunk:12] GotoIf(“SIP/incoming-00000145”, “1?post-reverse-charge”) in new stack
15845 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx_builtins.c: Goto (from-trunk,+3185xxxxxxx,14)
15846 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [+3185xxxxxxx@from-trunk:14] NoOp(“SIP/incoming-00000145”, “”) in new stack
15847 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [+3185xxxxxxx@from-trunk:15] Set(“SIP/incoming-00000145”, “__CALLINGNAMEPRES_SV=allowed_not_screened”) in new stack
15848 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [+3185xxxxxxx@from-trunk:16] Set(“SIP/incoming-00000145”, “__CALLINGNUMPRES_SV=allowed_not_screened”) in new stack
15849 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [+3185xxxxxxx@from-trunk:17] Set(“SIP/incoming-00000145”, “CALLERID(name-pres)=allowed_not_screened”) in new stack
15850 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [+3185xxxxxxx@from-trunk:18] Set(“SIP/incoming-00000145”, “CALLERID(num-pres)=allowed_not_screened”) in new stack
15851 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [+3185xxxxxxx@from-trunk:19] NoOp(“SIP/incoming-00000145”, “CallerID Entry Point”) in new stack
15852 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [+3185xxxxxxx@from-trunk:20] Set(“SIP/incoming-00000145”, “__CRM_DIRECTION=INBOUND”) in new stack
15853 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [+3185xxxxxxx@from-trunk:21] Set(“SIP/incoming-00000145”, “__CRM_SOURCE=+316xxxxxxxx”) in new stack
15854 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [+3185xxxxxxx@from-trunk:22] Set(“SIP/incoming-00000145”, “__CRM_LINKEDID=1608899168.827”) in new stack
15855 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [+3185xxxxxxx@from-trunk:23] AGI(“SIP/incoming-00000145”, “agi://127.0.0.1/sangomacrm.agi,true”) in new stack
15856 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] res_agi.c: <SIP/incoming-00000145>AGI Script agi://127.0.0.1/sangomacrm.agi completed, returning 0
15857 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [+3185xxxxxxx@from-trunk:24] ExecIf(“SIP/incoming-00000145”, “1?Set(CHANNEL(hangup_handler_push)=crm-hangup,s,1)”) in new stack
15858 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [+3185xxxxxxx@from-trunk:25] Goto(“SIP/incoming-00000145”, “timeconditions,2,1”) in new stack
15859 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx_builtins.c: Goto (timeconditions,2,1)
15860 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [2@timeconditions:1] Set(“SIP/incoming-00000145”, “DB(TC/2/INUSESTATE)=INUSE”) in new stack
15861 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [2@timeconditions:2] Set(“SIP/incoming-00000145”, “DB(TC/2/NOT_INUSESTATE)=NOT_INUSE”) in new stack
15862 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [2@timeconditions:3] NoOp(“SIP/incoming-00000145”, “TIMENOW: 13:26,Fri,25,Dec,Europe/Amsterdam”) in new stack
15863 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [2@timeconditions:4] NoOp(“SIP/incoming-00000145”, “TIMEMATCHED: TRUE”) in new stack
15864 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [2@timeconditions:5] GotoIfTime(“SIP/incoming-00000145”, “00:01-23:59,mon-sun,,,Europe/Amsterdam?truestate”) in new stack
15865 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx_builtins.c: Goto (timeconditions,2,14)
15866 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [2@timeconditions:14] GotoIf(“SIP/incoming-00000145”, “0?falsegoto”) in new stack
15867 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [2@timeconditions:15] ExecIf(“SIP/incoming-00000145”, “0?Set(DB(TC/2)=)”) in new stack
15868 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [2@timeconditions:16] Set(“SIP/incoming-00000145”, “DEVICE_STATE(Custom:TC2)=NOT_INUSE”) in new stack
15869 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [2@timeconditions:17] ExecIf(“SIP/incoming-00000145”, “0?Set(DEVICE_STATE(Custom:TCSTICKY)=INUSE)”) in new stack
15870 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [2@timeconditions:18] GotoIf(“SIP/incoming-00000145”, “1?from-did-direct,3000,1”) in new stack
15871 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx_builtins.c: Goto (from-did-direct,3000,1)
15872 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [3000@from-did-direct:1] GotoIf(“SIP/incoming-00000145”, “1?ext-local,3000,1:followme-check,3000,1”) in new stack
15873 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx_builtins.c: Goto (ext-local,3000,1)
