so my outbound stopped working today here is my setup. Not really sure what happened.
Trunk page
Trunk name : Charter
Peer Details
type=peer
reinvite=no
nat=no
host=192.168.34.254
dtmfmode=rfc2833&inband
device port=5060
canreinvite=no
qualify=yes
user context - from-trunk
user details
type=peer
reinvite=no
port=5060
nat=yes
host=192.168.34.254
dtmfmode=rfc2833&inband
context=from-trunk
canreinvite=no
qualify=yes
outbound page
1800NXXXXXX
1855NXXXXXX
1866NXXXXXX
1877NXXXXXX
1888NXXXXXX
1NXXNXXXXXX
411
911
NXXNXXXXXX
NXXXXXX
running
PBX Firmware: 6.12.65-28
PBX Service Pack: 1.0.0.0
this is running asterisk -rvv
Connected to Asterisk 11.18.0 currently running on localhost (pid = 2404)
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
== Extension Changed 128[ext-local] new state InUse for Notify User 142
== Extension Changed 128[ext-local] new state InUse for Notify User 104
== Extension Changed 128[ext-local] new state InUse for Notify User 100
== Extension Changed 128[ext-local] new state InUse for Notify User 100
[2015-06-17 12:17:53] WARNING[4412][C-0000000b]: pbx.c:6709 __ast_pbx_run: Chann el ‘SIP/128-00000007’ sent to invalid extension but no invalid handler: context, exten,priority=restrictedroute-cfcd208495d565ef66e7dff9f98764da,18666033199,2
== Extension Changed 128[ext-local] new state Idle for Notify User 142 (queued )
== Extension Changed 128[ext-local] new state Idle for Notify User 104 (queued )
== Extension Changed 128[ext-local] new state Idle for Notify User 100 (queued )
== Extension Changed 128[ext-local] new state Idle for Notify User 100 (queued )