Paging group issue

Hi group,

I have setup paging group but it is not working. When I dial the paging group no, all phones beep and then disconnected. Btw, intercom is working. The system is elastix 2.0.3 and freepbx 2.8.

Lou

== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
– Executing [301@from-internal:1] Answer(“SIP/109-0000006b”, “”) in new stack
– Executing [301@from-internal:2] Macro(“SIP/109-0000006b”, “user-callerid,”) in new stack
– Executing [s@macro-user-callerid:1] Set(“SIP/109-0000006b”, “AMPUSER=109”) in new stack
– Executing [s@macro-user-callerid:2] GotoIf(“SIP/109-0000006b”, “0?report”) in new stack
– Executing [s@macro-user-callerid:3] ExecIf(“SIP/109-0000006b”, “1?Set(REALCALLERIDNUM=109)”) in new stack
– Executing [s@macro-user-callerid:4] Set(“SIP/109-0000006b”, “AMPUSER=109”) in new stack
– Executing [s@macro-user-callerid:5] Set(“SIP/109-0000006b”, “AMPUSERCIDNAME=Dr SZ”) in new stack
– Executing [s@macro-user-callerid:6] GotoIf(“SIP/109-0000006b”, “0?report”) in new stack
– Executing [s@macro-user-callerid:7] Set(“SIP/109-0000006b”, “AMPUSERCID=109”) in new stack
– Executing [s@macro-user-callerid:8] Set(“SIP/109-0000006b”, “CALLERID(all)=“Dr SZ” <109>”) in new stack
– Executing [s@macro-user-callerid:9] ExecIf(“SIP/109-0000006b”, “0?Set(CHANNEL(language)=)”) in new stack
– Executing [s@macro-user-callerid:10] GotoIf(“SIP/109-0000006b”, “0?continue”) in new stack
– Executing [s@macro-user-callerid:11] Set(“SIP/109-0000006b”, “__TTL=64”) in new stack
– Executing [s@macro-user-callerid:12] GotoIf(“SIP/109-0000006b”, “1?continue”) in new stack
– Goto (macro-user-callerid,s,19)
– Executing [s@macro-user-callerid:19] Set(“SIP/109-0000006b”, “CALLERID(number)=109”) in new stack
– Executing [s@macro-user-callerid:20] Set(“SIP/109-0000006b”, “CALLERID(name)=Dr SZ”) in new stack
– Executing [s@macro-user-callerid:21] NoOp(“SIP/109-0000006b”, “Using CallerID “Dr SZ” <109>”) in new stack
– Executing [301@from-internal:3] Set(“SIP/109-0000006b”, “_AMPUSER=109”) in new stack
– Executing [301@from-internal:4] Set(“SIP/109-0000006b”, “_SIPURI=”) in new stack
– Executing [301@from-internal:5] Set(“SIP/109-0000006b”, “_ALERTINFO=Alert-Info: Ring Answer”) in new stack
– Executing [301@from-internal:6] Set(“SIP/109-0000006b”, “_CALLINFO=Call-Info: ;answer-after=0”) in new stack
– Executing [301@from-internal:7] Set(“SIP/109-0000006b”, “_SIPURI=intercom=true”) in new stack
– Executing [301@from-internal:8] Set(“SIP/109-0000006b”, “_DOPTIONS=A(beep)”) in new stack
– Executing [301@from-internal:9] Set(“SIP/109-0000006b”, “_DTIME=5”) in new stack
– Executing [301@from-internal:10] Set(“SIP/109-0000006b”, “_ANSWERMACRO=”) in new stack
– Executing [301@from-internal:11] Set(“SIP/109-0000006b”, “__FORWARD_CONTEXT=block-cf”) in new stack
– Executing [301@from-internal:12] Page(“SIP/109-0000006b”, “LOCAL/PAGE107@ext-paging&LOCAL/PAGE108@ext-paging”) in new stack