15874 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [3000@ext-local:1] Set(“SIP/incoming-00000145”, “__RINGTIMER=15”) in new stack
15875 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [3000@ext-local:2] ExecIf(“SIP/incoming-00000145”, “0?Set(__CWIGNORE=)”) in new stack
15876 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [3000@ext-local:3] Macro(“SIP/incoming-00000145”, “exten-vm,novm,3000,0,0,0”) in new stack
15877 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-exten-vm:1] Macro(“SIP/incoming-00000145”, “user-callerid,”) in new stack
15878 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-user-callerid:1] Set(“SIP/incoming-00000145”, “TOUCH_MONITOR=1608899168.827”) in new stack
15879 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-user-callerid:2] Set(“SIP/incoming-00000145”, “AMPUSER=+316xxxxxxxx”) in new stack
15880 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-user-callerid:3] Set(“SIP/incoming-00000145”, “HOTDESCKCHAN=incoming-00000145”) in new stack
15881 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-user-callerid:4] Set(“SIP/incoming-00000145”, “HOTDESKEXTEN=incoming”) in new stack
15882 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-user-callerid:5] Set(“SIP/incoming-00000145”, “HOTDESKCALL=0”) in new stack
15883 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-user-callerid:6] ExecIf(“SIP/incoming-00000145”, “0?Set(HOTDESKCALL=1)”) in new stack
15884 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-user-callerid:7] ExecIf(“SIP/incoming-00000145”, “0?Set(CALLERID(name)=)”) in new stack
15885 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-user-callerid:8] GotoIf(“SIP/incoming-00000145”, “0?report”) in new stack
15886 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-user-callerid:9] ExecIf(“SIP/incoming-00000145”, “1?Set(REALCALLERIDNUM=+316xxxxxxxx)”) in new stack
15887 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-user-callerid:10] Set(“SIP/incoming-00000145”, “AMPUSER=”) in new stack
15888 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-user-callerid:11] GotoIf(“SIP/incoming-00000145”, “0?limit”) in new stack
15889 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-user-callerid:12] Set(“SIP/incoming-00000145”, “AMPUSERCIDNAME=”) in new stack
15890 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-user-callerid:13] ExecIf(“SIP/incoming-00000145”, “0?Set(__CIDMASQUERADING=TRUE)”) in new stack
15891 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-user-callerid:14] GotoIf(“SIP/incoming-00000145”, “1?report”) in new stack
15892 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx_builtins.c: Goto (macro-user-callerid,s,23)
15893 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-user-callerid:23] NoOp(“SIP/incoming-00000145”, “Macro Depth is 2”) in new stack
15894 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-user-callerid:24] GotoIf(“SIP/incoming-00000145”, “1?report2:macroerror”) in new stack
15895 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx_builtins.c: Goto (macro-user-callerid,s,25)
15896 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-user-callerid:25] GotoIf(“SIP/incoming-00000145”, “0?continue”) in new stack
15897 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-user-callerid:26] ExecIf(“SIP/incoming-00000145”, “1?Set(__CALLEE_ACCOUNCODE=)”) in new stack
15898 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-user-callerid:27] Set(“SIP/incoming-00000145”, “__TTL=64”) in new stack
15899 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-user-callerid:28] GotoIf(“SIP/incoming-00000145”, “1?continue”) in new stack
15900 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx_builtins.c: Goto (macro-user-callerid,s,44)
15901 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-user-callerid:44] Set(“SIP/incoming-00000145”, “CALLERID(number)=+316xxxxxxxx”) in new stack
15902 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-user-callerid:45] Set(“SIP/incoming-00000145”, “CALLERID(name)=+316xxxxxxxx”) in new stack
15903 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-user-callerid:46] GotoIf(“SIP/incoming-00000145”, “0?cnum”) in new stack
15904 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-user-callerid:47] Set(“SIP/incoming-00000145”, “CDR(cnam)=+316xxxxxxxx”) in new stack
15905 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-user-callerid:48] Set(“SIP/incoming-00000145”, “CDR(cnum)=+316xxxxxxxx”) in new stack
