Operator Panel page doesn't load

Hi, I actually never tried to enter this module before so I’m not sure if it was like that out of the box or not.
Anyhow, on the index page, I tried to enter the “Operator Panel” but it sends me to an error page:
“This site can’t be reached
pbx1.vlit.pro refused to connect.”

iSymphony is shown as a service on the firewall module (and my IP is set as Trusted Network). Just in case, I also added the port 58080 to the firewall module under “custom services” (and hit save), but it didn’t change much.

Is there anything else I need to do to make it work?

P.S. iSymphonyV3 13.0.4.1 is installed and enabled.

Thanks!

If I remember correctly only the module is installed with FreePBX but you still have to install the server portion of it to get it all to work together. Here is a guide that i used a while back to get it going:

http://docs.getisymphony.com/display/ISYMDOCS/FreePBX%2C+Elastix+and+PBX+in+a+Flash+Installation

If you already did that, try running netstat -an to see if the service is actually listening on those ports.

Hope this helps.