– Called PAGE107@ext-paging
– Called PAGE108@ext-paging
– <SIP/109-0000006b> Playing ‘beep.gsm’ (language ‘en’)
– Executing [PAGE107@ext-paging:1] GotoIf(“Local/PAGE107@ext-paging-de98;2”, “0?skipself”) in new stack
– Executing [PAGE107@ext-paging:2] ChanIsAvail(“Local/PAGE107@ext-paging-de98;2”, “SIP/107,s”) in new stack
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
– Executing [PAGE107@ext-paging:3] GotoIf(“Local/PAGE107@ext-paging-de98;2”, “0?skipself”) in new stack
– Executing [PAGE107@ext-paging:4] GotoIf(“Local/PAGE107@ext-paging-de98;2”, “0?skipself”) in new stack
– Executing [PAGE107@ext-paging:5] Macro(“Local/PAGE107@ext-paging-de98;2”, “autoanswer,107”) in new stack
– Executing [s@macro-autoanswer:1] Set(“Local/PAGE107@ext-paging-de98;2”, “DIAL=SIP/107”) in new stack
– Executing [s@macro-autoanswer:2] ExecIf(“Local/PAGE107@ext-paging-de98;2”, “0?Set(DIAL=DAHDI/107)”) in new stack
– Executing [s@macro-autoanswer:3] GotoIf(“Local/PAGE107@ext-paging-de98;2”, “0?macro”) in new stack
– Executing [s@macro-autoanswer:4] Set(“Local/PAGE107@ext-paging-de98;2”, “phone=Cisco/SPA504G-7.4.8a”) in new stack
– Executing [s@macro-autoanswer:5] ExecIf(“Local/PAGE107@ext-paging-de98;2”, “0?Set(CALLINFO=Call-Info: sip:broadworks.net;answer-after=0)”) in new stack
– Executing [s@macro-autoanswer:6] ExecIf(“Local/PAGE107@ext-paging-de98;2”, “1?SipAddHeader(Alert-Info: Ring Answer)”) in new stack
– Executing [s@macro-autoanswer:7] ExecIf(“Local/PAGE107@ext-paging-de98;2”, “1?SipAddHeader(Call-Info: ;answer-after=0)”) in new stack
– Executing [s@macro-autoanswer:8] ExecIf(“Local/PAGE107@ext-paging-de98;2”, “1?Set(__SIP_URI_OPTIONS=intercom=true)”) in new stack
– Executing [PAGE107@ext-paging:6] Dial(“Local/PAGE107@ext-paging-de98;2”, “SIP/107,5,A(beep)”) in new stack
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
– Called 107
– Executing [PAGE108@ext-paging:1] GotoIf(“Local/PAGE108@ext-paging-5abd;2”, “0?skipself”) in new stack
– Executing [PAGE108@ext-paging:2] ChanIsAvail(“Local/PAGE108@ext-paging-5abd;2”, “SIP/108,s”) in new stack
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
– Executing [PAGE108@ext-paging:3] GotoIf(“Local/PAGE108@ext-paging-5abd;2”, “0?skipself”) in new stack
– Executing [PAGE108@ext-paging:4] GotoIf(“Local/PAGE108@ext-paging-5abd;2”, “0?skipself”) in new stack
– Executing [PAGE108@ext-paging:5] Macro(“Local/PAGE108@ext-paging-5abd;2”, “autoanswer,108”) in new stack
– Executing [s@macro-autoanswer:1] Set(“Local/PAGE108@ext-paging-5abd;2”, “DIAL=SIP/108”) in new stack
– Executing [s@macro-autoanswer:2] ExecIf(“Local/PAGE108@ext-paging-5abd;2”, “0?Set(DIAL=DAHDI/108)”) in new stack
– Executing [s@macro-autoanswer:3] GotoIf(“Local/PAGE108@ext-paging-5abd;2”, “0?macro”) in new stack
– Executing [s@macro-autoanswer:4] Set(“Local/PAGE108@ext-paging-5abd;2”, “phone=Cisco/SPA504G-7.4.8a”) in new stack