15906 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-user-callerid:49] Set(“SIP/incoming-00000145”, “CHANNEL(language)=nl”) in new stack
15907 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-exten-vm:2] Set(“SIP/incoming-00000145”, “RingGroupMethod=none”) in new stack
15908 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-exten-vm:3] Set(“SIP/incoming-00000145”, “__EXTTOCALL=3000”) in new stack
15909 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-exten-vm:4] Set(“SIP/incoming-00000145”, “__PICKUPMARK=3000”) in new stack
15910 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-exten-vm:5] Set(“SIP/incoming-00000145”, “RT=”) in new stack
15911 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-exten-vm:6] ExecIf(“SIP/incoming-00000145”, “0?Macro(vm,novm,DIRECTDIAL,)”) in new stack
15912 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-exten-vm:7] ExecIf(“SIP/incoming-00000145”, “0?MacroExit()”) in new stack
15913 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-exten-vm:8] ExecIf(“SIP/incoming-00000145”, “0?Gosub(ext-intercom,*803000,1())”) in new stack
15914 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-exten-vm:9] ExecIf(“SIP/incoming-00000145”, “0?MacroExit()”) in new stack
15915 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-exten-vm:10] ExecIf(“SIP/incoming-00000145”, “0?ChanSpy(SIP/3000,q)”) in new stack
15916 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-exten-vm:11] ExecIf(“SIP/incoming-00000145”, “0?MacroExit()”) in new stack
15917 [2020-12-25 13:26:08] ERROR[9635][C-00000ee2] pbx_functions.c: Function PJSIP_HEADER not registered
15918 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-exten-vm:12] ExecIf(“SIP/incoming-00000145”, “0?Macro(vm,novm,DIRECTDIAL,)”) in new stack
15919 [2020-12-25 13:26:08] ERROR[9635][C-00000ee2] pbx_functions.c: Function PJSIP_HEADER not registered
15920 [2020-12-25 13:26:08] ERROR[9635][C-00000ee2] pbx_functions.c: Function PJSIP_HEADER not registered
15921 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-exten-vm:13] ExecIf(“SIP/incoming-00000145”, “0?MacroExit()”) in new stack
15922 [2020-12-25 13:26:08] ERROR[9635][C-00000ee2] pbx_functions.c: Function PJSIP_HEADER not registered
15923 [2020-12-25 13:26:08] ERROR[9635][C-00000ee2] pbx_functions.c: Function PJSIP_HEADER not registered
15924 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-exten-vm:14] ExecIf(“SIP/incoming-00000145”, “0?Gosub(ext-intercom,*803000,1())”) in new stack
15925 [2020-12-25 13:26:08] ERROR[9635][C-00000ee2] pbx_functions.c: Function PJSIP_HEADER not registered
15926 [2020-12-25 13:26:08] ERROR[9635][C-00000ee2] pbx_functions.c: Function PJSIP_HEADER not registered
15927 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-exten-vm:15] ExecIf(“SIP/incoming-00000145”, “0?MacroExit()”) in new stack
15928 [2020-12-25 13:26:08] ERROR[9635][C-00000ee2] pbx_functions.c: Function PJSIP_HEADER not registered
15929 [2020-12-25 13:26:08] ERROR[9635][C-00000ee2] pbx_functions.c: Function PJSIP_HEADER not registered
15930 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-exten-vm:16] ExecIf(“SIP/incoming-00000145”, “0?ChanSpy(SIP/3000,q)”) in new stack
15931 [2020-12-25 13:26:08] ERROR[9635][C-00000ee2] pbx_functions.c: Function PJSIP_HEADER not registered
15932 [2020-12-25 13:26:08] ERROR[9635][C-00000ee2] pbx_functions.c: Function PJSIP_HEADER not registered
15933 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-exten-vm:17] ExecIf(“SIP/incoming-00000145”, “0?MacroExit()”) in new stack
15934 [2020-12-25 13:26:08] ERROR[9635][C-00000ee2] pbx_functions.c: Function PJSIP_HEADER not registered
15935 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-exten-vm:18] Gosub(“SIP/incoming-00000145”, “sub-record-check,s,1(exten,3000,dontcare)”) in new stack
15936 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@sub-record-check:1] GotoIf(“SIP/incoming-00000145”, “12?initialized”) in new stack
15937 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx_builtins.c: Goto (sub-record-check,s,10)
15938 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@sub-record-check:10] NoOp(“SIP/incoming-00000145”, “Recordings initialized”) in new stack
15939 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@sub-record-check:11] ExecIf(“SIP/incoming-00000145”, “0?Set(ARG3=dontcare)”) in new stack
15940 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@sub-record-check:12] Set(“SIP/incoming-00000145”, “REC_POLICY_MODE_SAVE=”) in new stack
