Outband CID setting

I had two sip trunk connected. I could like ext. 2222 one sip trunk is range is 12340000-12349999 and other range is 56780000-56789999. I want to dial 9+XXXXXX will show 12342222 and dial 8+XXXXXXX will show 56782222. If usinfg ext. 2255 one sip trunk is range is 12340000-12349999 and other range is 56780000-56789999. I want to dial 9+XXXXXX will show 12342255 and dial 8+XXXXXXX will show 56782255 But in outbounds route the field Route CID cannot do the (1234+variable or 5678+variable). Anyone know how can I do it?

https://wiki.freepbx.org/display/FPG/Outbound+Routes+Configuration+Examples
https://wiki.freepbx.org/display/FPG/Outbound+Routes+Module
https://wiki.freepbx.org/display/FPG/Outbound+Routes+Module+User+Guide

1 Like

I had read but not really understand what should I entry. Can suggest to me?

it sounds like you might benefit from paying someone else to manage this for you…

However:
Outbound route 1 : has callerID #1
set the Dial Patterns to match what you want to use (in my case, *36) as the Prefix

so, if I dial *36 (phonenumber), it will call (phonenumber) from the callerID I set on this route

repeat for your other callerIDs,
set another option for no prefix (your default callerID)

save, apply, and test.

I had follow your instruction it still not showing the added CLI prefix. Because difference ext will show difference prefix CLI when choose difference trunk.looks complicated.

Sounds like it might be time to get someone to help you get things setup. See if this video helps 20 - Outbound Routes - FreePBX 101 v15 - YouTube, otherwise you can get paid support from Sangoma or one of the members of this forum.

This topic was automatically closed 31 days after the last reply. New replies are no longer allowed.