– Executing [s@macro-autoanswer:5] ExecIf(“Local/PAGE108@ext-paging-5abd;2”, “0?Set(CALLINFO=Call-Info: sip:broadworks.net;answer-after=0)”) in new stack
– Executing [s@macro-autoanswer:6] ExecIf(“Local/PAGE108@ext-paging-5abd;2”, “1?SipAddHeader(Alert-Info: Ring Answer)”) in new stack
– Executing [s@macro-autoanswer:7] ExecIf(“Local/PAGE108@ext-paging-5abd;2”, “1?SipAddHeader(Call-Info: ;answer-after=0)”) in new stack
– Executing [s@macro-autoanswer:8] ExecIf(“Local/PAGE108@ext-paging-5abd;2”, “1?Set(__SIP_URI_OPTIONS=intercom=true)”) in new stack
– Executing [PAGE108@ext-paging:6] Dial(“Local/PAGE108@ext-paging-5abd;2”, “SIP/108,5,A(beep)”) in new stack
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
– Called 108
– SIP/107-0000006d answered Local/PAGE107@ext-paging-de98;2
– <SIP/107-0000006d> Playing ‘beep.gsm’ (language ‘en’)
– SIP/108-0000006f answered Local/PAGE108@ext-paging-5abd;2
– <SIP/108-0000006f> Playing ‘beep.gsm’ (language ‘en’)
== Spawn extension (ext-paging, PAGE107, 6) exited non-zero on ‘Local/PAGE107@ext-paging-de98;2’
== Spawn extension (from-internal, 301, 12) exited non-zero on ‘SIP/109-0000006b’
– Executing [h@from-internal:1] Macro(“SIP/109-0000006b”, “hangupcall”) in new stack
– Executing [s@macro-hangupcall:1] GotoIf(“SIP/109-0000006b”, “1?noautomon”) in new stack
– Goto (macro-hangupcall,s,3)
– Executing [s@macro-hangupcall:3] NoOp(“SIP/109-0000006b”, “TOUCH_MONITOR_OUTPUT=”) in new stack
– Executing [s@macro-hangupcall:4] GotoIf(“SIP/109-0000006b”, “1?noautomon2”) in new stack
– Goto (macro-hangupcall,s,6)
– Executing [s@macro-hangupcall:6] NoOp(“SIP/109-0000006b”, “MONITOR_FILENAME=”) in new stack
– Executing [s@macro-hangupcall:7] GotoIf(“SIP/109-0000006b”, “1?skiprg”) in new stack
– Goto (macro-hangupcall,s,10)
– Executing [s@macro-hangupcall:10] GotoIf(“SIP/109-0000006b”, “1?skipblkvm”) in new stack
– Goto (macro-hangupcall,s,13)
– Executing [s@macro-hangupcall:13] GotoIf(“SIP/109-0000006b”, “1?theend”) in new stack
– Goto (macro-hangupcall,s,15)
– Executing [s@macro-hangupcall:15] Hangup(“SIP/109-0000006b”, “”) in new stack
== Spawn extension (macro-hangupcall, s, 15) exited non-zero on ‘SIP/109-0000006b’ in macro ‘hangupcall’
== Spawn extension (from-internal, h, 1) exited non-zero on ‘SIP/109-0000006b’
== Spawn extension (ext-paging, PAGE108, 6) exited non-zero on ‘Local/PAGE108@ext-paging-5abd;2’

I’m having the same problem on two different servers.

Both CentOS boxes are running FreePBX 2.9.0.7 with Asterisk 2.6.20.

Phones are a mix of Linksys SPA9xx & Cisco SPA 5xx which I’ve had working with older installations of Asterisk/FreePBX.

I’m having the same issue… I hope someone will provide an answer… We are running asterisk 2.8

I found the following post over the weekend stating that DAHDI had to be installed and running for paging to work. I did so and tested it successfully this morning.

http://www.freepbx.org/forum/freepbx/general-help/paging-intercom-not-working