15941 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@sub-record-check:13] ExecIf(“SIP/incoming-00000145”, “0?Set(REC_STATUS=NO)”) in new stack
15942 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@sub-record-check:14] GotoIf(“SIP/incoming-00000145”, “5?checkaction”) in new stack
15943 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx_builtins.c: Goto (sub-record-check,s,17)
15944 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@sub-record-check:17] GotoIf(“SIP/incoming-00000145”, “1?sub-record-check,exten,1”) in new stack
15945 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx_builtins.c: Goto (sub-record-check,exten,1)
15946 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [exten@sub-record-check:1] NoOp(“SIP/incoming-00000145”, “Exten Recording Check between +316xxxxxxxx and 3000”) in new stack
15947 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [exten@sub-record-check:2] Set(“SIP/incoming-00000145”, “CALLTYPE=external”) in new stack
15948 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [exten@sub-record-check:3] ExecIf(“SIP/incoming-00000145”, “0?Set(CALLTYPE=)”) in new stack
15949 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [exten@sub-record-check:4] Set(“SIP/incoming-00000145”, “CALLEE=dontcare”) in new stack
15950 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [exten@sub-record-check:5] ExecIf(“SIP/incoming-00000145”, “0?Set(CALLEE=dontcare)”) in new stack
15951 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [exten@sub-record-check:6] GotoIf(“SIP/incoming-00000145”, “1?callee”) in new stack
15952 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx_builtins.c: Goto (sub-record-check,exten,11)
15953 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [exten@sub-record-check:11] Gosub(“SIP/incoming-00000145”, “recordcheck,1(dontcare,external,3000)”) in new stack
15954 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [recordcheck@sub-record-check:1] NoOp(“SIP/incoming-00000145”, “Starting recording check against dontcare”) in new stack
15955 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [recordcheck@sub-record-check:2] Goto(“SIP/incoming-00000145”, “dontcare”) in new stack
15956 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx_builtins.c: Goto (sub-record-check,recordcheck,3)
15957 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [recordcheck@sub-record-check:3] Return(“SIP/incoming-00000145”, “”) in new stack
15958 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [exten@sub-record-check:12] Return(“SIP/incoming-00000145”, “”) in new stack
15959 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-exten-vm:19] GotoIf(“SIP/incoming-00000145”, “1?macrodial”) in new stack
15960 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx_builtins.c: Goto (macro-exten-vm,s,25)
15961 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-exten-vm:25] GosubIf(“SIP/incoming-00000145”, “0?clrheader,1()”) in new stack
15962 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-exten-vm:26] Macro(“SIP/incoming-00000145”, “dial-one,HhTtr,3000”) in new stack
15963 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-dial-one:1] Set(“SIP/incoming-00000145”, “DEXTEN=3000”) in new stack
15964 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-dial-one:2] Set(“SIP/incoming-00000145”, “__CRM_SOURCE=+316xxxxxxxx”) in new stack
15965 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-dial-one:3] ExecIf(“SIP/incoming-00000145”, “0?Set(__EXTTOCALL=3000)”) in new stack
15966 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-dial-one:4] Set(“SIP/incoming-00000145”, “DIALSTATUS_CW=”) in new stack
15967 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-dial-one:5] GosubIf(“SIP/incoming-00000145”, “0?screen,1()”) in new stack
15968 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-dial-one:6] GosubIf(“SIP/incoming-00000145”, “0?cf,1()”) in new stack
15969 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-dial-one:7] GotoIf(“SIP/incoming-00000145”, “1?skip1”) in new stack
15970 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx_builtins.c: Goto (macro-dial-one,s,10)
15971 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-dial-one:10] GotoIf(“SIP/incoming-00000145”, “0?nodial”) in new stack
15972 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-dial-one:11] GotoIf(“SIP/incoming-00000145”, “0?continue”) in new stack
15973 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-dial-one:12] Set(“SIP/incoming-00000145”, “EXTHASCW=ENABLED”) in new stack
15974 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-dial-one:13] GotoIf(“SIP/incoming-00000145”, “0?next1:cwinusebusy”) in new stack
15975 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx_builtins.c: Goto (macro-dial-one,s,25)
15976 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-dial-one:25] GotoIf(“SIP/incoming-00000145”, “0?next3:continue”) in new stack
15977 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx_builtins.c: Goto (macro-dial-one,s,27)
15978 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-dial-one:27] GotoIf(“SIP/incoming-00000145”, “0?nodial”) in new stack
15979 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-dial-one:28] GosubIf(“SIP/incoming-00000145”, “1?dstring,1():dlocal,1()”) in new stack
15980 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [dstring@macro-dial-one:1] Set(“SIP/incoming-00000145”, “DSTRING=”) in new stack
15981 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [dstring@macro-dial-one:2] Set(“SIP/incoming-00000145”, “DEVICES=3000”) in new stack
15982 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [dstring@macro-dial-one:3] ExecIf(“SIP/incoming-00000145”, “0?Return()”) in new stack
15983 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [dstring@macro-dial-one:4] ExecIf(“SIP/incoming-00000145”, “0?Set(DEVICES=000)”) in new stack
15984 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [dstring@macro-dial-one:5] Set(“SIP/incoming-00000145”, “LOOPCNT=1”) in new stack
15985 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [dstring@macro-dial-one:6] Set(“SIP/incoming-00000145”, “ITER=1”) in new stack
15986 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [dstring@macro-dial-one:7] Set(“SIP/incoming-00000145”, “THISDIAL=SIP/3000”) in new stack
15987 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [dstring@macro-dial-one:8] GotoIf(“SIP/incoming-00000145”, “1?docheck”) in new stack
15988 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx_builtins.c: Goto (macro-dial-one,dstring,14)
15989 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [dstring@macro-dial-one:14] GotoIf(“SIP/incoming-00000145”, “0?skipset”) in new stack
15990 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [dstring@macro-dial-one:15] Set(“SIP/incoming-00000145”, “DSTRING=SIP/3000&”) in new stack
15991 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [dstring@macro-dial-one:16] Set(“SIP/incoming-00000145”, “ITER=2”) in new stack
15992 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [dstring@macro-dial-one:17] GotoIf(“SIP/incoming-00000145”, “0?begin”) in new stack
15993 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [dstring@macro-dial-one:18] ExecIf(“SIP/incoming-00000145”, “0?Return()”) in new stack
15994 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [dstring@macro-dial-one:19] Set(“SIP/incoming-00000145”, “DSTRING=SIP/3000”) in new stack
15995 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [dstring@macro-dial-one:20] Return(“SIP/incoming-00000145”, “”) in new stack
15996 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-dial-one:29] GotoIf(“SIP/incoming-00000145”, “0?nodial”) in new stack
15997 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-dial-one:30] GotoIf(“SIP/incoming-00000145”, “0?skiptrace”) in new stack
15998 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [s@macro-dial-one:31] GosubIf(“SIP/incoming-00000145”, “1?ctset,1():ctclear,1()”) in new stack
15999 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [ctset@macro-dial-one:1] Set(“SIP/incoming-00000145”, “DB(CALLTRACE/3000)=+316xxxxxxxx”) in new stack
16000 [2020-12-25 13:26:08] VERBOSE[9635][C-00000ee2] pbx.c: Executing [ctset@macro-dial-one:2] Return(“SIP/incoming-00000145”, “”) in new stack
16001


(James Zhu) #2

no idea for your caller, is a sip phone or analog fxs? the phone is regiested wihtout error? if it is a sip phone, when pressing any key, you should hear the dialtone unless somesetting wrong in your sip phone. If it is a fxs, you may check the setting for fxs.


(robin1196) #3

Hello James,
Thanks for your reaction.
The phone i use to call is an iPhone with an number i have from a mobile operator.
It’s not a sip phone.
Also when i’m calling with a sip phone directly to the extension i also don’t hear a dail tone.
Hope this is the information you are looking for.